International Journal Papers
Submitted
[72] S. Hong, and Jinwoo Lee* et al., " Integrated Experimental and Numerical Investigation of Fracture Onset in Automotive Components Using Finite Element Analysis", under revision
2025
[71] H. J. Bong, and Jinwoo Lee et al., "Multi-scale Modeling of Ultra-Thin Commercially Pure Titanium Sheet for Fuel Cell Bipolar Plates: Plastic Anisotropy and Distortional Strain Hardening", Int J Min Met Mater, Accepted
[70] H. J. Bong, W. Jeong, K. M. Min, C. Kim, Jinwoo Lee*, M.-G. Lee**, "Crystal plasticity model for predicting ductile fracture in cast Al alloy", Int J Mech Sci, *Corresponding author, 304, 110697 (2025)
[69] H. J. Bong, Jinwoo Lee*, M.-G. Lee, "Finite element modeling of springback behavior for aluminum 6000 series sheets using three point bending tests", Int J Auto Tech, *Corresponding author, 26, 1285–1294 (2025)
[68] J. Choi, Jinwoo Lee*, H. J. Bong, M.-G. Lee, J. Ha, F. Barlat**, "Bulge bottoming process for reducing springback in U-bending of 980 MPa high-strength steel", Int J Mater Form, *Corresponding author, 18(23), (2025)
[67] S. Choi, S.-C. Kang, Jinwoo Lee*, M.-G. Lee**, "Novel distortional anisotropic hardening model mediated by microstructure evolutions in polycrystalline metals: theory and validation", Int J Plasticity, *Corresponding author,185, 104227 (2025)
2024
[66] B. Jeon, S.-Y. Lee, Jinwoo Lee, Y. Jeong*, "Direct application of elasto-visco-plastic self-consistent crystal plasticity model to U-draw bending and springback of dual-phase high strength steel", Int J Plasticity, 181, 104098 (2024)
[65] K. Lee, J. Park, Jinwoo Lee*, S. W. Kwon, I. Choi, and M.-G. Lee#, "Computational framework for predicting friction law under mixed boundary lubrication, and its application to sheet metal forming process", Tribology International, *Corresponding author, 199, 109941 (2024)
[64] H. J. Bong*, J. Y. Sung, Jinwoo Lee, M. H. Kim, and K. S. Lee, "Correlating mechanical properties of Al/Al bimetal composite and its constituents using combined experiment and microstructure-based multiscale modeling approach", J. Mater. Res. Technol., 31, 2037-2051 (2024)
[63] Jinwoo Lee, H. R. Lee, and M.-G. Lee*, "Characterization and modelling of anisotropic hardening behaviour of cubic and hexagonal close packed polycrystalline metals", Philosophical Magazine Letters, 104(1), 235271 (2024)
2023
[62] Jinwoo Lee*, H. J. Bong, C. Kim, D. Kim, and M.-G. Lee**, "Investigation on a novel in-line incremental die forming process for sheet metals", Thin-Walled Structures, *Corresponding author,193 (Dec), 111281 (2023)
[61] C. Kim, H. J. Bong**, K. S. Lee, M.-G. Lee, and Jinwoo Lee*, "Simulation-free identification of the reduced Hosford-Coulomb ductile fracture criterion for the Nimonic sheets assisted by the virtual fields method", JOM - J Min Met Mat Society, *Corresponding author, 75, 5494-5504 (2023)
[60] Jinwoo Lee, H. J. Bong*, J. Ha, and D. Kim**, "Inter-void shearing effect on damage evolution under plane strain deformation in high-strength aluminum alloy sheet", J. Mater. Res. Technol., 26, 7547-7565 (2023)
[59] K. Lee, J. Park, Jinwoo Lee*, S.W. Kwon, I. Choi, and M.-G. Lee**, "Enhancement of the boundary friction model for the sheet metal forming process", Int J Mech Sci, 260, 108652 (2023), *Corresponding author
[58] Jinwoo Lee, H. J. Bong,** D. Kim, and J. Ha*, "Modeling the multiaxial fracture behavior of Ti-6Al-4V alloy sheets at a high temperature using improved damage modeling", J. Mater. Res. Technol. ,25, 1844-1859 (2023)
[57] Y. Choi, Jinwoo Lee, H. J. Bong, M.-G. Lee*, “Hole expansion characteristics of W-tempered 7075 aluminum alloy sheet in comparison with peak aged T6 tempered alloy sheet”, Met Mater Int, 29, 157–167 (2023)
2022
[56] Jinwoo Lee*, H. J. Bong, J. Ha, "Efficient and robust stress integration algorithm for anisotropic distortional hardening law under cross-loading with latent hardening", Eur J Mech A Solids, 96, 104775 (2022), *Corresponding author
[55] C. Moon, J. Y. Won, K. Lee, Jinwoo Lee, S.-W. Kim, M.-G. Lee*, "Mechanical behavior and interfacial damage of carbon steel-stainless steel corrosion resisted-alloy (CRA) cladded plate: hybrid analysis based on experiment and finite element modeling", Mat. Sci. & Eng. A, 852, 143697 (2022)
[54] Jinwoo Lee*, H. J. Bong, H. Park, D. Kim, "Micromechanics-based modeling of plastic and ductile fracture of aluminum alloy 2024-O", Eng Fract Mech, 261, 108213 (2022), *Corresponding author
[53] H. J. Bong, Jinwoo Lee, and M.-G. Lee, "Modeling crystal plasticity with an enhanced twinning–detwinning model to simulate cyclic behavior of AZ31B magnesium alloy at various temperatures", Int J Plasticity, 150, 103190 (2022)
2021
[52] Jinwoo Lee*, H. J. Bong and M.-G. Lee**, "Return Mapping with a Line Search Method for Integrating Stress of the Distortional Hardening Law with Differential Softening", Comput Struct, 257, 106652 (2021), *Corresponding author
[51] H. J. Bong, D. Kim, Y.-N. Kwon, Jinwoo Lee*, "Predicting hot deformation behaviors under multiaxial loading using the Gurson-Tvergaard-Needleman damage model for Ti-6Al-4V alloy sheets", Eur J Mech A Solids, 87, 104227 (2021), *Corresponding author
[50] Y. Kim, T. Kim, Jinwoo Lee, Y. S. Choi, J. Moon, S. Y. Park, T. H. Lee, H. K. Park, S.A Lee, M. S. Kwon, H.-G. Byun, J.-H. Lee, M.-G. Lee*, B. H. Hong*, and H. W. Jang*, "Tailored Graphene Micropatterns by Wafer-Scale Direct Transfer for Flexible Chemical Sensor Platform", Adv Mater, 33 (2), 202004827 (2021)
[49] C. Moon, S. Thuillier, Jinwoo Lee, M.-G. Lee*, “Mechanical properties of solution heat treated Al-Zn-Mg-Cu (7075) alloy under different cooling conditions: analysis with full field measurement and finite element modeling”, J Alloys Compd, 856, 158180 (2021)
[48] H. J. Bong, Jinwoo Lee*, “Crystal Plasticity Finite Element–Marciniak-Kuczynski Approach with Surface Roughening Effect in Predicting Formability of Ultra-Thin Ferritic Stainless Steel Sheets”, Int J Mech Sci, 191, 106066 (2021), *Corresponding author
2020
[47] H. J. Bong, D. H. Yoo, D. Kim, Y.-N. Kwon, Jinwoo Lee*, “Correlative Study on Plastic Response and Formability of Ti-6Al-4V Sheets under Hot Forming Conditions”, J Manuf Process, 58, 775-786 (2020), *Corresponding author
[46] Jinwoo Lee, H.J. Bong, D. Kim, M.-G. Lee*, "Modeling Differential Permanent Softening under Strain-Path Changes in Sheet Metals using a Modified Distortional Hardening Model", Int J Plasticity, 133, 102789 (2020)
[45] H.J. Bong, Jinwoo Lee, M.-G. Lee*, "Study on Plastic Response under Biaxial Tension and Their Correlation with Formability for Wrought Magnesium Alloys", JOM - J Min Met Mat Society, 72(7), 2568–2577 (2020)
[44] Jinwoo Lee, H.J. Bong, D. Kim, Y.-S. Lee, Y.M. Choi, M.-G. Lee*, "Mechanical properties and formability of heat-treated 7000-series high-strength aluminum alloy: Experiments and finite element modeling", Met Mater Int, 26, 682–694 (2020)
[43] H. Park, Jinwoo Lee, Y.S. Lee, J. H. Kim, D. Kim*, "Characteristic evaluation of electromagnetic forming system and its application to deformation prediction in bulge forming", Int. J. Adv. Manuf. Technol., 107, 775–789 (2020)
[42] H.J.Bong*, Jinwoo Lee, X. Hu, X. Sun, M.-G. Lee*, "Predicting forming limit diagrams for Magnesium alloys using crystal plasticity finite elements", Int J Plasticity, 126, 102630 (2020)
[41] Jinwoo Lee, H.J. Bong, S.-J. Kim, D. Kim*,, M.-G. Lee*, “An enhanced distortional-hardening-based constitutive model for hexagonal close-packed metals: Application to AZ31B magnesium alloy sheets at elevated temperatures”, Int J Plasticity, 126, 102618 (2020)
[40] H. Park, S.-J. Kim, Jinwoo Lee, J. H. Kim, D. Kim*, "Delamination behavior analysis of steel/polymer/steel high-strength laminated sheets in a V-die bending test", Int. J. Mech. Sci., 173, 105430 (2020)
[39] Y. Choi#, Jinwoo Lee#, S. S. Panicker, H.-K. Jin, S. K. Panda, M.-G. Lee*, “Mechanical properties, springback, and formability of W-temper and peak aged 7075 aluminum alloy sheets: Experiments and modeling”, Int. J. Mech. Sci.,170, 105344 (2020), #Equal contribution
2019
[38] Jinwoo Lee, H.J. Bong, D. Kim, Y.-S. Lee, Y. Choi, M.-G. Lee*, "Application of combined W-temper and cold forming technology to high strength aluminum alloy automotive parts", JOM - J Min Met Mat Society, 71(12), 4393–4404 (2019)
[37] H. Park, Jinwoo Lee, S.-J. Kim, Y.-S. Lee, D. Kim*, “Warm forming behavior of magnesium alloy sheet in manufacturing of window regulator rail”, Int J of Auto Tech, 20(S), 67-78 (2019)
[36] Y. Lee, S. Jung, H. Baek, Jinwoo Lee, M.-S. Choi, M.-G. Lee*, "Effect of anisotropic plasticity on the prediction of formability of E-form magnesium alloy sheet", Int J Auto Tech, 20(6), 1183-1193 (2019)
[35] H. Park, S.-J. Kim, Jinwoo Lee, J.H. Kim, D. Kim, "Characterization of the Mechanical Properties of a High-Strength Laminated Vibration Damping Steel Sheet and Their Application to Formability Prediction", Met Mater Int, 25(5), 1326-1340 (2019)
[34] H. Park, Jinwoo Lee, Y.-S. Lee, J. H. Kim, D. Kim*, "Electromagnetic expansion joining between tubular and flat sheet component", J. Mater Process Tech., 273, 116246 (2019)
[33] Jinwoo Lee, H.J. Bong, Y.-S. Lee, D. Kim**, M.-G. Lee*, "Pulsed electric current V-bending springback of AZ31B magnesium alloy sheets", Metall Mater Trans A, 50(6), 2720-2731 (2019)
[32] H.J. Bong, Jinwoo Lee, D. Kim, M.-G. Lee*, "Identification of mechanical responses of steel sheets under non-proportional loadings using dislocation-density based crystal plasticity model", Int. J. Mech. Sci., 155, 461-474 (2019)
2018
[31] J. Choi, Jinwoo Lee#, M.-G. Lee, F. Barlat*, “Advanced constitutive modeling of advanced high strength steel sheets for springback prediction after double stage U-draw bending”, Int J Solids Struct, 151, 152-164 (2018), #Co-corresponding author
[30] Jinwoo Lee, H.J. Bong, J. Ha, J. Choi, F. Barlat, M.-G. Lee*, "Influence of yield stress determination for anisotropic hardening model on springback prediction in dual-phase steel", JOM - J Min Met Mat Society , 70(8), 1560-1566 (2018)
[29] Jinwoo Lee, H. Park, S.-J. Kim, Y.-N. Kwon, D. Kim*, "Numerical investigation into plastic deformation and failure in aluminum alloy sheet rubber-diaphragm forming", Int. J. Mech. Sci. , 142-143, 112-120 (2018)
[28] S.-J. Kim, C. Lee, J. Koo, Jinwoo Lee, Y.-S. Lee, D. Kim*, "Improving the room-temperature formability of a magnesium alloy sheet by texture control", Mat. Sci. & Eng. A, 724, 156-163 (2018)
[27] Jinwoo Lee, S.-J. Kim, H. Park, H. J. Bong, and D. Kim*, “Metal plasticity and ductile fracture modeling for cast aluminum alloy parts”, J. Mater Process Tech., 255, 584-595(2018)
[26] H.J. Bong, D. Leem, Jinwoo Lee, J. Ha, and M.-G. Lee*, “A coupled crystal plasticity and anisotropic yield function model to identify the anisotropic plastic properties and friction behavior of an AA 3003 alloy”, Metall Mater Trans A, 49(1), 292-294(2018)
2017
[25] Jinwoo Lee, S.-J. Kim, Y.-S. Lee, J.-Y. Lee, D. Kim*, and M.-G., "Distortional hardening concept for modeling anisotropic/asymmetric plastic behavior of AZ31B magnesium alloy sheets", Int J Plasticity, 94, 74-97 (2017)
[24] J. Ha, Jinwoo Lee, J.H. Kim, M.-G. Lee, F. Barlat*, “Investigation of plastic strain rate under strain path changes in dual-phase steel using microstructure-based modeling”, Int J Plasticity, 93, 89-111 (2017)
[23] H. J. Bong, Jinwoo Lee, J.-H. Kim, F. Barlat*, M.-G. Lee*, “Two-stage forming approach for manufacturing ferritic stainless steel bipolar plates in PEM fuel cell: Experiments and numerical simulations”, Int J Hydrogen Energ, 42(10), 6965-6977 (2017)
2016
[22] S.-J. Kim, S.-D. Kim, D. Yoo, Jinwoo Lee, Y. Rhyim, D. Kim*, "Evaluation of the athermal effect of electric pulsing on the recovery behaviour of magnesium alloys ", Metall Mater Trans A, 47(12), 6368-6373 (2016)
[21] D.Y. Li, Z. Chen, L. Sun, Jinwoo Lee, R.H. Wagoner*, “An Improved Test for Shear Fracture”, Int J Solids Struct, 97-98, 29-42 (2016)
[20] Jinwoo Lee, J. Ha, H. J. Bong, D. Kim#, M.-G. Lee#, "Evolutionary anisotropy and flow stress in advanced high strength steels under loading path changes", Mat. Sci. & Eng. A, 672, 65-77 (2016)
[19] H. Park, D. Kim*, Jinwoo Lee, S.-J. Kim, Y. Lee, Y.H. Moon, "Effect of an aluminum driver sheet on the electromagnetic forming of DP780 steel sheet", accepted in J. Mater Process Tech, 235, 158-170 (2016)
[18] J. Choi, Jinwoo Lee, G. H. Bae, M.-G. Lee, F. Barlat*, "Evaluation of Springback for DP980 S Rail using Anisotropic Hardening Models", JOM - J Min Met Mat Society, 68 (7), 1850-1857
[17] Jinwoo Lee, S.-J. Kim, M.-G. Lee, J. H. Song, S. Choi, H.N. Han, D. Kim*, "Experimental and numerical study on the deformation mechanism in AZ31B Mg Alloy sheets under pulsed electric-assisted tensile and compressive tests", Metall Mater Trans A, 47(6), 2783-2794 (2016)
[16] S. Kim, Jinwoo Lee, F. Barlat#, M.-G. Lee*, "Transformation kinetics and density models of quenching and partitioning (Q&P) steels", Acta. Mater, 109, 394-404 (2016)
[15] H.J. Bong, F. Barlat, Jinwoo Lee, M.-G. Lee*, C.H. Kim, "Application of Central Composite Design for Optimization of Two-Stage Forming Process Using Ultra-thin Ferritic Stainless Steel", Met Mater Int, 22(2), 276-287 (2016)
[14] Z. Chen, U. Gandhi, Jinwoo Lee, R.H. Wagoner*, "Variation and Consistency of Young's Modulus in Steel", J. Mater Process Tech.,227, 227-243 (2016)
2015
[13] C. Zhou, Z. Chen, J.W. Lee, M.G. Lee, R.H. Wagoner*, “Implementation and application of a temperature-dependent Chaboche model”, Int. J. Plasticity, 75, 121-140 (2015)
[12] J. Lee, J.H. Kim, M.G. Lee*, F. Barlat, C. Zhou, Z. Chen, R.H. Wagoner, “Properties Controlling Bend-Assisted Fracture of AHSS”, Int. J. Plasticity, 75, 100-120 (2015)
[11] H. Kim, J. Lee, F. Barlat, D. Kim, M.-G. Lee*, "Experiment and modeling to investigate the effect of stress state, strain and temperature on martensitic phase transformation in TRIP-assisted steel", Acta Mat., 97, 435-444 (2015)
[10] J.S. Choi, J.W. Lee, J.-H. Kim, F. Barlat, M.G. Lee*, D. Kim, "Measurement and modeling of simple shear deformation under load reversal: Application to advanced high strength steels", Int. J. Mech. Sci., 98, 144-156 (2015)
[9] J. Lee, D. Kim, Y.-S. Lee, H.J. Bong, F. Barlat, M.-G. Lee, "Stress Update Algorithm for Enhanced Homogeneous Anisotropic Hardening Model", Comp. Method. Appl. Mech. Eng., 286, 63-86 (2015)
2014
[8] D. Kim*, H.I. Park, J. Lee, J.H. Kim, M.-G. Lee, Y.S. Lee, "Experimental study on forming behavior of high-strength steel sheets under electromagnetic pressure", J. Engineering Manufacture
[7] JJ Ha, JW Lee, JH Kim, F.Barlat, MG Lee*, “Meso-scopic analysis of strain path change effect on the hardening behavior of dual-phase steels”, Steel Research Int., 85(6), 1047-1057 (2014)
2013
[6] MG Lee*, JW Lee, F.Barlat, J.Gracio, G.Vincze, E.Rauch, “A dislocation-based hardening model incorporated into an anisotropic hardening approach”, Comp Mater Sci, 79, 570-583 (2013)
[5] SN Kim, JW Lee, F.Barlat, MG Lee*, "Formability prediction of advanced high strength steels using constitutive models characterized by uniaxial and biaxial experiments”,J. Mater Process Tech, 213, 1929-1942 (2013)
[4] JW Lee, JY Lee, F.Barlat, MG Lee*, R.H.Wagoner,K.Chung, “Extension of Quasi-Plastic-Elastic Approach to Incorporate Complex Plastic Flow Behavior-Application to Springback of Advanced High Strength Steels”, Int. J. Plasticity, 45, 140-159 (2013)
2012
[3] JW Lee, F.Barlat, JH Kim, MG Lee*, "Stress integration schemes for novel homogeneous anisotropic hardening model", Comp. Method. Appl. Mech. Eng, 247-248, 73-92 (2012)
[2] JY Lee, JW Lee, F.Barlat, MG Lee*, "An application of homogeneous anisotropic hardening to springback prediction in pre-strained U-draw/bending", Int. J. Solids Struct., 49, 3562-3572 (2012)
[1] JW Lee, MG Lee*, F. Barlat, “Finite element modeling using homogeneous anisotropic hardening and application to spring-back prediction”, Int. J. Plasticity, 28, 13-41 (2012)