Ph.D. Dissertations
徐同學(1994/9-1997/5), 單元製造系統設計—多目標製造單元形成演算法之發展 (Multi-Objective Manufacturing Cell Formation in Cellular Manufacturing System Design)
陳同學(1995/9-1997/10), 應用啟發式最佳化演算法決定CNC車床之加工參數 (Determining Machining Parameters on CNC Lathes Using Heuristic Optimization Algorithms)
廖同學(1995/9-1997/12), 考慮通貨膨脹之退化性存貨系統在需求變動下之訂購政策 (A Study of Inventory Policies for Deteriorating Items under Inflation)
傅同學(1995/9-1998/6), 應用隨機演算法於動態式機器人裝配之研究 (The Stochastic Heuristics in Resolving the Dynamic Robotic Assembly Problem)
張同學(1995/9-1999/6), 不完美多重行動下多狀態系統最佳維護政策之研究 (Optimal Maintenance Policies for a Multistate System Subject to Imperfect Maintenance)
張同學(1996/9-1999/11), 運用柔性演算法求解最佳參數設計 (Optimal Parameter Design via Soft Computing)
吳同學(1996/9-2000/11), 電子產品最佳預燒條件、預燒時間與成本之決定—以交換式整流器為例 (A Systematic Approach of the Determination of Optimal Burn-In Condition, Burn-In Time and Cost for Electronic Products—A Case Study of Switch Mode Rectifier)
姜同學(1998/9-2001/12), 整合式智慧型最佳化參數設計之研究 (Optimization of Parameter Design via Integrated Intelligent Approach)
簡同學(1999/9-2002/6), 顧客滿意活動之推行與決策 (The Implementation and Strategy Decisions for Customer Satisfaction)
李同學(1998/9-2002/7), 應用統計和類神經網路模式於監督式分類問題 (Statistical and Neural Models for Supervised Classification)
薛同學(1998/9-2002/7), 整合機器學習方法於決策樹為基智慧型排程系統之研究 (Decision Tree Based Intelligent Scheduling System in Shop Floor Control Systems: A Hybrid Machine Learning Approach)
林同學(2000/9-2003/5), 變動的需求和生產對經濟製造批量之影響 (The Effect of Variable Demand and Production on the EMQ Model)
廖同學(1996/9-2003/6), 光耦合器產品品質之發展 (The Product Quality Development of Fiber Coupler)
李同學(1999/9-2004/4), 中華民國國家品質獎品質管理模式實證性研究 (An Empirical Study of Quality Management Model for the Taiwan National Quality Award)
王同學(1997/9-2004/7), 液晶顯示器良率配對方法之研究 (Effective Approaches for Liquid Crystal Displays Yield Mapping)
施同學(2000/9-2004/7), 供銷系統中退貨保證模式之研究 (The Integrated Return Contracts in Supply Chain)
許同學(2001/9--2004/7), 動態調整EWMA控制器之發展與評估 (Development and Evaluation of Dynamic Tuning Methods for EWMA Controllers)
許同學(2001/9--2004/7), 變數精準粗略集之理論與應用 (Variable Precision Rough Set Theory and Its Application)
王同學(1999/9-2004/7), 馬氏-田口系統之特性探討及其於信用評分之應用 (Analysis of MTS: Application of Credit Scoring)
徐同學(2001/9-2004/12), 半導體後段廠協同生產規劃之研究 (Collaborative Production Planning for Semiconductor Backend Turnkey Service: An Activity-Based Costing Approach)
賈同學(2001/9-2005/3), 時間間隔對迴歸及相關分析之影響 (The Time Interval Effect on Regression and Correlation Analysis)
陳同學(2001/9-2005/7), 以資料探勘法鏈結顧客知識管理於創新性產品開發專案之研究 (Linking Innovative Product Development With Customer Knowledge: A Data Mining Approach)
王同學(1999/9-2005/11), 整合性供應鏈績效評估與最佳化分析 (An Analytical Framework for Supply Chain Performance Evaluation and Optimization)
陳同學(2002/9-2006/3), 粒化計算處理不平衡資料之理論與應用 (Granular Computing for Class Imbalanced Problems: Theory and Applications)
林同學(2003/9-2006/9), 應用TRIZ於服務品質創新之研究：以電子商務產業為例 (A Systematic Approach for Service Quality Innovation by TRIZ with a Case Study on E-Commerce)
楊同學(2002/9-2006/11), 核心函數為基礎的支持向量分類器：理論與應用 (Kernel-Based SVM: Theory and Application)
張同學(2001/9-2007/5), 整合精實與六標準差方法論於服務品質之改善與創新設計 (Integrating Lean and Six Sigma Methodologies for Service Quality Improvement and Innovative Design)
周同學(2004/9-2008/12), 六標準差方法論之發展與應用：以半導體廠為例 (Development and Application of Six Sigma Methodology in Semiconductor Manufacturing Companies)
蕭同學(2005/9-2009/3), 馬氏-田口系統：理論及其應用 (Mahananobis-Taguchi System: Theory and Applications)
馬同學(2000/9-2010/1), 應用計算智能技術於製程最佳化 (Computational Intelligence for Process Optimization)
林同學(2006/9-2010/12), 運用電磁演算法於屬性篩選：理論與應用 (Applying Electromagnetism-like Mechanism Algorithm to Feature Selection: Theory and Application)
葉同學(2006/9-2011/5), 半導體封裝產業銅焊線製程參數最佳化之研究 (Optimization of Parameter Design of Cu Wire Bonding Process in IC Assembly Industry)
陳同學(2006/9-2011/8), 應用粒子最佳化演算法於屬性篩選 (Particle Swarm Optimization Algorithms for Feature Selection)
王同學(2007/9-2011/8), 以啟發試演算法最佳化模糊聚合網路：理論與應用 (Evolving Optimal Fuzzy Aggregation Networks using Metaheuristic Algorithms: Theory and Applications)
陳同學(2006/9-2012/1), 支持向量器的分類和規則萃取：理論與應用 (Classification and Rule Extraction with SVM: Theory and Application)
楊同學(2004/9-2012/6), 擴展型方針管理之發展與應用：以半導體製造公司為例 (An Extended Hoshin Kanri Planning System Development and Application with Case Studies on Semiconductor Manufacturing Company)
林同學(2010/9-2013/7), TFT-LCD新產品開發之供應商品質管理：模式與應用 (Supplier Quality Management in TFT-LCD New Product Development: Model and Application)
蘇同學(2012/9-2019/12), 整合六標準差與TRIZ之持續改善架構：以TFT LCD產業為例 (A Continual Improvement Framework with Integration of Six Sigma and TRIZ for TFT-LCD industry)
李同學(2012/9-2020/7), 應用增強式學習即時排程於產品組合變異環境 (Real-Time Scheduling Using a Reinforcement Learning Approach in a Product Mix Flexibility Environment)
呂同學(2011/9-2021/1), 結合卷積神經網路、條件生成對抗網路與遷移式學習集成網路於薄膜液晶顯示器Mura瑕疵分類 (CNN Joint with Conditional GAN for TFT-LCD Mura Defect Classification Using Transfer Learning Ensemble)
M.S. Theses
陸同學(1994/9-1997/3), 電子零件可靠度預估方法之比較—以局用電子數位交換機之零組件可靠度預估為例 (Comparative Study on Reliability Prediction Procedures for Electronic Equipment)
陳同學(1995/9-1997/6), 高可靠度產品壽命預估—以發光二極體為例 (A Novel Approach for the Life Forecasting of a Highly Reliable Product)
許同學(1995/9-1997/6), 感性工學執行程序之構建 (A Concise Procedure for Executing Kansei Engineering)
苗同學(1996/9-1998/6), 應用類神經網路於實驗計劃中受限資料分析之研究 (Censored Data Analysis of Experimental Design by Neural Network Approach)
梁同學(1996/9-1998/6), 晶圓製造廠產品組合與機器利用率模式之構建 (The Design of Product Mix and Equipment Utilization Model for Wafer Fabrication Factories)
馮同學(1996/9-1998/6), 晶圓製造廠產品組合、機器利用率與系統平均在製品存貨水準模式之構建—考慮隨機性模式 (Construction of Product Mix, Equipment Utilization and WIP Models for Semiconductor Fabrication Factories)
鄭同學(1997/9-1999/1), 應用類神經網路於實驗計劃中遺失資料分析之研究 (A Neural Network Approach for Experimental Analysis with Missing Data)
許同學(1997/9-1999/6), 晶圓製造廠有系統佈置流程之構建 (Systematic Layout Procedure for Semiconductor Fabrication Facilities)
洪同學(1998/9-2000/1), 台灣地區通訊工業推行品質管理之實證研究 (The Empirical Study of Implementing Quality Management in Communication Industry in Taiwan)
徐同學(1998/9-2000/6), 操作路徑失效分析—以衛星任務為例 (Operation Path Failure Analysis—A Case Study of Satellite Mission)
李同學(1998/9-2000/6), 智慧型問題診斷系統之構建—以園區通訊廠商品質系統為例 (Intelligent Approach for Diagnosis System: A Case Study)
鄭同學(1998/9-2000/6), 品質管理實務與全面品質管理之實證研究—以台灣地區電腦及其周邊產業為例 (Quality Management Practice and Total Quality Management in the Computer and its Peripheral Industry in Taiwan)
楊同學(1998/9-2000/6), 台灣地區半導體產業推行品質管理之實證研究 (The Empirical Study of Implementing Quality Management in Semiconductor Industry in Taiwan)
陳同學(1998/9-2000/7), 類神經網路在醫學檢驗的應用—以肝病為例 (Application of Neural Network for the Diagnosis of Liver Diseases)
柯同學(1999/9-2001/1), 應用監督式類神經網路於晶粒表面缺陷辨識之研究 (Using Supervised Artificial Neural Networks for Die Defect Detection)
許同學(1999/9-2001/1), 類神經網路之知識挖掘 (Knowledge Mining From Trained Artificial Neural Networks)
許同學(1999/9-2001/6), SPC與EPC之整合研究：利用類神經網路構建製程干擾模式 (Integrate SPC and EPC: Using Neural Network To Construct Disturbance Model)
蔡同學(1999/9-2001/7), 應用模糊整合類神經網路於疾病診斷之研究--以肝病為例 (Application of Fuzzy Aggregation Network for the Diagnosis of Liver Diseases)
姜同學(1999/9-2001/7), 類神經網路與統計方法在分類問題的應用研究 (Application of Artificial Neural Networks and Statistical Methods in Classification)
鄒同學(2000/9-2002/6), 應用類神經網路與共通式演算法於參數設計最佳化--以積體電路焊線製程為例 (Applying Neural Network and Meta Algorithm for Optimization of Parameter Design-A Case study)
周同學(2000/9-2002/6), 應用類神經網路於統計機率分配辨識之研究 (Using Neural Network for Statistic Probability Distribution Recognition)
柳同學(2001/9-2003/5), SPC在半導體機台微粒數的運用 (SPC for Machine Particle Counts in the Semiconductor Manufacturing)
楊同學(2002/9-2004/6), 應用改良型巨集式啟發式方法於TFT-LCD良率控制最佳化之研究 (Two-Phased Meta-Heuristic Methods for the Post-Mapping Yield Control Problem)
黃同學(2002/9-2004/6), 應用六標準差突破策略改善製造策略規劃流程 (Six Sigma Breakthrough Strategy for the Improvement of the Manufacturing Strategy Formulation Process: A Case Study)
蕭同學(2003/9-2005/6), 應用MTS於非平衡資料分析之穩健性研究--以行動電話檢測流程為例 (An Evaluation of the Robustness of MTS for Imbalanced Data -- A Case Study of Mobile Phone Test Process)
彭同學(2003/9-2005/6), 應用限制型利基伯拉圖基因演算法於製程參數最佳化 (Constraint Based Niched Pareto Genetic Algorithm and Its Application in Process Parameter Optimization)
賴同學(2005/9-2007/3), 六標準差專案選取架構之發展與案例分析 (A Six Sigma Project Selection Framework and Its Case Study)
李同學(2005/9-2007/3), 六標準差DMAIC流程改善模式之軟體發展 (Development of Six Sigma DMAIC Process Improvement Software)
吳同學(2005/9-2007/5), 應用精實六標準差改善流程週期效率 (An Application of Lean Six Sigma for Improving the Process Cycle Efficiency: A Case Study)
陳同學(2005/9-2007/5), 應用類神經網路於TFT-LCD微影製程缺陷辨識之研究 (A Neural-Network Approach for Defect Recognition in TFT-LCD Photolithography Process)
張同學(2006/9-2008/6), 我國平面顯示器設備產業生產績效之探討 (An Empirical Study on the Performance of Flat Panel Display Equipment Industry in Taiwan)
林同學(2006/9-2008/6), 改良非排序特徵選取過濾法於TFT-LCD Array製程檢測之應用 (An Improved Non-ranker Filter Feature Selection Method for TFT-LCD Array Process Inspection)
方同學(2006/9-2008/6), 整合HFMEA與VSM於醫療流程之改善 (Integrating HFMEA and VSM for Healthcare Process Improvement)
曾同學(2007/9-2009/6), 應用醫療照護之失效模式與效應分析於醫療流程之改善 (Applying HFMEA to Healthcare Process Improvement)
周同學(2007/9-2009/6), 應用精實六標準差改善物流配送績效 (An Application of Lean Six Sigma for Improving the Material Distribution Performance: A Case Study)
曲同學(2007/9-2009/6), 運用決策數與倒傳遞類神經網路建構台股之整合性投資策略 (Using Decision Tree and Back-Propagation Neural Network Building the Integrated Investment Strategy in Taiwan Stock Market)
林同學(2007/9-2009/6), 應用馬氏田口系統於醫療診斷—以術中壓瘡為例 (Applying MTS to Healthcare Diagnosis—A Case Study on Pressure Ulcer)
張同學(2007/9-2009/6), 結合反應曲面法、類神經網路與基因演算法於觸控面板雷射切割製程參數最佳化 (Combining Response Surface Method, Neural Networks and Genetic Algorithms for Optimizing the Parameter Design of Touch Panel Laser Cutting Process)
吳同學(2008/9-2010/6), 結合粒子群最佳化演算法與馬氏田口系統以解決不平衡資料之分類問題 (Combine Particle Swarm Optimization and Mahalanobis-Taguchi System for Solving Classification Problem in Imbalance Data)
楊同學(2008/9-2010/6), 應用精實六標準差改善急性心肌梗塞病患之血管再灌注時間 (An Application of Lean Six Sigma for Improving the Door-to-Balloon Time in Acute Myocardial Infarction: A Case Study)
羅同學(2008/9-2010/6), 應用資料探勘於用藥選擇—以顯影劑為例 (Applying Data Mining to Drug Choice—A Case Study on Contrast Mecium)
龔同學(2008/9-2011/1), 中華民國國家品質獎與公司市場價值之實證研究 (Taiwan National Quality Award and the Market Value of the firm: An Empirical Investigation)
王同學(2009/9-2011/6), 結合田口方法、類神經網路、期望函數與基因演算法於太陽能選擇性吸收膜連續濺鍍製程之參數設計最佳化 (Combining Taguchi Methods, Neural Networks, Desirability Function and Genetic Algorithms for Optimizing the Parameter Design of Solar Energy Selective Absorption Film Continuous Sputtering Process)
陳同學(2010/9-2012/4), 整合HFMEA與六標準差手法於手術檢體採集運送流程之改善 (Integrating HFMEA into Six Sigma Methodology for Improving Surgical Specimens Acquisition Process)
王同學(2010/9-2012/6), 六標準差於工程服務業之應用：個案研究 (An Application of Six Sigma in Engineering Service Industry: A Case Study)
陳同學(2010/9-2012/6), 運用基因演算法發展差異性極大化之集成式分類器 (Using Genetic Algorithm to Optimize the Diversity of Classifier Ensemble)
王同學(2011/9-2013/7), 結合田口方法、類神經網路、期望函數與啟發式演算法於錫膏印刷製程參數設計之最佳化 (Combining Taguchi Methods, Neural Networks Desirability Function and Meta-Heuristic Algorithm for Optimizing the Parameter Design of Solder Paste Printing Process)
蔡同學(2011/9-2013/7), 高科技產業新產品開發階段之品質管制流程設計—以TFT-LCD光罩技術為例 (Quality Control Procedure Design in New Product Development Stage for High-Tech Industry and its Application to TFT-LCD Four-Mask Technology)
林同學(2012/9-2014/6), 應用馬氏田口系統於醫療急救之預測 (Applying MTS to Cardiopulmonary Resuscitation Prediction)
黃同學(2013/9-2015/5), 利用群集分析與信號雜音比分類品質屬性 (Using Clustering Analysis and SN Ratio to Classify Quality Attributes: An Empirical Test)
陳同學(2014/9-2016/5), 應用資料探勘技術於TFT-LCD面板邊框不均勻缺陷之偵測 (Applying Data Mining Techniques for the Detection of TFT-LCD Frame Mura Defects)
陳同學(2014/9-2016/5), 應用六標準差方法於筆記型電腦光碟機之結構強度特性改善 (Enhancing the ODD Anti-Compression Structural Strength of Notebook PC via Six Sigma Approach)
謝同學(2015/2-2016/5), 應用關聯規則於高速公路電子收費系統偵測之研究 (Applying Association Rules to Freeway ETC Detection)
林同學(2014/9-2016/7), 運用基因表達規劃法於支持向量機的規則萃取 (Rule Extraction from Support Vector Machines by Gene Expression Programming)
蓋亞德(2014/9-2016/7), 應用Kano模型、SERVQUAL量表與IPA所建立的服務品質評估架構之實證研究 (A service quality evaluation framework based on Kano model, SERVQUAL, and IPA- An empirical study)
胡同學(2014/9-2017/6), 整合支持向量機、決策樹與粗糙集於院內心跳停止急救事件之預測 (Predicting IHCA Based on Integration of Support Vector Machine, Decision Tree, and Rough Sets)
傅同學(2015/9-2017/6), 結合裝袋算法及減少多數抽樣法於馬氏-田口系統來解決非平衡資料問題 (Integrating Bagging and Under-Sampling with MTS to Alleviate the Class Imbalance Problem)
嚴同學(2015/9-2017/6), 應用六標準差於車床車削製程之改善 (Applying Six Sigma in Turning Process of Lathe: Case Study)
高同學(2015/9-2017/6), 應用品質工程方法於精密鑄造業之砂孔缺陷改善 (Applying Quality Engineering Methods to Reduce Sand Inclusions in Investment Casting Industry)
郭同學(2016/9-2018/6), 運用數值方法分析台灣國家品質獎與企業市場價值之關聯 (The Relationship between Taiwan National Quality Award and the Market Value of the Firm: Application of Analytical Approach)
董同學(2016/9-2018/6), 應用資料探勘技術於鑄造業製程參數最佳化 (Applying Data Mining Techniques for Process Parameter Optimization in Casting Industry)
蔡同學(2016/9-2018/6), 結合馬氏-田口系統與支持向量機於資料分類之研究 (Integrating MTS with SVM for Data Classification)
連同學(2017/9-2019/6), 運用超參數調優技巧建立深度神經網路來處理迴歸問題 (A Hyper-Parameters Tuning Procedure to Construct a Deep Neural Network for Regression Problems)
蔡同學(2017/9-2019/6), 應用機器學習的方法於RFID車輛偵測率的改善 (Using Machine Learning Approaches for Improving the Performance of RFID-based Vehicle Detection Rate)
李同學(2017/9-2019/7), 應用深度神經網路與基因演算法於LED點膠製程參數最佳化 (Apply Deep Neural Network and Genetic Algorithm in LED Industry Dispensing Process Parameter Optimization)
歐陽同學(2017/9-2019/7), 應用機器學習技術於車輛偵測-以ETC數據為例 (Machine Learning Techniques for Vehicle Detection based on ETC data)
莊同學(2017/9-2019/7), 應用計算智能於製程最佳化：案例分析 (Process Optimization by Using Computational Intelligence: Case Studies)
顏同學(2018/9-2020/6), 應應用卷積神經網路-支持向量機和遷移學習於自動缺陷判別 (Utilizing a Convolutional Neural Network-Support Vector Machine with Transfer Learning for Automatic Defect Classification)
黃同學(2018/9-2020/6), 應用卷積神經網路遷移學習與資料擴增方法於產品瑕疵之分類 (Product Detect Classification Using CNN Transfer Learning and Data Augmentation)
王同學(2018/9-2020/6), 運用深度學習與基因演算法於半導體封裝製程參數之最佳化 (Semiconductor Packaging Process Optimization Using Deep Neural Networks and Genetic Algorithm)
邱同學(2018/9-2020/7), ARIMA和深度神經網路的混合模型預測eTag偵測率 (A Hybrid ARIMA and Deep Neural Network Model to Forecast eTag Detection Rate)
許同學(2018/9-2020/7), 應用基於遷移學習之卷積神經網路缺陷分類：比較研究 (Transfer Learning from CNN for Defect Classification: A Comparison Study)
彭同學(2019/9-2021/6), 運用集成深度神經網路於太陽能發電量之預測 (Photovoltaic Generation Prediction based on Ensemble Deep Neural Networks)
林同學(2019/9-2021/6), 應用卷積神經網路遷移學習與深度卷積對抗生成網路於產品瑕疵之分類 (Product Defect Classification using Convolutional Neural Network with Transfer Learning and Deep Convolutional Generative Adversarial Network)
張同學(2019/9-2021/6), 應用類神經網路結合基因演算法於半導體熔噴技術製程最佳化 (Melt-blown Process Optimization Based on Integration of Neural Network and Genetic Algorithm)
程同學(2019/9-2021/6), 運用神經網路與基因演算法於熱塑性聚胺酯產品耐磨耗之改善 (Abrasion Loss Improvement of Thermoplastic Polyurethane Using Neural Network and Genetic Algorithm)
洪同學(2019/9-2021/6), 品質4.0：利用數位化轉型追求卓越 (Quality 4.0: Through Digital Transformation to Pursuit Excellence)
左同學(2020/9-2022/7), 運用卷積神經網路建構性騷擾語音辨識系統 (Sexual Harassment Speech Recognition System using Convolutional Neural Networks)
黃同學(2020/9-2022/7), 多元分析在顧客投訴產品判定之應用的比較研究 (A Comparative Study on the Application of Multivariate Analysis to the Judgment of Customer Complaint Products)
黃同學(2020/9-2022/7), 應用神經網路與啟發式演算法於點膠製程最佳化 (Dispensing Process Optimization using Neural Network and Heuristic Algorithm)
黃同學(2021/9-2023/7), 結合類神經網絡與啟發式演算法於晶圓背面研磨製程之多目標最佳化 (Multi-objective Optimization of Wafer Back Grinding Process using Neural Network and Heuristic Algorithm)
劉同學(2021/9-2023/7), 應用馬氏田口系統與機器學習於肺部結節分類之比較研究 (Applying MTS and Machine Learning for the Classification of Lung Nodules: A Comparative Study)
王同學(2021/9-2023/7), 結合特徵選擇與集成學習模型於預測問題之研究 (Combining Feature Selection and Ensemble Learning Models to Prediction Problems)
鍾同學(2022/2-2023/12), 應用深度學習網路於熱門美食圖片預測 (Applying Deep Learning Networks for Predicting Classification of Popular Food Posts on Social Media)
彭同學(2022/9-2024/6), 運用特徵篩選於醫療分類問題之比較研究 (A Comparative Study of Utilizing Feature Selection in Medical Classification Problems)
薛同學(2022/9-2024/6), 運用深度學習模型結合超參數調優方法於冠狀動脈心臟病之分類研究 (Integration of Deep Learning with Hyperparameter Optimization for the Classification of Coronary Heart Disease)
廖同學(2023/9-2025/5), 運用集成學習模型於脂肪肝疾病之分類研究 (Applying Ensemble Learning Models for Classifying Fatty Liver Disease)
游同學(2023/9-2025/5), 結合注意力機制與深度學習模型於核心體溫預測問題之研究 (Combining Attention Mechanism and Deep Learning for Core Body Temperature Prediction)
吉同學(2023/9-2025/5), 運用物件偵測模型結合殘差神經網路與注意力機制於工業環境中個人防護用具檢測之研究 (Integrating Residual Network and Attention Mechanism with an Object Detection Model for Personal Protective Equipment Detection in Industrial Environments)
M.S. Theses (Professional Master Program)
葉同學(1999/9-2001/6), 方針管理之應用與效益探討--以裕隆汽車公司為例 (Hoshin Management: A Case Study)
彭同學(1999/9-2001/7), 田口方法於馬口鐵蓋切線生銹改善之應用 (The Application of Taguchi Method to Improve the Score Line Corrosion for Full Aperture Tinplate Easy-Open-Ends)
吳同學(1999/9-2001/7), TL 9000之實施與個案研究 (The TL 9000 implementation and case study)
張同學(1999/9-2002/1), 田口方法於半導體封裝製程改善之應用--以焊線站之焊線強度最佳化為例 (Application of Taguchi Methods to Improve the Semiconductor Packaging Process—A Case Study for Wire Strength Optimization of Wire Bonding Process)
邱同學(1999/9-2002/7), 田口方法於矽晶圓廠長晶製程改善之運用 (Improvement of Crystal Pulling Process in Wafer Fabrication by the Taguchi Methods)
李同學(1999/9-2002/7), 田口方法於球閘陣列載板製程改善之應用 (Application of Taguchi Methods to Improve the Ball Grid Array Substrate Process)
喬同學(2001/9-2003/6), 應用六標準差方法提升半導體封裝製程品質 (Improve IC Assembly Process Quality through the Six Sigma Approach)
游同學(2001/9-2003/6), MTS在測試流程改善的應用—以筆記型電腦為例 (Improvement of the Note Book Computer Testing Process Using MTS)
葉同學(2001/9-2003/6), 六標準差行銷--以半導體封測產業為例 (Marketing for Six Sigma--The Case of Semiconductor Package/Test)
徐同學(2001/9-2003/6), 應用田口方法於液晶顯示器應答速度之研究 (Application of Taguchi Methods to Improve the Response Time of LCD)
陳同學(1999/9-2004/4), 應用類神經網路於晶粒表面銲墊變色辨識之研究 (Using Neural Networks for Die Pad Discoloration Detection)
林同學(2002/9-2004/8), 應用田口方法於數位影像掃描器齒輪傳動的異音及影像對位問題之研究 (Apply Taguchi Methods to the Digital Scanner Transmitting Noises and Imaging Position Problems)
余同學(2002/9-2005/10), 六標準差設計應用於ODM電子產品設計品質提升之研究 (DFSS in ODM Electronic Product Development—A Case Study of Wireless Communication Product
胡同學(2001/9-2005/12), 運用田口方法改善無線網路卡功率測試機台誤判之研究 (Application of Taguchi Methods to Reduce Misjudgement of Wireless Network Card Power Test Equipment)
吳同學(2000/9-2007/1), 應用類神經網路於自動櫃員機提款預測之研究 (The Forecasting of Cash Withdrawals from ATM by Using Artificial Neural Network)
孔同學(2001/9-2007/10), 應用類神經網路減少TFT-LCD產品測試項目之研究 (Reducing Test Items of TFT-LCD Product By Using Neural Networks)
林同學(2001/9-2008/7), 應用田口方法改善接觸式三次元測量儀量測品質 (Application of Taguchi Methods to Improve the Performance of Coordinate Measuring Machine)
羅同學(2001/9-2008/7), 應用精實六標準差改善存貨管理績效 (Improve Performance of Inventory Management through Lean Six Sigma)
謝同學(2005/9-2008/12), 應用倒傳遞類神經網路於無線產品效能預估之研究 (Forecasting Transmission Efficiency of WLAN Product by Using Back-Propagation Neural Networks)
葉同學(2005/9-2008/12), 田口方法於製程參數最佳化之應用--以發光二極體產品為例 (Process Optimization by Taguchi Methods: A Case Study of Light Emitting Diode Manufacturing Process)
陳同學(2006/9-2008/12), 應用田口方法達成拋光製程參數最佳化 (Application of Taguchi Methods to Optimize the Parameter of Polishing Process)
黃同學(2005/9-2009/4), 非自然型態之管制圖關鍵影響因素研究—以低溫多晶矽薄膜電晶體液晶顯示器之微影製程為例 (Research on Critical Factors of Unnatural Control Chart Patterns--A Case Study of Lithography Process in LTPS TFT LCD)
林同學(2006/9-2009/7), 利用六標準差手法提升封裝廠之晶片切割良率 (Improve Wafer Sort Yield in Assembly House Through Six Sigma)
劉同學(2007/9-2009/7), 應用六標準差於中小型尺寸TFT LCD面板強度改善 (Applying Six Sigma Methodology to Improve Bending Strength of Small and Medium Sized TFT LCD)
楊同學(2005/9-2009/11), 外包架構之研究—以半導體廠設備預防保養為例 (Outsourcing Management Research: A Case Study of IC Equipment Preventive Maintenance)
張同學(2006/9-2009/11), 運用六標準差方法改善馬達異音問題 (Motor Noise Problem Improvement by Six Sigma Approach)
薛同學(2003/9-2010/6), 田口方法於切削中心加工機製程參數最佳化之應用—以石英玻璃表面加工為例 (Machining Center Process Optimization by Taguchi Methods: A case Study of Quartz Glass Surface Manufacturing Process)
鄧同學(2008/9-2010/6), 六標準差的專案選擇--以PCB產業為例 (Six Sigma Project Selection for PCB industry)
林同學(2009/9-2010/6), 應用田口方法最佳化可撓式顯示器之光學白度特性 (Optimization of the Optical Whiteness Ratio for Flexible Display by Using Taguchi methods)
許同學(2006/9-2011/4), 應用狩野模式分析背光模組之品質要素 (Application of the Kano Model for Analyzing the Quality Attributes of Backlight Unit of TFT-LCD)
張同學(2007/9-2011/4), 用六標準差方法改善焊線式電源連接器斷電問題 (Improving Malfunction of Wired Power Jack Connector Through Six Sigma)
吳同學(2004/9-2011/7), 運用六標準差方法提升發光二極體後段製程良率 (Apply Six Sigma approach to improve the Backend process yield of LED)
林同學(2006/9-2011/12), 應用六標準差DMAIC手法提升連接器撥線製程良率 (Enhancing Yield Rate of Connector Manufacturing Process by Using Six Sigma DMAIC Methodology)
陳同學(2004/9-2011/12), 主題式稽核於ISO 9000品質管理系統之應用--個案研究 (The Application of Themed Surveillance in ISO 9000 Quality Management System--A Case Study)
許同學(2010/9-2012/4), 利用六標準差手法改善印刷電路板之內層開路問題 (Improve PCB Inner Layer Open Circuit Through Six Sigma)
張同學(2005/9-2012/5), 晶圓廠成本系統架構之研究 (The Study on the Cost Systems of Wafer Fabrication Plants)
陳同學(2010/9-2012/5), 新產品開發設計變更流程之發展與應用 (The Development and Application of Design Change Processes in New Product development)
鄧同學(2010/9-2012/5), 結合FMEA與田口方法於電子紙顯示器之可靠度特性改善 (Combining FMEA and Taguchi Methods to Improve the Reliability of electronic Paper Display)
蘇同學(2009/9-2012/7), 應用六標準差設計方法改善液晶電視色偏問題 (LCD-TV Color Shift Improvement by DFSS Approach)
朱同學(2011/9-2014/6), 應運用六標準差手法解決Nand Flash IC半導體脫層問題 (improve Delamination Problem of NanD Flash IC Package by Using Six Sigma Methodology)
薛同學(2012/9-2014/6), TFT-LCD光學膜片裁切製程外包決策分析 (An Analysis on Outsourcing Decision for the TFT-LCD Optical Films Cutting Process)
胡同學(2012/9-2014/7), 產品開發流程之改善—以智慧型手機製造為例 (Improvement of the Product Development Process—A Case of Smartphone Manufacturing)
蔣同學(2012/9-2014/12), 應用六標準差改善IC載板金手指凸起問題 (Using Six Sigma to improve IC carrier finger nodule problem)
簡同學(2012/9-2014/12), 電腦週邊設備業之單件流生產 (One-piece flow manufacturing for computer peripherals industry)
方同學(2011/9-2015/5), 應用六標準差設計DMADV手法改善WiFi產品重測率 (Using Design for Six Sigma DMADV Methodology to Improve Retest Rate of WiFi Product)
黃同學(2011/9-2015/5), 應用六標準差DMAIC方法論改善凸塊製程錫球推力 (Applying Six Sigma DMAIC to improve Ball Shear in Bumping Process)
王同學(2013/9-2015/5), 儲存系統新產品開發階段品質改善流程-個案研究 (A Case Study of New Product Development Process Enhancement for Storage System)
陳同學(2014/9-2015/6), 應用類神經網路決定重要IC測試程式組合之決定 (Application of IC Test Program Setup Using Neural Network)
簡同學(2014/9-2015/12), 提高六標準差認證合格率:個案研究 (Six Sigma Certification Rate Improvement: Case Study)
施同學(2013/9-2016/6), 運用倒傳遞類神經網路預測錫銀凸塊電鍍參數 (Predicting the Sn-Ag solder plating parameters by back propagation neural network)
呂同學(2014/9-2016/6), 應用SERVQUAL與IPA評量客戶稽核服務品質績效-以半導體封測廠為例 (Applying SERVQUAL and IPA to Evaluate Customer Audit Service Quality –A Case Study of Semiconductor Assembly House)
蘇同學(2014/9-2017/7), 運用QC Story改善後段網印品質-以太陽能電池產業N公司為例 (Application of QC Story to Improve the Cell Quality of Printing Process-A Case Study of N Company for the Solar Cell Industry)
黃同學(2015/9-2017/7), 應用精實六標準差方法改善晶圓出貨流程之產出量 (Throughput improvement in Wafer Outgoing flow by Lean Six Sigma)
王同學(2015/9-2017/7), 應用六標準差DMAIC於藍寶石雙拋片之抗壓強度改善：個案研究 (Improvement of the Compressive Strength of Sapphire Double-sided Polishing Wafer Using Six Sigma DMAIC: A Case Study)
賴同學(2015/9-2017/7), 應用8D手法改善IC基板短路問題 (Improvement of Integrated-Circuit Substrate Short Failure Issue using Ford Eight Disciplines Methodology)
洪同學(2015/9-2017/7), 魅力品質之創造：以矽薄膜太陽能產品為例 (Attractive Quality Creation: A Case Study for the Silicon Thin Film Photovoltaic)
王同學(2016/9-2017/9), P型矽多晶太陽能電池製程於電勢誘發衰減現象之改善 (Improvement of Potential Induced Degradation on Cell-Level in P-Type-Poly Si Solar Cell Process)
鍾同學(2015/9-2018/1), 應用六標準差提升TFT-LCD微影製程良率 (Yield Improvement of Photo Engraving Process in TFT-LCD Using Six Sigma Methodology)
劉同學(2016/9-2018/6), 應用多元迴歸與倒傳遞類神經網路預測企業獲利能力之研究 (Forecasting Business Profitability by Using Multiple Regression Analysis and Back-propagation Neural Network)
李同學(2016/9-2018/6), 運用專案管理手法建構MFMEA降低半導體製造廠設備異常發生率 (Implementation of MFMEA in Semiconductor Manufacturing Equipment: A Case Study)
楊同學(2016/9-2018/10), 應用六標準差改善鋰電磁模組熱失控 (The Improvement of Lithium Battery Module Thermal Runaway Using Six Sigma Methodology)
陳同學(2016/9-2018/10), 應用六標準差改善研磨墊溝渠表面粗糙度 (Improving the Surface Roughness of the Polishing Pad Groove Using Six Sigma)
黃同學(2017/9-2019/6), 應用精實六標準差改善動物實驗流程時間：個案研究 (Applying Lean Six Sigma to Improve Animal Experiment Process Cycle Time: A Case Study)
曾同學(2017/9-2019/12), 應用六標準差方法於半導體封裝製程改善:個案研究 (Applying Six Sigma in Semiconductor Packaging Process Improvement: Case Study)
張同學(2018/9-2019/12), 基於卷積神經網路之LED板材瑕疵分類 (Defect Classification of Light-emitting Diode Lead-frame Based on Convolutional Neural Networks)
張同學(2018/9-2019/12), 運用卷積神經網路於軟性印刷電路板瑕疵分類 (Defect Classification of Flexible PCB Based on Deep Convolutional Neural Networks)
蘇同學(2018/9-2020/6), 應用DMAIC程序與田口方法於熱塑性聚胺酯產品耐磨耗之改善 (Abrasion Improvement of Thermoplastic Polyurethane by Using DMAIC Procedure and Taguchi Methods)
邱同學(2018/9-2020/6), 應用田口方法提高SMT微型元件之銲錫性--以0201元件焊接改善為例 (Application of Taguchi Methods for Optimization of SMT Ultra Small Chip’s Solderability—A Case Study of Soldering Improvement for 0201 Chips)
陳同學(2018/9-2020/7), 新產品開發流程之設計與應用—以晶圓級封裝產業為例 (Design and Application of New Product Development Process—A Case Study of the Wafer Level Packaging Industry)
林同學(2018/9-2020/7), 運用類神經網路優化備料決策：個案研究 (A Neural Network Approach to Optimize Material Preparation Decisions: Case Study)
鍾同學(2019/9-2021/6), 應用精實六標準差方法提升品質異常處理流程之績效 (Applying the Lean Six Sigma Method to Improve the Performance of the Quality Deviation Handling Process)
卓同學(2019/9-2021/6), 應用精實六標準差改善半導體公司包裝流程 (Application of Lean Six Sigma in the Packing Process of a Semiconductor Company)
陳同學(2019/9-2021/6), 應用馬氏距離於客訴產品之判定--個案研究 (Applying Mahalanobis Distance in Judgement of Customer Complaint Product--A Case Study in an ICT Company)
徐同學(2019/9-2022/5), 應用田口法改善封裝點膠製程穩定性之研究- 以A封裝廠為例 (A Stability Optimization of Dispensing Process by the Taguchi Methods- A Case Study of Assembly Factory)
蘇同學(2020/9-2022/5), 應用資料探勘技術於半導體事故診斷之研究 (The Study of Applying Data Mining Techniques to the Fault Diagnosis of Semiconductor Manufacturing)
陳同學(2020/9-2022/5), 應用六標準差DMAIC手法改善熱固性樹脂裝飾板外觀缺陷 (Improve Appearance Defect on Thermosetting Resins Decorative Laminate by Using Six Sigma DMAIC Method)
林同學(2020/9-2022/5), 女性肺結節危險因子之分析與探討 (Analysis and Discussion of Risk Factors for Female Pulmonary Nodules)
陳同學(2020/9-2022/12), 探討影響尚未實施Tw-DRGs項目於醫療效率與品質之風險因素 (Exploring risk factors impacting on the efficiency and quality of healthcare in the unimplemented Tw-DRGs program)
林同學(2021/9-2022/12), 應用六標準差方法提升晶圓背面研磨製程能力 (Application of Six Sigma Methodology to Level up Wafer Backside Grinding Process Capability)
劉同學(2021/9-2023/7), 應用精實六標準差改善工廠組裝績效實證研究—以某載板設備製造業為例 (Application of Lean Six Sigma to Improve the Assembly Process Cycle Efficiency– A Case Study of a Machinery Equipment Company)
王同學(2021/9-2023/12), 使用AHP方法決定智慧型穿戴裝置電子票證之導入地區 (Using AHP Method to Determine the Region for Introducing Smart Wearable Device Smart Card)
黃同學(2022/9-2024/6), 應用六標準差設計結合VSM與TRIZ提升客訴流程之服務績效 (Apply Design for Six Sigma combined with VSM and TRIZ to Improve Service Performance of Customer Complaint Process)
游同學(2021/9-2024/6), 應用QC STORY改善隱形眼鏡破片-個案研究 (Applying QC Story to Improve Contact Lens Notch and Tear – A Case Study)
邱同學(2022/9-2024/6), 應用精實六標準差提高訂單作業流程效率--個案研究 (Applying Lean Six Sigma Approach to Improve the Efficiency of Order Fulfillment Process -- Case Study)
劉同學(2022/9-2024/6), 運用QC STORY與CNN提升腦部電腦斷層影像完整上傳率 (Using QC Story and CNN to Improve the Complete Transmission of Brain Computed Tomography Images)
楊同學(2022/9-2025/5), 結合精實六標準差與田口方法優化研發驗證流程—以桌上型電腦為例 (Optimizing the R&D Verification Process by Integrating Lean Six Sigma and Taguchi Methods—A Case Study on Desktop Computers)
卓同學(2021/9-2025/5), 運用六標準差DMAIC流程與田口方法改善金屬沖壓製程效率 (Applying Six Sigma DMAIC Process and Taguchi Methods to Enhance Stamped Process Efficiency)
Student Paper Awards
博士班徐同學, 第11屆龍騰論文獎(佳作獎, 1997)
碩士班梁同學, 87年度全國管理碩士論文獎(優勝, 1998)
碩士班苗同學, 87年度全國管理碩士論文獎(佳作, 1998)
碩士班苗同學, 第12屆龍騰論文獎(佳作, 1998)
碩士班鄒同學, 91年度全國管理碩士論文獎(優勝, 2002)
博士班簡同學, 91年度中小企業博士論文獎(2002)
博士班姜同學, 第16屆龍騰論文獎(金質獎, 2002)
博士班許同學, 第18屆龍騰論文獎(金質獎, 2004)
碩士班彭同學, 第19屆龍騰論文獎(優等獎, 2005)
博士班陳同學, 36th Int. Conf. on C&IE論文獎(Excellent Student Paper Award, 2006)
博士班王同學, 第4屆DHL供應鏈管理論文獎(佳作獎, 2006)
碩士班曲同學, 台灣作業研究學會碩士論文獎(佳作, 2009)
博士班蕭同學, 台灣作業研究學會博士論文獎(優勝, 2009)
碩士班張同學, 臺灣飛利浦品質文教基金會第一屆卓越品質管理碩士論文獎(銀質獎, 2009)
碩士班林同學, 中華民國品質學會卓越品質碩士論文獎(金帶獎, 2009)
博士班蕭同學, 中華民國品質學會卓越品質博士論文獎(金帶獎, 2009)
博士班林同學, 中華民國品質學會卓越品質博士論文獎(銀質獎, 2013)
碩士班王同學, 中華民國品質學會卓越品質碩士論文獎(金質獎, 2013)
碩士班蔡同學, 中華民國品質學會卓越品質碩士論文獎(銀質獎, 2013)
碩士班林同學, 中華民國品質學會卓越品質碩士論文獎(銀質獎, 2014)
碩士班黃同學, 中華民國品質學會卓越品質碩士論文獎(銀質獎, 2015)
碩士班陳同學, 中華六標準差管理學會六標準差論文獎(經管實務組特優, 2016)
碩士班傅同學, 中華民國品質學會卓越品質碩士論文獎(銀質獎, 2017)
碩士專班林同學，中華六標準差管理學會六標準差論文大賞（經管實務組，特優論文獎，2023）