Embedded Files
This style Plate MountBlank is used to mount a plate on a wall. Two bottom tabs soldered to a center stem are shaped by you to your plate's profile and support its weight. There is a top tab soldered to a rod that, after being shaped to the plate's profile, slides into a tube to lock the plate in. (See the illustration below.) The center stem installs into the wall.
The Wall Plate MountBlank comes in three sizes, based on the diameter of the object it will easily accommodate.
Example: Ceramic Plate
Example: Ceramic Plate
Here are each size of wall-style Plate MountBlank, the object to display and the finished mount.
Large / No. 22-263W
Small / No. 22-261W
Medium / No. 22-262W
Here you see a step-by-step of installing your plate into the Wall PlateMount. We've digitized the felt padding on the mount to be day-glo orange to help it show up.
Step 1. The mount has been formed to the plate. An undersized hole has been drilled into the back wall. The PlateMount stem has been pushed through the hole. The top tab is lifted out of the tube (that's the vertical orange).
Step 2. The plate is positioned into the bottom two tabs. The rod attached to the top tab is positioned into the tube.
Step 3. The top tab slides down into place locking the plate in position. Oh, so simple!
Step 4. I can let go now. Boy, those tabs are hard to see when everything is done. Scroll through the carousel to see close-ups of the tabs.
Page updated
Google Sites
Report abuse