John Ngu Chee Hoe, “Modeling aerosol transmission of SARS-CoV-2 in an office with HVAC vents,” Mar 2022-Dec 2022.
Chieng Guang Rong, “Development of wall-cooling technology using layers of nanofluids,” Mar 2022-Dec 2022.
Saefudeen Omar AL-Fatah Bin Mahmud, “Vibration Analysis of HVAC Chiller via Simulation,” Mar 2022-Dec 2022.
Sim Rui Li, “Development of smart HVAC thermostat with AI using visual detector for energy saving,” Sep 2021-Jun 2022.
Amanda Chua Qian Ying, “Study of effectiveness of Nitrogen based Fire Suppression Systems via Numerical Simulation,” Mar 2021-Dec 2021.
Lo Chun Hui, “Study of Thermal Comfort in Stage Performance Theatre via Numerical Simulation of HVAC Cooling,” Mar 2021-Dec 2021.
Lucas Liew Yew Phin, “Monte Carlo simulation of low-energy electron beam propagation in semiconductors,” Mar 2021-Dec 2021.
Ngo Chiung Leong, “Design of light-scattering based sensor for assessing car engine degradation via exhaust gas,” Mar 2021-Dec 2021.
Ryan Rainer Goh Chun Han, “lnvestigation of cooling by nanotextured surface via Monte Carlo phonon transport,” Sep 2020-Jun 2021.
Nicholas Thian Ching Hua, “Modeling Laser-Tissue Interaction for Removal of Cancer Cells,” Sep 2020-Jun 2021.
Talha Asad Iqbal, “CFD simulation of reduced drag of sports car,” Mar 2019-Dec 2020.
Vannethaspriy AP Balakrishnan, “Development of smart HVAC cooling via thermal detection and CFD modeling,” Mar 2019-Dec 2020.
Azib Syahmi bin Azahari, “Numerical simulation of air-humidity interaction in a building,” Mar 2019-Dec 2020.
Jacky Fam, “Performance study of various refrigerants in the HVAC chiller via CFD simulation,” Sep 2019-Jun 2020.
Calvin Soon, “A study of various HVAC duct types and network designs on minimizing AHU energy requirement,” Sep 2019-Jun 2020.
Ahmad Zaky Iswani, “Effect of laser beam widening on spatial degree of polarization in scattering media,” Mar 2019-Dec 2019
Kelvin Lee Hou Kiat, “Power generation from waste heat sources using near-field thermophotovoltaic cells,” Mar 2019-Dec 2019
Jim Lee Zung Huei, “Power generation via black silicon thermophotovoltaic cells,” Mar 2019-Dec 2019
Chee Weng Hong, “E-beam micro-machining of n-doped silicon with assistive joule heating,” Mar 2019-Dec 2019
Liew Shin Yung, “Spatial Effect of Multi Electron-Beam Processing on Target,” Sep 2019-May 2019.
Li Hun Lin, “Development of radiation-shielding composite walls for buildings with low energy consumption,” Sep 2019-May 2019.
Jacky Tan, “Simulation of heat losses in chilled water piping system and its effect on HVAC efficiency and cost,” Sep 2019-May 2019.
David Chung, “Transient CFD simulation of intelligent adaptive vents for maintaining uniform temperature in building,” Sep 2019-May 2019.
Phil Chan Siew Thong, “Numerical investigation of temperature measurement using an electron beam,” Mar 2018-Dec 2018.
Justin Tay Chun Kai, “Solar cell heat mitigation - construction of a layer for selective unwanted wavelength absorption,” Mar 2018-Dec 2018.
Alex Liew Jia Cheng, “Numerical modeling of heat trapping at the nanoscale,” Mar 2018-Dec 2018.
Aaron Ong Shung Khai, “CFD modeling of elastometric pre-insulated air duct system for HVAC applications,” Mar 2018-Dec 2018.
Jasman Chai Yi Hao, “Simulation of light scattering by nanofluid,” Mar 2018-Dec 2018.
Mahmoud Saleh Mahmoud, “A net-zero energy building for Swinburne Sarawak campus,” Mar 2018-Dec 2018.
Sharifah Nurul Syahrina, “Numerical Simulation of Water Hammering Effect in Cold and Hot Water Supply in Buildings,” Sep 2017-May 2018.
Buddhi Siyath Gunatunga, “Detection irregularities in an absorption and scattering liquid solutions using Monte Carlo simulation (Detecting fat concentration),” Sep 2017-May 2018.
Fabian Liew Min Liang, “CFD Modelling of Chilled Water Central Air Conditioning Piping Design,” Sep 2017-May 2018.
Nickly Ng Kok Kheng, “Modelling of Degradation of Chillers in HVAC System and Evaluation of Their Associated Costs for Long-Term Investment,” Sep 2017-May 2018.
Nurzahidah binti Mohamad Rasidi, “Numerical Investigation of Effectiveness of Different Cooling Tower Fan Blade Designs and its Effect on Chiller Efficiency,” Sep 2017-May 2018.
Sim Zhi Sheng, “Numerical Simulation of Heat Transfer from a Micro-Sized Channel to a Nano-Sized Object,” Sep 2017-May 2018.
Wong Hao Wen, “Numerical simulation of state library cooling by the HVAC system and proposal for energy saving,” Sep 2017-May 2018.
Muhammad Zaid Imran, “Parametric study of electrical and thermal responses of materials due to electron-beam heating,” Mar-Dec 2017.
Mohamed Hijaz Hiras Ahamed, “Effect of Controlled Adaptive Vents of Centralized Air Conditioning System on Thermal Comfort in Rooms and Buildings,” Mar-Dec 2017.
Joyce Teo Hua Sze, “Numerical Simulation and Optimization of Thermophotovoltaic Energy Conversion,” Mar-Dec 2017.
Gabriel Quek Min Tze, “An Engineering Solution for Hot Spot Mitigation in a Smartphone,” Mar-Dec 2017.
Vishwanath Anil Nair, “Comparison Between Laser Modification of a Silicon Workpiece Using ArF, Nd:YAG Lasers,” Sep 2016-May 2017.
Salil Hari Kulkarni, “Study and Optimization of Parameters Influencing Uniform Spray of Paint,” Sep 2016-May 2017.
Pubudu Bandara, “Developing a concentrated photovoltaic system for household applications,” Sep 2016-May 2017.
Lance Wong Jhoon Zhan, “Drag Reduction and Downforce Optimization of a Supercar Using CFD Simulation,” Sep 2016-May 2017.
Law Kim Yong, “Modelling of Temperature Distribution of Solar Cell Under Sun Light Illumination,” Sep 2016-May 2017.
Mohamed Haneek Zulfikar, “Design of Low-Drag Compact Car Via CFD Simulation,” Sep 2016-May 2017.
Mark Owen Anak Baring, “Numerical Modelling of Temperature and Humidity Distribution of Air in a Building,” Mar-Dec 2016.
Khalis Afiq Yusoff, “Implementation of Adaptive Air Vents for Existing Building for Minimizing HVAC Energy Consumption,” Mar-Dec 2016.
Adrian Tan Dai Shenq, “Improvement to Building Ventilation Systems via New Design and CFD Simulation,” Mar-Dec 2016.
Ahilan Gunasegran, “Investigation of the Mechanical Properties of Ferrofluid for Applications in Heat Dissipation of Engineering Systems,” Mar-May 2016.
Muhammad Saalim Farooqui, “Numerical Study of Thermal Cooling at the Nanoscale,” Sep 2015-May 2016.
Rishan Ramachandran, “Characterization of Foam using Polarized Light Scattering,” Sep 2015-May 2016.
Stefan Dwayne Anthony Wanasinghe, “Numerical Study of Geometrical Effect on Nanoscale Heat Conduction,” Sep 2015-May 2016.
Jason Anak Edmund Daging, “Investigate and Develop Method to Minimise Forces in Liquids Induced by Waves and Slosh,” Mar 2015-Dec 2015.
Jack Emilius Lim Chan Kai, “Improvements Over Pressure Distribution and Aerodynamics Around an Aircraft via Simulation and Experimental Testing under Wind Tunnel,” Mar 2015-Dec 2015.
Eugene Lim Tech Chia, “Simulation of Aerodynamics Characteristics Around a F1 Racing Car and Potential Improvements,” Mar 2015-Dec 2015.
Gordon Wong Siew EE, “Simulation of “Temperature” Distribution of Thin Film Due to Electron-Beam Heating,” Mar 2015-Dec 2015.
Atheer Dhafir Yasin, “Pressure Distribution and Possible Aerodynamics Improvement Around a F1 Racing Car via experimental Testing under Wind Tunnel,” Mar 2015-Dec 2015.
Al-Hasan Ali Hussein Al-Bar, “Numerical Study of Laser‐Tissue Interaction using Radiative Transfer Equation and Heat Conduction Equation,” Mar 2015-Dec 2015.
Aiham Al-Hawar, “Modeling Heat Conduction Across Materials with Different Properties: Analysis and Comparisons between Macro‐scale and Nano‐scale Models,” Mar 2015-Dec 2015.
Wong Shao Ing, Yong Mun Cheng, and Arthur Yong King Lumn, “Design of a Waste Energy Recovery Device,” Sept. 2014 – May 2015.
Moh Hiong Hoong, Kho Si How, and Mohd. Nadzrin Zaimuariffudin Shukri, “Automotive Thermoelectric Generator,” Sept. 2014 – May 2015.
Shariful Islam and Ali Hamza Sheikh, “Passive Cooling in An Office Building in Malaysia,” Sept. 2014 – May 2015.
Anderson Lim Chin Hsien, Louis Ting Sie Terng, and Ng Kuang Keng, “An Economical Cooling System for Improving Efficiency of Commercial Solar Cells on Residential Roof,” Feb 2014-Dec. 2014.
Leslie Toh Kok Lik, Louis Yong Sze Heng, and Gabriel Kuon Zhi Ling, “Solar Powered Aircraft: Concept and Model,” Feb 2014-Dec. 2014.
Adli Hafiz Bin Abdilah, Ahmad Faqimi Bin Mohamad, and Mohd Najib Bin Abdul Rahim, “A proposal for the new system for magnetic levitation (maglev) train railway system using point to point accelerator,” Sept. 2013 – May 2014.
Yong Suk Seng and Andrew Kuek Han Sheng, “The design of a micro-hydro generator,” Sept. 2013 – May 2014.
Michael Cheong Khien Leong and Wong Siew Kong, “Replicating steam engine (piston or turbine) generator and efficiency improvement,” Sept. 2013 – May 2014.
Arif Muhaimin Bin Ahmad Fadzli, Khairul Helmi Bin Azhar, and Syed Mohd Ridzuan Bin Wan Othman, “Design of a Solar Cooker based on Climate in Malaysia,” Sept. 2013 – May 2014.
Tan Jing Yang, Ivy Hii Xiao Chien, and Chai Chia Hin, “Development of an economically viable solution to minimize active cooling resources and solar heating of walls in a residential home,” Sept. 2013 – May 2014.
Kelving Sung Dek Ong, Ngu Sie Wee, and Yek Nai Wee, “A casing design for compact desktop computers: simulation, prototyping, and optimization,” Sept. 2013 – May 2014.
Simon Sim Wee Siang, Nyau Siow Yin, and Wells TangChok Choo, “Energy efficient and uniform cooling re-modeling for Swinburne Sarawak campus,” Sept. 2013 – May 2014.
Liu Kian Hoong and Devaraj Shanmugam, “Numerical Investigation of the Possibility of Melting a Nanospot using A Focused Electron Beam at the Ballistic/Semi-Ballistic Heat Transfer Regime,” Sept. 2012 – May 2013.
Yeshan Elansaka Sri Nissanika and Somisena Yakupitiyage Anushka Santhika Thenuwara, “Simulation of Heat Conduction/Phonon Transport in Multi-Layered Nanofilms,” Sept. 2012 – May 2013.
Mohammad Nazri Bin Kiprawi, “Pressure Distribution of Roof-Structure at Low-Rise Building,” Feb. 2013 – May 2013.
Hazim Bin Abdul Rahman, Ahmad Syamim Deen Bin Abdul Rahman Deen, and Mohammad Azmudin Bin Isa @ Danial, “Thermoacoustic Heat Engine Table Fan,” Feb. 2013 – May 2013.
Ling Siong Huo and Mufaddal Hussain, “Passive Cooling of a House in Malaysia,” Sept. 2011 – May 2012.
Justin Wong and Chong Foo Kiong, “A Numerical and Experimental Investigation of the Thermal Properties of Novel Open-Cell Aluminium Metal Foams,” Sept. – Dec. 2011.
Vincent Chong Fui Loong and Japheth Lau Zi Jun, “Nano-Gap Thermophotovoltaic,” Feb. – Dec. 2011.
Lau Ching Ho and Tang Chee Min, “Numerical Study of Heat Conduction and Temperature Profiles inside Nanostructures,” Feb. – Dec. 2011.
Kelvin Yu Ek Hon and Chiew Soon How, “A Light Scattering Based System in Detecting Water Pollution,” Feb. – Dec. 2011.