STC-1000 220V All Purpose Digital Temperature Controller Thermostat Module with Temperature Sensor Probe is a temperature measurement and Controller tool with high accuracy and precision at a very low cost. It offers a high-temperature control precision of 0.1℃. The temperature control range from -50℃ to 99℃.

The LED display shows the results clearly. One can directly install or embed the STC-1000 in industrial control equipment panel, convenient and quick. It features a 1M probe made up of stainless steel material which makes it waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent and environmental protective.

Features :

• seamlessly Switch between the temperature modes (between cool and heat).

• Temperature is controlled by setting the temperature value and the difference value.

• manual temperature calibration is available.

• Refrigerating control output delay protection is built-in.

• An alarm outputs a warning sound when the temperature exceeds temperature limit or when the sensor outputs error.

Specifications :

• Model: STC-1000

• Power supply: 220VAC±10%, 50/60Hz

• Temperature measuring range: -50 – 99°C

• Resolution: 0.1°C

• Accuracy: ±1°C (-50 – 70°C)

• Sensor error delay: 1 minute

• Power consumption: ≤3W

• Sensor: NTC sensor

• Relay Output capacity: Cool 10A/250VAC; : Heat 10A/250VAC

• Ambient temperature: 0 – 60°C

• Storage temperature: -30 – 75°C

• Relative humidity: 20% – 85% (No condensate)

• Front panel size: 75(L) x 34.5(W)(mm)

• Mounting size: 71(L) x 29(W)mm

• Sensor length: 1m (include the probe)

• Height (mm): 75

• Length (mm): 34.5

• Width (mm): 85

• Weight (gm): 100

Package includes:

• 1 x 220V Mini Digital Temperature Controller

• 1 x Temperature sensor probe with cable

Digital Temperature Controller XH-W3001

Product description

This delicate digital display temperature controller can set start and stop temperature. The display and control temperature can be set to 0.1℃ with wide temperature control range from -50℃ to 110℃. It is convenient to install and wiring is simple. Widely used in the hatching area, equipment case, air conditioning system, temperature control protection and other fields.

How to use:

Press "UP" button show the starting temperature;

Long press "UP" button until the temperature display flashes, press the "UP" or "Down" button to set the start temperature value;

Press "Down" button show the stop temperature;

Long press "Down" button until the temperature display flashes, press the "UP" or "Down" button to set the stop temperature value.

Wide temperature control range from -50℃ to 110℃.

High temperature control precision of 0.1℃.

LED display shows the results clearly.

1m waterproof probe is equiped for convenient usage.

Widely used in the hatching area, equipment case, air conditioning system, temperature control protection and other fields.

Can be installed directly or embedded in industrial control equipment panel, convenient and quick.

Probe used stainless steel material, waterproof and does not rust easily.

Specification:

• Model: XH-W3001

• power supply voltage: 220V AC 50Hz

• Main material: ABS

• Voltage: 220V

• Output: 10A(max)

• Temperature Measurement Range: -50~110℃

• Temperature Control Range: -50~110℃

• Temperature Control Precision: 0.1℃

• Load Power: 1500W(220V)

• Measuring Input: NTC10K 1m waterproof probe

• Installation Hole Distance: 7.3cm / 2.87in

• Hole Diameter: 4mm / 0.15in

Kit include:

220 V 10A Digital Thermostat Control Switch Temperature Controller LED + Probe