Changwoo Kang, Innocent Mutabazi and Antoine Meyer, “Thermomagnetic convection of a ferrofluid inside a Taylor-Couette system,” KSME Annual Meeting 2025, December 10-13, 2025, Jeongseon, Korea.

Ina Jeong, Jeonghun Ko, Youngmin Park and Changwoo Kang, “Numerical study on shrinking of W/O/W emulsion droplets,” KSME Annual Meeting 2025, December 10-13, 2025, Jeongseon, Korea.

Subin Kim, Ina Jeong, Jonghwan Moon, Dongha Park and Changwoo Kang, “Development a numerical model for lithium-ion battery performance analysis,” KSME Annual Meeting 2025, December 10-13, 2025, Jeongseon, Korea.

Jisu Park, Junhee Kim and Changwoo Kang, “Numerical investigation of geometric and operational parameter interactions in porous plates for transpiration cooling,” KSFM Winter Meeting 2025, December 3-6, 2025, Jeju, Korea.

Taehyeon Kim, Jisu Park, Seungmin Na and Changwoo Kang, “Film cooling performance and flow characteristics with surface roughness,” KSFM Winter Meeting 2025, December 3-6, 2025, Jeju, Korea.

Bahoe Jeong, Jeong-Yeol Kim and Changwoo Kang, “Analysis of cooling performance of Z-type air-cooled battery packs with varying slope of manifold,” KSFM Winter Meeting 2025, December 3-6, 2025, Jeju, Korea.

Ina Jeong and Changwoo Kang, “Electrochemical and thermal performance analysis of 18650 LiFePO₄ batteries with respect to N/P Ratio and active material fraction,” 2025 Fall Meeting of the Korean Electrochemical Society, November 19-21, 2025, Busan, Korea.

Subin Kim, Ina Jeong, Jonghwan Moon, Dongha Park and Changwoo Kang, “Development a numerical model for lithium-ion battery performance analysis,” 2025 Fall Meeting of the Korean Electrochemical Society, November 19-21, 2025, Busan, Korea.

Jisu Park, Jeonghun Ko, Taehyeon Kim, Youngmin Park, Bahoe Jeong, Jun-hee Kim and Changwoo Kang, “Numerical study of transpiration cooling for flat plates,” KSME Thermal Engineering Division Spring Meeting 2025, April 23-26, 2025, Jeju, Korea.

Jeonghun Ko, Junhee Kim and Changwoo Kang, “Effect of manifold inclination on cooling performance of U-type air-cooled battery pack,”  KSCFE Spring Conference 2025, April 10-11, 2025, Iksan, Korea.

Changwoo Kang, Abdessamad Talioua, Arnaud Prigent and Innocent Mutabazi, “Transition of turbulent flow in counter-rotating cylindrical annulus” KSCFE Spring Conference 2025, April 10-11, 2025, Iksan, Korea.

Changwoo Kang, Abdessamad Talioua, Arnaud Prigent and Innocent Mutabazi, “Transition to turbulent Taylor vortices in counter-rotating cylindrical annulus,” KSME Fluid Engineering Division 2025 Spring Conference, April 2-4, 2025, Seoul, Korea.

Changwoo Kang, “Thermo-electro-hydrodynamic convection in a finite cylindrical annulus,” KSME Fluid Engineering Division 2025 Spring Conference, April 2-4, 2025, Seoul, Korea.

Ina Jeong, Subin Kim and Changwoo Kang, “Numerical study of thermal runaway for 18650 LiFePO4 battery under high C-rate charge,” 2025 Spring Meeting of the Korean Electrochemical Society, April 2-4, 2025, Jeju, Korea.

Jisu Park, Taeksu Jeong and Changwoo Kang, “CFD analysis for predicting aerodynamic noise in F/L washing machines,” KSME Annual Meeting 2024, November 6-9, 2024, Jeju, Korea.

Changwoo Kang, Innocent Mutabazi and Harunori N. Yoshikawa, “Thermo-electro-hydrodynamic convection in a finite cylindrical annulus under microgravity,” 13NCFE, July 24-26, 2024, Daejeon, Korea.

Ina Jeong, Changwoo Kang, Subin Kim and Seongpil An, “A numerical study on thermal runaway and temperature behavior of 18650 LiFePO4 battery,” KSFM Summer Meeting 2024, July 3-5, 2024, Pyeongchang, Korea.

Jeong Hun Ko, Junhee Kim and Changwoo Kang, “The effect of varying slope of manifold on the cooling performance for U-type air cooled battery pack,”  KSFM Summer Meeting 2024, July 3-5, 2024, Pyeongchang, Korea.

Jisu Park, Junhee Kim and Changwoo Kang, “Astudy of film cooling performance according to length-diameter ratio of the holw with inlet groove,”  KSFM Summer Meeting 2024, July 3-5, 2024, Pyeongchang, Korea.

Changwoo Kang, Innocent Mutabazi and Harunori N. Yoshikawa, “Thermo-electro-hydrodynamic (TEHD) convection in a finite cylindrical annulus under microgravity,” KMS Conference in 2024, May 22-24, 2024, Seoul, Korea.

Ina Jeong, Changwoo Kang and Seongpil An, “Numerical study of thermal runaway for 18650 LiFePO4 battery under high C-rate charge/discharge operations,” KSME Thermal Engineering Division Spring Meeting 2024, April 24-27, 2024, Jeju, Korea.

Jeonghun Ko, Jisu Park, Jun-hee Kim and Changwoo Kang, “A study on the cooling performance of U-type air-cooled battery pack with varying slope of manifold,” KSME Thermal Engineering Division Spring Meeting 2024, April 24-27, 2024, Jeju, Korea.

Jisu Park, Junhee Kim and Changwoo Kang, “Effects of length of laidback fan-shaped hole with an inlet groove on film cooling performance,” KSFM Winter Meeting 2023, November 29 - December 1, 2023, Jeju, Korea.

Junhee Kim and Changwoo Kang, “Effects of cross-sectional shape of a inlet groove on film cooling performance,” KSFM Winter Meeting 2023, November 29 - December 1, 2023, Jeju, Korea.

Ina Jeong, Jeong Hun Ko, Changwoo Kang and Seongpil An, “Analysis of the thermal behavior of a cylindrical 18650 LiFePO4 battery during charge and discharge cycle,” KSME Annual Meeting 2023, November 1-4, 2023, Incheon, Korea.

Changwoo Kang, Harunori N. Yoshikawa, Arnaud Prigent and Innocent Mutabazi, “Solitary-like and modulated wavepackets in the Couette-Taylor flow with a radial temperature gradient,” KSME Annual Meeting 2023, November 1-4, 2023, Incheon, Korea.

Changwoo Kang, Harunori N. Yoshikawa and Innocent Mutabazi, “Thermo-electro-hydrodynamic convection in a finite cylindrical annulus under microgravity,” KSME Annual Meeting 2023, November 1-4, 2023, Incheon, Korea.

Jisu Park, Junhee Kim and Changwoo Kang, “Analysis of the film cooling performance of varying the hole length-to-diameter ratio on the laidback fan-shaped hole with an inlet groove,” KSCFE Fall Meeting 2023, October 12-13, 2023, Gyeongju, Korea.

Changwoo Kang, Michael F. Schatz and Parisa Mirbod, “Hysteresis and ribbons in Taylor-Couette flow of a semidilute non-colloidal suspension,” KSCFE Fall Meeting 2023, October 12-13, 2023, Gyeongju, Korea.

Changwoo Kang and Innocent Mutabazi, “Thermal convection phenomena in a dielectric liquid under a microgravity condition,” KSFM Summer Meeting 2023, July 5-7, 2023, Pyeongchang, Korea.

Changwoo Kang, Innocent Mutabazi and Harunori N. Yoshikawa, “Transitions in a dielectric liquid under microgravity,” KMS Conference in 2023, May 25-26, 2023, Muju, Korea.

Changwoo Kang, “Transitions in Taylor-Couette flow of non-colloidal suspensions,” KSME Fluid Engineering Division 2023 Spring Conference, May 17-19, 2023, Seoul, Korea.

Changwoo Kang, “Rayleigh-Benard convection in non-colloidal suspensions,” KSME Fluid Engineering Division 2023 Spring Conference, May 17-19, 2023, Seoul, Korea.

Changwoo Kang and Parisa Mirbod, “Numerical study on Taylor-Couette flow of non-colloidal suspensions,” Spring Meeting of the Korean Society of Rheology, April 28, 2023, Seoul, Korea.

Jisu Park, Junhee Kim, Ina Jeong and Changwoo Kang, “Performance analysis with length to diameter ratio of the film cooling hole with inlet groove,”KSME Thermal Engineering Division Spring Meeting 2023, April 19-22, 2023, Busan, Korea.

Junhee Kim and Changwoo Kang, “Effects of edge angles of a inlet groove on film cooling performance,” KSFM Winter Meeting 2022, November 30 - December 2, 2022, Jeju, Korea.

Jisu Park, Junhee Kim and Changwoo Kang, “The effects of hole length and metering length on the performance of film cooling hole with a inlet groove,” KSFM Winter Meeting 2022, November 30 - December 2, 2022, Jeju, Korea.

Dogeon Lee, Ina Jeong and Changwoo Kang, “Laminar flow past a porous-coated circular cylinder,” KSFM Winter Meeting 2022, November 30 - December 2, 2022, Jeju, Korea.

Changwoo Kang, Innocent Mutabazi and Harunori N. Yoshikawa, “Flow patterns in a dielectric liquid contained in a cylindrical annulus under a microgravity condition,” KMS Conference in 2022, May 26-27, 2022, Cheongju, Korea.

Changwoo Kang, Innocent Mutabazi, Junhee Kim and Jisu Park “Thermoelectric convection in a cylindrical annulus,” KSME Thermal Engineering Division Spring Meeting 2022, April 20-22, 2022, Gyeongju, Korea.

Junhee Kim, Changwoo Kang and Seungro Lee, “Performance analysis of a film-cooling hole with inlet groove,” KSFM Winter Meeting 2021, December 1-3, 2021, Jeju, Korea.

Changwoo Kang and Innocent Mutabazi, “Numerical simulation of thermoelectric convection in a dielectric liquid confined in a cylindrical annulus,” KSFM Winter Meeting 2021, December 1-3, 2021, Jeju, Korea.

Changwoo Kang and Innocent Mutabazi, “Introduction to numerical study of thermoelectric convection under a microgravity condition,” KMS Annual Meeting 2021, November 12-13, 2021, Cheongju, Korea.

Changwoo Kang, Innocent Mutabazi and Harunori N. Yoshikawa, “Flow instability in a dielectric liquid inside a cylindrical annulus with a solid-body rotation,” KSCFE Fall Meeting 2021, November 11-12, 2021, Siheung, Korea.

Changwoo Kang and Parisa Mirbod, “Transitions in Taylor-Couette flow of non-colloidal suspensions,” KSME Annual Meeting 2021, November 3-5, 2021, Gwangju, Korea.

Changwoo Kang, “Large eddy simulation of turbulent heat transfer in ribbed-pipe and curved-pipe flows,” KSME Fluid Engineering Division 2021 Spring Conference (Online), August 18-19, 2021, Korea.

Changwoo Kang and Innocent Mutabazi, “Flow and heat transfer induced by dielectrophoretic force in a dielectric liquid contained a cylindrical annulus,” KSME Fall Annual Meeting (Online), December 16 – 24, 2020, Korea.

Changwoo Kang and Parisa Mirbod, “Shear-induced Particle Migration in flows of Brownian suspensions,” KSFM Winter Meeting, November 25 – 27, 2020, Yeosu, Korea.

Changwoo Kang, “Introduction to numerical simulation of two-phase flow,” ASCoF 2018 Spring Annual Meeting, April 29 – May 1, 2018, Parigny, France.

Changwoo Kang and Innocent Mutabazi, “Thermal Convection in a Cylindrical Annulus under a Thermo-Electric Body Force,” ASCoF 2017 Fall Annual Meeting, November 5-6, 2017, Rueil-Malmaison, France.

Changwoo Kang, “Large Eddy Simulation in Turbulent Pipe Flow,” ASCoF 2017 Spring Annual Meeting, May 6-8, 2017, Dordogne, France.

Changwoo Kang and Innocent Mutabazi, “NUMERICAL STUDY OF THERMAL CONVECTION IN A ROTATING ANNULUS WITH A CENTRIFUGAL BUOYANCY,” ASCoF 2016 Fall Annual Meeting, October 29-30, 2016, Paris, France.

Changwoo Kang, “Large Eddy Simulation of Turbulent Heat Transfer in Ribbed Pipe Flow,” School ISTROF 2016, July 11-13, 2016, Le Havre, France.

Changwoo Kang, Kyung-Soo Yang, Jaehee Kim and Doohyun Park, “Numerical Simulation of Flow and Heat Transfer in Ribbed Pipe Flow,” KSME 2014 Fall Annual Meeting, November 11-14, 2014, Gwangju, Korea.

Changwoo Kang, Kyung-Soo Yang, Jaehee Kim and Doohyun Park, “Flow and Heat Transfer Characteristics in Turbulent Curved Pipe Flow,” KSME Fluid Engineering Division 2014 Spring Conference, May 15-16, 2014, Busan, Korea.

Changwoo Kang, Kyung-Soo Yang, Jaehee Kim and Doohyun Park, “DIRECT NUMERICAL SIMULATION OF TURBULENT HEAT TRANSFER IN CURVED PIPE FLOW,” KSCFE 2013 Fall Annual Meeting, October 31 – November 1, 2013, Seoul, Korea.

Taekyeong Jeong, Kyung-Soo Yang, Kyongjun Lee, Changwoo Kang, Jaehee Kim and Doohyun Park, “CONTORL OF CHANNEL-FLOW TOPOLOGY BY A STREAMWISE-PERIODIC ARRAY OF ROTATING CIRCULAR CYLINDERS,” KSCFE 2013 Fall Annual Meeting, October 31 – November 1, 2013, Seoul, Korea.

Taekyeong Jeong, Kyung-Soo Yang, Kyongjun Lee and Changwoo Kang, “Heat Transfer Enhancement in Channel Flow by a Streamwise-Periodic Array of Circular Cylinders,” KSME Thermal Engineering Division 2013 Spring Conference, May 22-24, 2013, Busan, Korea.

Changwoo Kang and Kyung-Soo Yang, “Effects of Schmidt Number on Turbulent Mass Transfer in Pipe Flow,” KSME 2012 Fall Annual Meeting, November 7-9, 2012, Changwon, Korea.

Changwoo Kang and Kyung-Soo Yang, “Large Eddy Simulation of Turbulent Mass Transfer in Ribbed Pipe Flow,” KSME 2012 Fall Annual Meeting, November 7-9, 2012, Changwon, Korea.

Changwoo Kang and Kyung-Soo Yang, “THE EFFECTS OF WALL BOUNDARY CONDITIONS ON MASS TRANSFER IN TURBULENT PIPE FLOW,” KSCFE 2012 Spring Annual Meeting, May 24-25, 2012, Jeju, Korea.

Changwoo Kang and Kyung-Soo Yang, “Reynolds Number Effects on Turbulent Pipe Flow,” KSME 2011 Fall Annual Meeting, November 2-4, 2011, Daegu, Korea.

Changwoo Kang and Kyung-Soo Yang, “Reynolds Number Effects on Mass Transfer in Turbulent Pipe Flow,” KSME 2011 Fall Annual Meeting, November 2-4, 2011, Daegu, Korea.

Changwoo Kang and Kyung-Soo Yang, “Large Eddy Simulation of turbulent Mass Transfer in Circular Pipe Flow,” KSME Fluid Engineering Division 2011 Spring Conference, April 15-16, 2011, Pohang, Korea.

Changwoo Kang and Kyung-Soo Yang, “Heat Transfer Characteristics of Baffled Channel Flow,” KSME Fluid Engineering Division 2011 Spring Conference, April 15-16, 2011, Pohang, Korea.

Dong-Hyeog Yoon, Kyung-Soo Yang, Changwoo Kang and Klaus Bremhorst, “TURBULENT MASS TRANSFER AROUND A ROTATING CIRCULAR CYLINDER – EFFECTS OF SCHMIDT NUMBER -,” The 6th National Congress on Fluids Engineering, August 18-20, 2010, Busan, Korea.

Changwoo Kang and Kyung-Soo Yang, “FLOW INSTABILITY IN A BAFFLED CHANNEL FLOW,” The 6th National Congress on Fluids Engineering, August 18-20, 2010, Busan, Korea.

Dong-Hyeog Yoon, Kyung-Soo Yang and Changwoo Kang, “CHANNEL FLOW WITH A STREAMWISE-PERIODIC ARRAY OF CIRCULAR CYLINDERS – PRIMARY INSTABILITY AND FLOW CHARACTERISTICS -,” KSCFE 2010 Spring Annual Meeting, May 13-14, 2010, Jeju, Korea. 

Changwoo Kang and Kyung-Soo Yang, “Taylor-Couette Flow with Parametric Excitation of the Cylinders,” KSME 2009 Fall Annual Meeting, November 4-6, 2009, Yongpyong, Korea.

Changwoo Kang, Kyung-Soo Yang and Dong-Hyeog Yoon, “The Effect of Radial Temperature Gradient on the Taylor-Couette Flow,” KSME Fluid Engineering Division 2009 Spring Conference, May 21-22, 2009, Busan, Korea.