Embedded Files
I thought you may be interested in a simple modification to a hammer trolley. These trollies come with rubber wire grips that break after time and are expensive to replace. I’ve removed the rubbers and their metal retaining clips and attached a strip of wood along the top bar. I picked up the existing threaded holes in the top bar. Terry or spring clips are then screwed into the wood to hold the wires.
Regards, Dick
Pole Vault / High Jump Height Measure, digital
Found by Bob Hammond
Pole Vault/ High Jump Height Measure, digital
Leica laser measure on pole, includes video camera
Created by Bob Hammond
EDM Prism support for solo setup
Created by Dick Sharp
Implement support device for holding implements when on scales
Created by Dick Sharp
Implement support device for scales with Shot support already in place
Created by Dick Sharp
Pole Vault Upright Position Indicator
Attaches to clip board, indicates upright position
Note reverse of card shows what is visible on card hanging down
Created by Dick Sharp
Mini windgauge
Note does not connect to photofinish systems
found by Bob Hammond
No Flags System
Officials have small black buttons to send wireless signal to main console indicating flag decision to leader
Created by Bob Hammond
No Flag system could also be used for Track Umpires to relay signal wirelessly to Track Referee of infringement or not
Idea by Bob Hammond
Built for Swansea European IPC 2013
Left is Shot Putt Return Shoot, decking planking
Right Long Jump Distance Indicator Board
Above Technical Room Tent at Swansea European IPC Champs 2013 featuring event site box setup area, Admin area and back left Equipment Officer Check Area
Far Left Event Box Setup area and Video Source Base at back
Mid left Equipment Area Check
Near left Implement Storage on trolley
Below far left throwing frame assembly area for specific event denoted by colour card on walls
Below mid left Racing Chair Storage area
Save bending down to read the tape.
Long Spike handle with clever ape holder at base, permits pull thru of tape while still in standing position and then lift to read the tape.
Created by Dick Sharp in response to a specific request
Ffield Clock, remote control v1 seen here
v2 has an App for control, with programmable buttons
contact Bob Hammond for further details
Google Sites
Report abuse