Mativenga, P.T. and A. Mubashar, White layer formation and tool wear in high speed milling of 57HRc tool steel using coated and uncoated tools. Int. J. of Agile Systems and Management, 2007. 2(2): p. 172-185.
Mubashar, A., I.A. Ashcroft, G.W. Critchlow, and A.D. Crocombe, Modelling cyclic moisture uptake in an epoxy adhesive. J. Adhesion, 2009. 85: p. 711-735.
Mubashar, A., I.A. Ashcroft, G.W. Critchlow, and A.D. Crocombe, Moisture absorption-desorption effects in adhesive joints. Int. J. Adhesion and Adhesives, 2009. 29(8): p. 751-760.
Mubashar, A., I.A. Ashcroft, G.W. Critchlow, and A.D. Crocombe, Strength prediction of adhesive joints after cyclic moisture conditioning using a cohesive zone model. Engineering Fracture Mechanics, 2011. 78(16): p. 2746-2760.
Mubashar, A., I.A. Ashcroft, G.W. Critchlow, and A.D. Crocombe, A method of predicting the stresses in adhesive joints after cyclic moisture conditioning. The Journal of Adhesion, 2011. 87(9): p. 926-950.
Mubashar, A., I.A. Ashcroft, and A.D. Crocombe, Modelling Damage and Failure in Adhesive Joints Using A Combined XFEM-Cohesive Element Methodology. The Journal of Adhesion, 2014. 90(8): p. 682-697.
Akram, S., S.H.I. Jaffery, M. Khan, A. Mubashar, and L. Ali, A Numerical Investigation of Effects of Cutting Velocity and Feed Rate on Residual Stresses in Aluminum Alloy Al-6061. International Journal of Materials, Mechanics and Manufacturing, 2015. 3(1): p. 26-30.
Batool, S., M. Khan, S.H.I. Jaffery, A. Khan, A. Mubashar, L. Ali, N. Khan, and M.N. Anwar, Analysis of Weld Characteristics of Micro-Plasma Arc Welding (MPAW) and Tungsten Inert Gas Welding (TIG) of Thin Stainless Steel (304L) Sheets. Journal of Materials: Design and Applications, 2015.
Jaffery, S.H.I., S. Sadiq, M. Khan, L. Ali, N. Anwar, and A. Mubahsar, Use of Wear Map Approach in Optimization of Drilling Parameters for Petroleum Exploration. International Journal of Mechanical And Production Engineering, 2015. 3(6): p. 63-65.
Rehman, S.u., M. Khan, A.N. Khan, S.H.I. Jaffery, L. Ali, and A. Mubashar, Improvement in the Mechanical Properties of High Temperature Shape Memory Alloy (Ti50Ni25Pd25) by Copper Addition. Advances in Materials Science and Engineering, 2015. 2015: p. 7.
Saif-ur-Rehman, M. Khan, L. Ali, S.H.I. Jaffery, and A. Mubashar, Effect of Cu Addition on Microstructure and Transformation Temperatures of Ti50Ni25Pd25 High Temperature Shape Memory Alloy. International Journal of Mechanical And Production Engineering, 2015. 3(6): p. 96-100.
Masood, T., A. Mubashar, and J.A. Khan, Techniques used in the simulation and control of PROTEC comptuer numerically controlled (CNC) machine software, in IEEE ICIT '02. 2002 IEEE International Conference. 2002, IEEE: Bangkok, Thailand. p. 504-509.
Mubashar, A., I.A. Ashcroft, G.W. Critchlow, and A.D. Crocombe. Strength Recovery in Epoxy Adhesive Joints under Cyclic Moisture Conditioning Environment. in ACE-X 2009 3rd International Conference on Advanced Computational Engineering and Experimenting. 2009. Rome, Italy.
Akram, S., S.H.I. Jaffery, M. Khan, A. Mubashar, and L. Ali. A Numerical Investigation of Effects of Cutting Velocity and Feed Rate on Residual Stresses in Aluminum Alloy Al-6061. in ICIEA 2014, International Conference on Industrial Engineering and Applications. 2014. Sydney Australia: Science and Engineering Institute.
Jaffery, S.H.I., S. Sadiq, M. Khan, L. Ali, N. Anwar, and A. Mubahsar. Use of Wear Map Approach in Optimization of Drilling Parameters for Petroleum Exploration. in International Conference on Engineering and Natural Science. 2015. London, United Kingdom: International Institute of Engineers and Researchers.
Khan, M., S.H.I. Jaffery, and A. Mubashar. Finite Element Analysis of Knee Implant for Orthopaedic Applications. in International Conference on Medical, Biological and Pharmaceutical Sciences. 2015. London, United Kingdom: International Institute of Engineers and Researchers.
Saif-ur-Rehman, M. Khan, L. Ali, S.H.I. Jaffery, and A. Mubashar. Effect of Cu Addition on Microstructure and Transformation Temperatures of Ti50Ni25Pd25 High Temperature Shape Memory Alloy. in International Conference on Mechanical, Aeronautics and Production Engineering. 2015. London, United Kingdom: International Institute of Engineers and Researchers.
A. Azam, A. Mubashar, I.A. Ashcroft, E. Uddin, S.H.I. Jaffery, A numerical study of the effect of ply-layup on the strength and stiffness of a composite T-joint under three point bending, Journal of Adhesion Science and Technology, (2017) 1-15.
M.W. Ali, A. Mubashar, E. Uddin, S.W.U. Haq, M. Khan, An experimental and numerical investigation of the ballistic response of multi-level armour against armour piercing projectiles, International Journal of Impact Engineering. https://doi.org/10.1016/j.ijimpeng.2017.04.028
A. Munir, A. Mubashar, I.A. Ashcroft, E. Uddin, S. Waheed, Investigation of ballistic response of a multilayer armour box against a high velocity kinetic energy projectile, in: 11th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2017, Vienna, Austria, 2017.
Lucas F. M. da Silva, Andreas Öchsner, Robert D. Adams (Eds) “Handbook of Adhesion Technology” by Springer-Verlag, Berlin Heidelberg, Germany, 2011.
Raul D. S. G. Campilho (Ed) "Strength Prediction of Adhesively-Bonded Joints" by CRC Press, 2017
JOURNAL PAPERS
1.
A. Mujtaba, U. Latif, E. Uddin, M. Y. Younis, J. Aslam, Z. Ali and A. Abdelkefi, Hydrodynamic energy harvesting analysis of two piezoelectric tandem flags under the influence of wakes of upstream body, Applied energy, Revised 2020
2.
U. Latif, E. Uddin, M. Y. Younis, Z. Ali, M. Sajid, A. Mubashar and A. Abdelkefi, Comparison of solid and hollow bluff bodies on performance and dynamics of flag-based energy harvesters, Energy, Revised 2020
3.
U. Latif, E. Uddin, M. Y. Younis, J. Aslam, Z. Ali, M. Sajid and A. Abdelkefi, Experimental electro-hydrodynamic investigation of flag-based energy harvesting in the wake of inverted C-shape cylinder, Renewable Energy, Submitted 2020
4.
Muhammad Rehan Naseer, Emad Uddin, Aamir Mubashar, Muhammad Sajid, Zaib Ali and Khalid Akhtar, Numerical investigation of hydrodynamic and hydroacoustic performance of underwater propeller operating in off design flow conditions, Journal of Marine Engineering & Technology, Revised 2020
5.
Chaudhary Abdullah, Asfandyar Arshad, Tayyab Gulfaraz, Emad Uddin, Usman Latif, Numerical simulation of tandem flags in the wake of a bluff body, Journal of fluids and structures, Submitted 2020
6.
Abdul Hadi Butt, Bilal Akbar, Jawad Aslam, Naveed Akram, Manzoore Elahi M Soudagar, Fausto Pedro García Márquez , Md. Yamin Younis, Emad Uddin, Development of a Linear Acoustic Array for Aero-Acoustic Quantification of Camber-Bladed Vertical Axis Wind Turbine, Sensors, Accepted 2020
7.
Raja M. Asim Feroz, Adeel Javed, Abdul Haseeb Syed, Syed Ali Abbas Kazmi, Emad Uddin, Wind speed and power forecasting of a utility-scale wind farm with inter-farm wake interference and seasonal variation, Sustainable Energy Technologies and Assessments, Volume 42, December 2020, https://doi.org/10.1016/j.seta.2020.100882.
8.
Muhammad Zia Ullah Khan, Emad Uddin, Bilal Akbar, Naveed Akram, Ali Ammar Naqvi, Muhammad Sajid, Zaib Ali, Md. Yamin Younis and Fausto Pedro García Márquez, Investigation of heat transfer and pressure drop in micro channel heat sink using Al2O3 and ZrO2 nanofluids, Nanomaterials, Sep 2020, doi: 0.3390/nano10091796
9.
Usman Latif; Ehtisham Ali; Emad Uddin; Zaib Ali; Muhammad Sajid; Samiur Shah; Muhammad Yamin Younis, Experimental Investigation of Energy Harvesting Eel in the Wake of Bluff Body under Ocean Waves, Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, (August 2020). doi:10.1177/1475090220949334.
10.
Muhammad Usman, Muhammad Sajid, Emad Uddin, Yasar Ayaz, Investigation of Zero Moment Point in a Partially Filled Liquid Vessel Subjected to Roll Motion. Appl. Sci. 2020, 10, 3992.
11.
Zaki, Sana, Emad Uddin, and Aamir Mubashar. “Experimental Investigation of Impact of Long Rod Eroding Projectiles against Rolled Homogeneous Armour.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, (July 2020) doi:10.1177/1464420720940766
12.
Adeel Javed, Tariq Ullah, Ali Abdullah, Majid Ali, Emad Uddin, Computational Evaluation of an Optimum Leading-Edge Slat Deflection Angle for Dynamic Stall Control in a Novel Urban-Scale Vertical Axis Wind Turbine for Low Wind Speed Operation, Sustainable Energy Technologies and Assessments, Volume 40, August 2020, 100748
13.
Usman Latif, Emad Uddin, Chaudary Abdullah, Zaib Ali, Muhammad Sajid, Khalid Akhtar, Samiur Rehman Shah, Experimental investigation of energy harvesting in the wake of a bluff body, Journal of Renewable and Sustainable Energy (JRSE), 12, 033301 (2020)
14.
Ammar Naseem, Zaib Ali, Samiur Rehman Shah, Jawad Aslam, Muhammad Sajid, Ali Abbas Zaidi, Adeel Javed, Yamin Younis, Effect of vortices on power output of vertical axis wind turbine (VAWT), Sustainable Energy Technologies and Assessments, Volume 37, 100586, 27 November 2019
15.
Imran Shah, Emad Uddin, Aamir Mubashar, Muhammad Sajid, Muhammad Yamin Younis, Hudair Samad, Kyung Hyun Choi, Numerical Investigation of Surface Acoustic Wave (SAW) interacting with a droplet for Point-of-Care Devices, International Journal of Acoustics and Vibration, 24(4), pp 632-637, December 2019, https://doi.org/10.20855/ijav.2019.24.41312
16.
A. R. Basharat, K. Iman, Z. Bibi, R. Hussain, H. G. Kabir, A. Shahid, M. Humayun, H. A. Hayat, M. Mustafa, M. Shoaib, Z. Ullah, S. Zarina, S. Ahmed, E. Uddin, S. Hamera, F. Ahmad, S. U. Chaudhary*, "SPECTRUM - A MATLAB Toolbox for Identifying Proteins from Top-down Proteomics Data", Scientific Reports - Nature, Vol. 9, No. 11267, Jun. 2019, https://doi.org/10.1038/s41598-019-47724-1
17.
A. u. Rahman, M. Sajid, S. O. Gillani, E. Uddin and I. Hassan, "Detection and tracking of bubbles in two-phase air water flow for non-convergent sinusoidsal channel," in IET Image Processing, vol. 13, no. 4, pp. 692-697, 28 3 2019.
doi: 10.1049/iet-ipr.2018.5684
18.
Muhammad Y. Younis, Hua Zhang, Bo Hu, Emad Uddin and Jawad Aslam, The effect of upstream low-drag vortex generators on juncture flows. International Journal of Wind and Structures, Vol. 28, No. 6 (2019) http://dx.doi.org/10.12989/was.2019.28.6.355
19.
A Mubashar, Emad Uddin, S Anwar, N Arif, S Waheed Ul Haq, MAK Chowdhury, Ballistic response of 12.7 mm armour piercing projectile against perforated armour developed from structural steel, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Oct. (2018), doi:10.1177/1464420718808317.
20.
M. Sheharyar, E. Uddin, Z. Ali, Q. Zaheer, A. Mubashar, Simulation of a Standard Store Separation from a Generic Wing, Journal of Applied Fluid Mechanics, Vol. 11, No. 6 (2018)
21.
H. Ejaz, A. Mubashar, I.A. Ashcroft, E. Uddin, M. Khan, Topology optimisation of adhesive joints using non-parametric methods, International Journal of Adhesion and Adhesives, 81, pp 1-10 (2018)
22.
U. Latif, C. Abdullah, E. Uddin, M.Y. Younis, M. Sajid, S.R. Shah, A. Mubashar, Experimental and numerical investigation of the energy harvesting flexible flag in the wake of a bluff body. International Journal of Wind and Structures, Vol. 26, No. 5, pp 279-292 (2018)
23.
S. Zaki, E. Uddin, B. Rashid, A. Mubashar, Samiur Rehman Shah, Effect of Liner Material and Explosive Type on Penetration Effectiveness of Shaped Charge, Part L: Journal of Materials: Design and Applications, Vol 233, Issue 7, 2019. https://doi.org/10.1177/1464420717753233
24.
A. Azam, A. Mubashar, I.A. Ashcroft, E. Uddin, S.H.I. Jaffery, A numerical study of the effect of ply-layup on the strength and stiffness of a composite T-joint under three point bending, Journal of Adhesion Science and Technology, (2017) 1-15.
25.
M.W. Ali, A. Mubashar, E. Uddin, S.W.U. Haq, M. Khan, An experimental and numerical investigation of the ballistic response of multi-level armour against armour piercing projectiles, International Journal of Impact Engineering. 110 (2017) 47-56.
26.
E.Uddin, W.-X. Huang and H.J.Sung, "Actively Flapping Tandem Flexible Flags in a Viscous Flow", Journal of Fluid Mechanics, Vol.780, pp.120-142, 2015
27.
E. Uddin, W.-X.Huang and H.J.Sung, "Interaction Modes of Multiple Flexible Flags in a Uniform Flow", Journal of Fluid Mechanics, Vol.729, pp.563-583, 2013.
28.
E.Uddin and H.J.Sung, "Simulation of Flow-Flexible Body Interactions with Large Deformation", International Journal for Numerical Methods in Fluids, Vol.21, Issue 9. pp.1089–1102, 2011.
INTERNATIONAL CONFERENCE PAPERS
1.
Gohar Shoukat, Farhan Ellahi, Muhammad Sajid* and Emad Uddin, Computational Study of Zigzag Spacer Design with Elliptical Cross-Section Filaments, MATEC Web Conf., Volume 307, 2020, International Conference on Materials & Energy (ICOME’17 and ICOME’18), Article Number, 01047, DOI: https://doi.org/10.1051/matecconf/202030701047, Published online: 10 February 2020
2.
Abuzar Jamil , Emad Uddin , Ali Abbas Zaidi , Zaib Ali , Jawad Aslam , Syed Omer Gilani, Numerical Simulation of Inline Arrangement of Spheroid Particles in Different Orientations, ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, July 28–August 1, 2019, San Francisco, California, USA https://doi.org/10.1115/AJKFluids2019-4623 (Scopus Indexed)
3.
Ahmad Hammad, Emad Uddin, Zaib Ali, Syed Atif Iqrar and Muhammad Yamin Younis, Effect of corner modification on flow characteristics of a 3D square
Cylinder, The 2019 World Congress on Advances in Structural Engineering and Mechanics (ASEM19) Jeju Island, Korea, September 17 - 21, 2019
4.
Ammar Naseem, Zaib Ali, Emad Uddin, On power augmentation of VAWT in the wake of a bluff body, Proceedings of the 6th International Conference of Fluid Flow, Heat and Mass Transfer (FFHMT'19), Ottawa, Canada – June 18-19, 2019. (Scopus Indexed)
5.
Bushra Zaheer, Emad Uddin, Aamir Mubashar, Zaib Ali, Nabeel Arif, Metal erosion due to particles at high velocity and temperature, Proceedings of the 6th International Conference of Fluid Flow, Heat and Mass Transfer (FFHMT'19), Ottawa, Canada – June 18-19, 2019. (Scopus Indexed)
6.
Muhammad Y. Younis, Hua Zhang, Bo Hu, Emad Uddin and Jawad Aslam, Horseshoe vortex control using low-drag vortex generators, The 2018 World Congress on Advances in Civil, Environmental, & Materials Research (ACEM18)
Songdo Convensia, Incheon, Korea, August 27 - 31, 2018
7.
M Farooq, E Uddin, A Mubashar, SR Shah,Turbulent Cold Flow Analysis of Spark Ignition Engine, 3rd Thermal and Fluids Engineering Conference (TFEC), March 4–7, 2018, Fort Lauderdale, FL, USA (Scopus Indexed)
8.
G Shoukat, M Sajid, E Uddin, Z Ali, Numerical Analysis of Alternating Strand Diameter in Spiral Wound Membrane to Maximize Permeate Flux, ASME 2018 5th Joint US-European Fluids Engineering Summer Conference, FEDSM2018, July 15-20, 2018, Montreal, Quebec, Canada (Scopus Indexed)
9.
Talha Atta, Zaib Ali, Syed Mudassir Ali, Emad Uddin, Hydrodynamic Design and Performance Analysis of Underwater Vehicles Using CFD, 13th International Symposium on Numerical Analysis of Fluid Flows, Heat and Mass Transfer – ICNAAM, 2018, September 13–18, 2018, Rhodes, Greece AIP Conference Proceedings 2116, 030009 (2019); https://doi.org/10.1063/1.5113993 (Scopus Indexed)
10.
Emad Uddin, Usman Iqbal, Nabeel Arif, Samiur Rehman Shah, Analysis of Metal Transfer in Gas Metal Arc Welding, 13th International Symposium on Numerical Analysis of Fluid Flows, Heat and Mass Transfer – ICNAAM, 2018, September 13–18, 2018, Rhodes, Greece (Scopus Indexed)
11.
C. Abdullah, E. Uddin, A. Mubashar, M. Sajid, S.R. Shah, M.Y. Younis, “Experimental and numerical investigation of the energy harvesting flexible flag in the wake of a bluff body”, 2017 World Congress on Advances in Structural Engineering and Mechanics (ASEM17), Seoul, South Korea. 2017
12.
E. Uddin, M.A. Naseem, S.U. Khalid, A. Mubashar, S.R. Shah, “Investigation of the flow around uncambered airfoils at 1000 Reynolds number using computational fluid dynamics for micro air vehicles”, 2017 World Congress on Advances in Structural Engineering and Mechanics (ASEM17), Seoul, South Korea. 2017
13.
E. Uddin, H. J. Sung, "Numerical simulation of energy harvesting eel in a viscous flow using immersed boundary method", Fluids Engineering Division Summer Meeting (FEDSM), Washington DC, USA. 2016 (Scopus Indexed)
14.
E. Uddin and Hyung Jin Sung, “Numerical simulation of fish schooling in a viscous flow”, Vol. 1, pp 70-75, Korean computational fluid engineering conference, Seoul, Korea, October 31-November 1, 2013.
15.
E.Uddin, W.-X. Huang and H.J.Sung, "Interaction Modes of Fish Schooling in a Viscous Flow", Vol. 1, pp 567-571, 14th Asian Congress of Fluid Mechanics, Hanoi, Vietnam, October 15-19, 2013.
16.
E. Uddin and Hyung Jin Sung, “Simulation of fish schooling in a viscous flow”, Vol. 1, pp ko27, 4th Asian Joint Workshop on Thermophysics and Fluid Science, Busan, Korea, October 14-17, 2012.
17.
E. Uddin and Hyung Jin Sung, “Interaction of in-phase and out-of-phase flexible filament in fish schooling”, Vol. 56-18, pp H28, 64th Annual Meeting of the APS Division of Fluid Dynamics, Maryland, USA, November 20–22, 2011.
18.
E. Uddin, A. M. Malik, I. A. Malik, I. Javed “Heat transfer simulation of flow over blunted cone”, 7th International Conference of Numerical Analysis and Applied Mathematics, Crete, Greece, September 18-22, 2009.
DOMESTIC CONFERENCE PAPERS
1.
Design and Capturing of Shock Wave in Ejector by Numerical Simulations
Ali Abbas Zaidi and Emad Uddin, 16th International Bhurban Conference Applied Sciences and Technology (IBCAST), 2019, Islamabad Pakistan
2.
Hydrodynamic Loading For Harbor Protection
Ibrahim Naeem, Emad Ud Din, Muhammad Sajid and Zaib Ali, 16th International Bhurban Conference Applied Sciences and Technology (IBCAST), 2019, Islamabad Pakistan (Scopus Indexed)
3.
Numerical investigation of breathing in a long blunt nosed body at supersonic speed
Naveed Akram ; Emad ud Din ; M. Arshad ; Farhan Abbas ; Ali Abbas Zaidi, 15th International Bhurban Conference Applied Sciences and Technology (IBCAST), 2018, Islamabad Pakistan
4.
Design and development of low-speed water tunnel
M Saeed, E Uddin, A Mubashar, SU Zahir, AA Zaidi, 15th International Bhurban Conference Applied Sciences and Technology (IBCAST), 2018, Islamabad Pakistan
5.
H. Ahmed, A. Mubashar, E. Uddin, M. Khan, S.H. Imran, Numerical Study for the Armor Ceramics Subjected to High Speed Impact, 15th International Bhurban Conference on Applied Sciences and Technology (IBCAST), Islamabad, Pakistan , 2018.
6.
M.R. Naseer, E. Uddin, K. Rana, S. Zahir, Computational validation of hydrodynamic and hydroacoustic performance of marine propeller, 14th International Bhurban Conference on Applied Sciences and Technology (IBCAST), Islamabad, Pakistan, 2017.
7.
Usman Aslam, Ali Ahmed, Ajmal Baig, M. Rafique, Emad Uddin, “CFD Based Design and Optimization of a High Subsonic Flush/Submerged Intake at Different Flight conditions” 13th International Bhurban Conference on Applied Sciences & Technology, Islamabad, Pakistan, 2016.
8.
E. Uddin, I. A. Malik, A. M. Malik, “Modeling and simulation of flow over blunted cone-flare”, Vol. 1, pp 5, 6th International mechanical engineering congress, Karachi, Pakistan, 2009.
9.
E. Uddin, S. A. A. Zaidi, I. Javed, M. H. Sahir, “Design & analysis of ejector for solar refrigeration system”, 6th International bhurban conference on applied sciences & technology, Islamabad, Pakistan, 2009.