Chuwi Hi8 Pro Firmware Download =LINK=

Buenos dias, adquir una HiPad Plus con Android 10 y me gustara actualizarla a Android 11. No me puedo creer que subieran el firmware durante un tiempo y ahora lo hayan retirado. Muy contento con el dispositivo pero muy decepcionado con el respaldo de Chuwi, gracias.

Hello, I inform you that after I contacted the Chuwi service ( service@chuwi.com ) they sent me the link to obtain the European Android 11 version of firmware for Hipad Plus Android 11 (zip. file size of about 1.2 GB)

Chuwi Hi8 Pro Firmware Download

Download File 🔥 https://tiurll.com/2y2N5e 🔥

Does Any1 got chuwi to send update verion of their BIOS? I have corebook x i5 8259u with 16Gb ram and my BIOS version is 2.20.1271 but i saw YouTuber with version 2.20.1275. I believe it can solve my battery issue under Linux.

All the following Chuwi Stock ROM (zip file) contains the original Chuwi USB Driver, Flash Tool, and the Firmware File. After Downloading the firmware, follow the instruction manual shipped with the firmware to flash or install firmware on mobile.

While in general third-party firmware (Custom ROM) has system bugs and stability issues. In this case, you may experience battery issues, network issues, camera issues, missing features, lags, overheating, slow performance, and many more. But whenever you switch to Stock ROM, you can quickly fix them all.

[*] After flashing (installing) the Chuwi Stock ROM on your device, you may need to flash (install) the IMEI using the IMEI tool provided with the firmware file. If you are going to flash the IMEI, then flash the Original IMEI that comes with your device.

[*] Request Firmware: If you are looking for any specific firmware that is not listed above, you can request it through the comment box below (do not request firmware through the contact page, or else it will be ignored).

@LUIS VAZQUEZ

Did you buy it second hand? I though the new model would not support SSD: -software.com/2017/10/22/chuwi-lapbook-14-1-laptop-manufacturing-changes-hardware-at-launch-vs-several-months-later/

On a side note:

To activate the firmware the module will have to be loaded.

Meaning "sudo modprobe silead" to test if it works, after which (if successful) it can be added to /etc/modules for the next boot.

I did a clean install of 3.8.30 and had a crack at compiling the silead module from GitHub - sigboe/gslX68X: Kernel space driver for Silead touch screen digitizers.

It compiled ok and installs. lsmod shows it installed, but no mention of loading the firmware and the touch does not work.

The module is about 20k in size, compared to 25k for the ubuntu module, so I'm guessing the source comes from somewhere else.

I see that the bios is only for the 630 version, if you have 4100, please do not install it. It is better to first reset the bios settings and if problems persist you can contact aftersale@chuwi.com to get a bios for your version.

I recently switched from Manjaro to Ubuntu 18.10

A few things:

a) for touchscreen:

You must follow these steps:

1. Install the driver:

Clone the repository from -acpi

make

insmod ./gslx680_ts_acpi.ko

Then you need the correct firmware (you must select the correct Chuwi Hi 10 Pro model (based on the beginning of the serial number), rename silead_ts.fw to mssl1680.fw:

-firmware/tree/master/firmware/chuwi

Then you must calibrate the screen. A script, which you can run with startup applications is at -on-hi10/blob/master/touchscreen/rotation

You may need to change "DSI1" to "DSI-1"

2. Audio: Ubuntu 18.10 already has it setup mostly so all you need to do is:

copy the code from: and save it as speakerEnable.c

Then: make

This program must run as root when you login therefore, you must turn it into a service to run on startup (unless you manually want to do ./speakerEnable every time you want the speakers) -can-i-run-a-program-as-a-root-user-when-my-ubuntu-15-04-machine-starts-up

I hope the instructions are clear. If you need clarification on how to make (compile a c program) or anything else, please ask. It took a while to get the tablet configured nicely.

On top of the ram/nvme compatibility issues and the overheating problems, the AMD core bios in this has a bug in it where the firmware tpm module may take forever when windows accesses it. That was just fixed a couple of months ago.

How the keyboard works is determined by the keyboard controller (KBC), a part of the embedded controller (EC). You have version CH-EC-V1.1.4 of the EC firmware. Seems there is a newer version CH-EC-V1.1.7 around, along with a matching BIOS version JXX-14-WU133SR200-V1.1.7. There exists also another version CH-EC-V1.8.0, which might be an even more recent update. Or it might be for a different hardware (depending on the serial #). Not sure.

[Chi for VX8 3G Win8 firmware release] Members Chi Friends, Win8 firmware upload is complete, the current version of the firmware that is relatively stable, if Chi Friends find what Bug, please timely feedback to the small Chi oh. PS: Brush risk, you need to be cautious! Download link: Brush Bios http: //t.cn/RhZYjU0 Win8 mirror

1. Unrar the update.img firmware archive, they are .rar and will need to be extracted then you must download and install the Rockchip USB drivers on your PC, these are in the Drivers folder in the RKBatchTool archive, make sure you install the correct version for your operating system and the corresponding 32 or 64 bit version specific to your operating system, this is important.

6. Now press the button at the bottom of the Rockchip Batch Tool marked Switch this will enable firmware flashing mode. The Chuwi V88 will now have a black screen, however the Connected Devices indicator box will change from pink to green.

The firmware files were extracted from Android and Windows devicedrivers, as published by device manufacturers. They are intendedfor people who prefer to replace the shipped operatingsystem with a generic Linux distribution such as Debian or Ubuntu.

The "Tested" field should only be "Yes" if you have confirmed thatthe converted firmware works with silead_ts.ko or gslx680_ts_acpi.koand the touchscreen responds properly, i.e. the device parametersare good.

The Android driver may well contain multiple firmwares to supportdifferent hardware configurations with the same driver. The extractorwill spit those out as seperate files. We currently have no way ofknowing which is right for your device. You will have to try each.Sometimes, the file names will give a clue, like panel size, productname, resolution or chip name. Test the matching ones first.

If you have a Windows driver instead, the firmware either comes inthe form of a file named GSL_TS_CFG.h (or similar) or SileadTouch.fw.The latter is just a scrambled version of GSL_TS_CFG.h and can be easilyrestored by XORing every byte with 0x88.

When Silead touchscreen support was added to ACPI (PC) platforms, theintegrator did not anticipate any uses cases outside the device vendor'secosystems. For this reason, it is required to pass additionaldevice parameters to the driver that are neither contained in the firmwarenor in the ACPI DSDT. silead_ts handles this in the kernel, using anACPI override/quirk table, while gslx680_ts_acpi expects firmware in adifferent format that contains this information.

Since silead_ts requires a kernel modification (and thus a reboot or kexec)whenever parameters are changed, testing is easier with gslx680_ts_acpi.There, parameters can be changed in the firmware, then updated by unloading andreloading the kernel module.

First, decide on a unique name for the firmware. The recommended format is:gsl--.fwIf you don't know the chip name, use gsl1680. Manufacturer and device nameshould be shortened to make the name readable, but still sufficiently unique.

This will read legacy firmware.fw, convert it into silead_ts.fw inthe new format, then set the controller type to GSL1680, the panelwidth to 940 dots, the height to 750 dots and the maximum numberof touch points to 10. The README for each firmware should giveyou information on the information to put there.

If your touchscreen controller does not support finger tracking(this is crucial for proper mouse emulation) or axes seem to bemirrored or swapped, you can modify the firmware toenable corresponding features in the driver. ff782bc1db