Tuners and Grommets

There are 3 small pre-drilled holes that are on the bottom of neck which is there the strings will go through. With the 6 grommets, place them into the holes. It may be necessary to hammer in the grommets if the hole is too small or use glue to keep them in place if the holes are big.

If a hammer is used, it would be wise to use cloth or something as a buffer between the hammer and the grommet to prevent marring and damage.

The other end of the neck has three larger holes and on the back side there are 6 small predrilled holes. Use a 1/16" drill bit to enlarge the holes so you can use a screwdriver to hand screw the screws.