Sani Bot D3 CPAP Mask Cleaner

Sani Bot D3 CPAP Mask sanitizer cleaning machine

Sani Bot d3 CPAP mask sanitizer cleaning machine will ensure that your CPAP mask is rendered free from any relentless bacteria that other machines cannot remove.

Proper hygiene for your sleep apnea mask is necessary to avoid inhaling any harmful residues that stay in the mask even after cleaning. That is why you need a deep cleansing, heavy-duty machine to get satisfaction when you use the mask next time without any doubts about the disinfection. Sani Bot D3 is the CPAP mask cleaner and sanitizer that you need for complete sterilization.

WHAT IS Sani Bot d3 CPAP mask sanitizer cleaning machine ?

Sani Bot D3 is a CPAP machine disinfectant that provides a safe and sure way to get rid of any harmful residues in your sleep apnea mask equipment.

The machine uses tap water, ultrasound, and effective disinfectant tablets to decontaminate your CPAP machine. The cavitations that form bubbles get into the nooks and corners to give a thorough cleansing to the crevices of your CPAP mask and its accessories.

USING THE SANI BOT D3

Sani Bot D3 has a stainless steel reservoir and premium quality transducers featuring a simple touch screen control panel that gives you the option between normal cleaning and deep cleansing. This helps you to remove dirt, oil and other residues which are harmful for inhaling.

The following steps show you how to use the Sani Bot D3 machine:

STEP 1: Place the mask in the basket (reservoir) and add hot tap water until the mask is submerged. You can also clean your tubing (heated tubing can be cleaned without any problem).

STEP 2: Add the disinfectant tablets to the water (you will get 60 tablets on purchase of the Sani Bot D3)

STEP 3: Connect the cord and turn on the switch.

STEP 4: Select the timer according to your preference from 0 to 30 minutes

STEP 5: Turn the heater on to keep the water hot

STEP 6: Once done, carefully remove the basket holding from its handle, minding the hot water.

STEP 7: Through the outlet drain out all water, place your mask or tubing in the basket and allow it to dry.

And if you want to clean the machine, just follow these simple instructions:

• Do not leave the disinfectant tablet water in the machine for more than 6 hours
• •Drain out the tablet water, add tap water again and set your timer for 30 to 90 seconds which will clean out any residues left in your machine
• •Let the water out and wipe with a dry towel

BENEFITS OF SANI BOT D3

With the Sani Bot D3 home sanitizer, you can conduct full medical disinfection in the comfort of your home. It will help you to remove all nasty bacteria, molds, and mildew from your CPAP equipment effectively.

This cleaner can clean your mask satisfactorily and save money on supplies as well. The machine works silently without giving you the nuisance of noise, leaving your equipment clean and shiny.

There is no residue of smell, unlike the other machines that activate oxygen for disinfection.

PROS

• Does not use ozone which is considered to have no effect on the cleansing process
• User-friendly and does not need many instructions
• Fabric mask and headgear can be cleaned without damaging the fabric
• Can use hard water as well
• All mask types and brands are compatible as long as they fit inside the reservoir
• Easy to operate with its simple control panel
• Can clean anything that needs deep sanitization
• No foul odor compared to other ozone based sanitizers that causes slight headache
• Motor makes little to no noise

CONS

• Tubings and other accessories need to be disconnected and cleaned separately as basin measures only 9.6 x 5.9 x 3.0 inches

• Cannot be used on a daily basis since it takes a relatively long time

• Full-sized unit the reservoirs can be too big to fit

• When washing fabric masks, disinfectant tablets may leave residues of faint stains

• Users manual not provided

SANI BOT D3 VS SOCLEAN

• Cleaning : SoClean uses Ozone to change oxygen but doesn’t remove any debris while Sani Bot D3 uses water, cleansing tablets and transducers that generate ultrasound which deeply cleans the CPAP equipment.
• Noise level : While Sani Bot D3 is quiet, the motor of Soclean is so noisy that it is usually activated when there is no one at home so that they won’t have to listen to the annoying sound.
• Ease of Cleaning: SoClean accessories don’t need to be disassembled while Sani Bot D3 has to part with its tubings and other parts to fit in the basin.
• Size: The size of Sani Bot D3 is quite big compared to SoClean making it hard to place it anywhere unlike SoClean cleaners.
• User Manual: Costumers complain about not receiving any user’s manual on purchase of Sani Bot, while SoClean customers complain about a very confusing and unhelpful instruction manual.
• Adapter : Sani Bot D3 doesn’t need any adapter as opposed to SoClean.
• Sanitization Time: In a Sani Bot D3, the time taken to disinfect your CPAP mask completely is not more than 30 minutes, whereas SoClean needs to keep the mask in the machine for at least 2 hours to fully sanitize it.
• Provision for Drying : After cleansing, you can place the mask and accessories on a drying rack to drain excess water, but SoClean doesn’t provide such features.
• Warranty : While SoClean offers a 2-year warranty, Sani Bot guarantees a warranty of 3 years.

SUMMARY

Sani Bot D3 is a completely automated device that allows you to disinfect your CPAP equipment in an easy way which will save you both time and money. If you want to keep your CPAP machine clean and free from harmful bacteria, Sani Bot D3 is reviewed to be one of the most sought after CPAP mask sanitizer. What more reasons does one need to get one of this for a bacteria-free CPAP mask?

https://soundcloud.com/cpapcleaner/sani-bot-d3-cpap-mask-sanitizer-cleaning-machine