APIVOX SMART MONITOR

A revolutionary application in the series of instruments for acoustic control of bee families.

BEST APPLICATION FOR PRACTICAL USE IN THE APIARY.​

APIVOX SMART MONITOR is an exclusive application for beekeepers, that will allow you to monitor the status of colonies of bees and to forecast possible problems. ( Android OS only)

Its advantages - ease of installation and configuration, easy to use, reliability of control results.

Install the application on an Android smartphone, make the setting, using a special audio file, and your application will be ready to use.

Insert the microphone of your smartphone inside the hive, press the "Start" button, and after a while you will get a diagnosis about the status of your bees.

What useful features you will get, ​if you'll buy APIVOX SMART MONITOR

YOU CAN SPEND ONLY 15 SECONDS FOR INSPECTION OF THE HIVE WITHOUT OPENING IT

Using our application, which turns your smartphone into an instrument for acoustic control of bee families, you can check the condition of your bees without opening the beehive and without disturbing the bees. Even the most aggressive bees will continue their work without paying attention to you. Such feature will de very useful for urban beekeepers.

YOU WILL RECEIVE DIAGNOSTIC REPORTS ABOUT THE STATE OF BEES' COLONY

APIVOX SMART MONITOR generates diagnostic messages after examining of the full range of bees “voices”. Messages will tell you about the general condition of the family, about its work on honey collection, about the quantity of open brood in the family, whether it is going to swarm, about possibility of the problems with the queen.

DEVICE WILL REPORT YOU ABOUT THE STATE AND RELATIVE AMOUNT OF BROOD IN THE FAMILY.

APIVOX SMART MONITOR is able to recognize the voices of bees caring for brood in the family and to diagnose the relative amount of brood. The device will easily detect the appearance of brood in the spring and the increase in its number in the pre-swarming period. It is easy for APIVOX SMART MONITOR to determine the end of brood withdrawal in the fall. With skillful handling, the device can show the presence of open queen cells in the family and the quality of care for them.

DEVICE WILL DETERMINE THE READINESS OF THE FAMILY FOR COMMODITY HONEY HARVEST.

APIVOX SMART MONITOR determines the state of the family in terms of its balance between brood rearing and growth, and readiness to participate in honey collection. Device distinguishes the state of the family, when the bees will eat up all the honey, which they bring, using it to build up the strength of the family, and the state, when the family supports its strength without prejudice to obtaining marketable honey. This mode will allow beekeeper to understand whether the family will give marketable honey, or whether appropriate measures should be taken in order not to lose possibility of obtaining marketable honey.

YOU WILL RECEIVE EARLY DIAGNOSIS ABOUT THE BEGINNING OF SWARMING STATE

AAPIVOX SMART MONITOR can predict the swarming up to 14 days before the swarm issuance. Usually, the first diagnosis of possibility of swarming we receive on the stage of building of queen cups by the bees. The beekeeper will have time to take any action to prevent both – the swarming process and leaving of the swarm.

YOU WILL OBTAIN POSSIBILITY OF MONITORING THE STATE OF WINTERING BEES WITHOUT OPENING THE HIVE.

APIVOX SMART MONITOR, switched into winter mode, will help you to control the quality of wintering of bees' colony and its need for help, in such situations as lack of food or anxiety from external causes. In addition, in this mode you can receive information about the beginning of brood rearing by the bees during the wintering period.

YOU WILL OBTAIN THE POSSIBILITY OF EARLY DIAGNOSIS OF LOSS OF QUEEN AND DIAGNOSTICS OF OTHER PROBLEMS WITH THE QUEEN.

In the process of working with the bees, most beekeepers are concerned about the problem of monitoring the loss of the queen or the presence of problems with the queen in the family of bees. APIVOX SMART MONITOR solves this problem when conducting regular family monitoring in General State Control mode, without using any special additional modes.

DEVICE WILL HELP YOU TO FIND THE QUEEN, OR EXACTLY DETERMINE ITS LACK, WHEN THE FAMILY IS DIVIDED IN HALF WITHOUT FINDING THE QUEEN.

Very often, beekeepers use a method such as dividing the family in half to obtain the offshoots and for repayment of the swarming state of the family. Usually, the search for the queen becomes quite complex and, most importantly, a long task. If the queen is labeled, everything is easier, and if not... APIVOX SMART MONITOR will unmistakably determine the half of the family where is no queen. You will not lose a valuable queen or capped queen celll, because you will know exactly, in what beehive you need to give it, and in which you should not give it in no case.

DEVICE WILL HELP YOU TO FIND THE BEST TIME FOR CHANGING THE OLD QUEEN TO A NEW ONE OR QUEEN CELL

APIVOX SMART MONITOR is designed for selecting the optimum time for inserting new queen into the colony, and to control her acceptance by the bees. It will help to prevent the loss of expensive queen during the process of replacement.

TO BUY THE APP APIVOX SMART MONITOR

THE MAIN MODES ​OF APIVOX SMART MONITOR

In this mode device starts its work by default, after switching on. The purpose of this mode is to achieve correct settings of the device, allowing you to see the bees' signals qualitatively and confidently, in order to obtain correct results of further analysis of the family's state. The second function of this mode is to quickly monitor the current state of the family, using a bar chart, or long-term monitoring of signals in the form of a sonogram..

The basic mode of the device, which gives the most complete assessment of the family's condition, its working capacity on honey collection, possible problems with the queen, predicts the onset of a swarming state, estimates the amount of brood. All this can be done using two intervals of measurement of different length, with obtaining information about the state of the family - instantaneous, or more averaged. The result of control in this mode is a text message describing the state of the family.

Is a procedure, designed for quick assess of the state of bees' families, regarding to the readiness for swarming. As a rule, already the borderline state shown by the device, ensures that you will find swarming process at the stage of making of swarming queen-cups on peripheral frames of the nest. And this means that you can immediately take measures, so this family will not lose about two weeks of summer season, and you will not lose bees and honey.

This mode allows you to see the best moment for inserting a new queen in the family after you've deletted old one. Everyone can see the first phase of the sensation of loss of the queen by the bees - anxiety and ventilation on the porch with the open gland of Nasonov, but the second phase, when the bees realize, that the queen is lost and are ready either to make queen cells, or to accept any new or old queen, can see only our device. Exactly this moment will show the device in the Readiness to Accept New Queen mode.

This is essentially the continuation of work of previous mode. It's task is to show how the process of acceptance on new queen is going ... If the family do not emit signals, related to the loss and recovery of the queen, the anxiety disappears, and the family returns to normal work, then it seems to be a tendency to adopt a new queen ... Otherwise, as a rule, the family remain excited for a quite long time ....

This is a procedure that allows you to see the trend in the state of the reproductive activity of the family. This control takes some time and is presented in graphical form for clarity. The trend in the position of the graph shows the approximate ratio between the amount of work on brood care, and the total volume of work in the family. This mode is designed to control families mainly in spring and autumn.

This is a procedure, that allows you to see the trend in the ratio between development and reproduction of the family, and works aimed at collecting and processing of marketable honey. The use of this mode will show you, whether the family is ready to provide you with commercial honey, or its flight activity will be aimed at meeting her own needs. After all, good honey gathering is possible only with the balance between in-hive works, and honey-collection activity.


OUR AWARDS

© Copyright 2016 . Glebskij. All rights reserved .

Registred trade mark