Steam Shower

This is the control panel for the steam shower. To use the steam:

1. Press the On/Off button once to turn on the system. The light just above the button will turn on.

2. Decide if you want to have the steam produced for a certain amount of time, or for it to only produce steam when below a certain temperature.

3. If you choose the time option

   1. press the "TIMER" button to input the amount of time you want steam

   2. Press the UP (^)/DOWN (V) buttons to adjust the duration of steam

4. If you choose the temperature option

   1. Press the "TEMP" button

   2. Press the UP (^)/DOWN (V) buttons to adjust the temperature below which steam will be produced

5. After about 15 seconds, steam will be produced according to the settings you have given

6. There should be a small spray bottle in the shower you can use to spray into the steam to enhance the experience

7. When you are done using the steam, you must press the ON/OFF button again to turn off the system (the light above the button should turn off)

8. When the steam shower is OFF, the display will show the current time