Add one or more fleets
Add boats
Minimum information per boat is the sail number and either skipper name or boat name
Configure your regatta
Add the regatta name and date
Set check-boxes on boats that will be participating in the regatta
Note you will need to select a fleet, this need not be consistent across regattas
Save Regatta when you are happy
Return to the home screen and select the regatta to get started
Add fleet starts as races begin
Select a boat as it comes up to the finish line
The keypad can be used to filter boats, any part of the sail number will be matched
i.e. Searching for a portion of the sail number 14 will return matches for 141234, 114414 etc.
Hit Mark to capture boat finish time
In the Fleet Name, type in the fleet name
Hit "Add Fleet"
Click on an existing fleet
Uncheck "Create New Fleet"
Update the fleet name
Update Fleet
Long-press on the fleet
Accept the delete prompt
To add a new boat add the boat information on the lower half of the screen
Hit "Add Boat" when done
Long press the boat in the top half of the screen
Accept the prompt to delete
Add the regatta name
Add the regatta date
Click on Create
Select the regatta from the drop-down
Add checkmarks next to each participating boat
Make sure to set the fleet (as this may change from regatta to regatta)
Hit "Save Regatta"
Hit "Back" when done
Go to the Home screen
Click on the Regatta name
Select the fleet
Hit "Start"
Accept the prompt to start the race
NOTE: Time is marked from when START is selected
Use the keypad to enter any part of the sail number
Select the boat about to cross the line
Hit "Mark Boat" as the finish line is crossed
Go to the home screen
Select "Results"
Select the regatta of interest in the first drop-down
Select the fleet to be reported in the "Select Fleet" dropdown
Click on "Email Results" to email a CSV of the races to the race committee