Research
Interests
Hypersonic Aerodynamics, Shock-Boundary Layer Interaction, Shock Interactions, Plasma Aerodynamics
research topıcs
Shock Interactıon mechanısms
Shock-shock interactions, shock-boundary layer interactions, time periodic flow on double wedge.
3-d effects ON HYPERSONIC FLOWS
Effects of Double-Wedge Aft Angle on Hypersonic Laminar Flows
tHESIS SUPERVISED
Undergraduate
Muhammet Mustafa Karakaş, "CFD INVESTIGATION OF A DIVERTERLESS SUPERSONIC INLET", Samsun University, Department of Aerospace Engineering, January 2024.
Fatih KILINÇARSLAN, Hazal TİLER, "AERODYNAMIC AND AEROACOUSTIC INVESTIGATION OF A CAVITY FLOW ON NACA 0018 AIRFOIL", Samsun University, Department of Aerospace Engineering, January 2024.
Esin Ar, "NUMERICAL INVESTIGATION OF THE AERODYNAMIC AND AEROACOUSTIC CHARACTERISTICS OF FLOW ON A ROUGH AIRFOIL", Samsun University, Department of Aerospace Engineering, January 2024.
Mustafa Uzuntaş, "VISUALIZATION OF THE FLOW ON THE AIRFOIL UNDER THE INFLUENCE OF THE MAGNUS FORCE AND EXAMINATION OF THE EFFECTS ON FORCES ON THE WING", Samsun University, Department of Aerospace Engineering, January 2024.
Kübra Seyhan, Beyza Cinan, "EXPERIMENTAL INVESTIGATION OF THE BIOINSPIRED WINGLET DESIGN ON THE PERFORMANCE", Samsun University, Department of Aerospace Engineering, January 2024.
Abdullah Arslan, "DEVELOPMENT OF SUPERSONIC AIR INLET DESIGN SOFTWARE COMPATIBLE WITH VARIABLE SUPERSONIC FLIGHT CONDITIONS", Samsun University, Department of Aerospace Engineering, January 2024.
Muharrem Nebioğlu, İlayda Sevgi, "INVESTIGATION OF THE EFFECT OF AN ENGINE AIR INTAKE GEOMETRY ON HAMMER SHOCK IN SUPERSONIC AIRCRAFT USING COMPUTATIONAL FLUID DYNAMICS METHODS", Samsun University, Department of Aerospace Engineering, June 2023.
Mehmet Arslan, "NUMERICAL AND EXPERIMENTAL COMPARISION OF THE DBD PLASMA ACTUATORS INTEGRATED ON AIRFOIL", Samsun University, Department of Aerospace Engineering, June 2023.
İbrahimşah Zengin, "INVESTIGATION OF THE CHANGE OF DOWNFORCE DEPENDING ON THE DISTANCE OF THE FRONT WING TO THE GROUND IN AN OPEN WHEEL RACING CAR", Samsun University, Department of Aerospace Engineering, June 2023.
Beril Dündar, "FLOW VISUALIZATION ON A RACE CAR AND COMPARISON OF THE DRAG FORCE WITH EXPERIMENTAL METHODS", Samsun University, Department of Aerospace Engineering, December 2022.
Melike Çimen, Hatice Beyza Şen, "INVESTIGATION OF REYNOLDS NUMBER EFFECTS AT TRANSONIC FLOW USING COMPUTATIONAL FLUID DYNAMICS", Samsun University, Department of Aerospace Engineering, December 2022.
Mehmet Arslan, Afra Bildik, "NUMERICAL AND EXPERIMENTAL COMPARISION OF THE DBD PLASMA ACTUATORS INTEGRATED ON AIRFOIL", Samsun University, Department of Aerospace Engineering, December 2022.
Neziha Betül Tunçalın, "PERFORMING AERODYNAMIC ANALYSIS OF SPACEX'S RAPTOR ENGINE NOZZLE USING CFD METHODS", Samsun University, Department of Aerospace Engineering, December 2022.
Ercan Umut Danışan, Yunus Emre Akdeniz, "EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE CONVERGENT-DIVERGENT NOZZLE OF SAMSUN UNIVERSITY’S SUPERSONIC WIND TUNNEL", Samsun University, Department of Aerospace Engineering, June 2022.
Rıdvan Taşçıoğlu, "INVESTIGATION OF CAVITY FLOW-WING INTERACTIONS AT LOW SUBSONIC VELOCITIES AND VISUALISATION OF CAVITY FLOW", Samsun University, Department of Aerospace Engineering, June 2022.
Nursena Sevinç, Mücahit Yazanel, Tayfun Çobanoğlu, "EXPERIMENTAL STUDY OF THE EFFECT OF PLASMA ACTUATOR APPLIED ON CYLINDER AND NACA 0018 AIRFOIL ON FLOW SEPARATION", Samsun University, Department of Aerospace Engineering, June 2022.
Eda Nur Ulutürk, Kevser Narkuz, "NUMERICAL SIMULATION AND MODELLING OF CAVITY-BASED FLAMEHOLDER CONCEPTS IN SCRAMJETS", Samsun University, Department of Aerospace Engineering, June 2022.
Kamil Koca, Fatma Uslu, "COMPUTATIONAL INVESTIGATION OF REYNOLDS NUMBER EFFECTS AT TRANSONIC FLOW", Samsun University, Department of Aerospace Engineering, December 2021.
Ercan Umut Danışan, Yunus Emre Akdeniz, "NUMERICAL SIMULATION OF A CONVERGENT DIVERGENT SUPERSONIC NOZZLE FLOW", Samsun University, Department of Aerospace Engineering, December 2021.
Muhammed Osama Balkhi, Sehle Cengiz, "NUMERICAL COMPUTATION OF MAXIMUM AERODYNAMIC LOADS FOR AN ENGINE INTAKE IN SUPERSONIC AIRCRAFTS", Samsun University, Department of Aerospace Engineering, June 2021.
Gökçen Jurnal, "EXPERIMENTAL ANALYSIS OF THE EFFECT OF PLASMA ACTUATOR ON FLOW CONTROL ON NACA 4412 AIRFOIL", Samsun University, Department of Aerospace Engineering, June 2021.
Fatmanur Aleyna Özcan, "NUMERICAL INVESTIGATION OF SHOCK WAVE BOUNDARY LAYER INTERACTIONS OF DIFFERENT RAMP MODELS", Samsun University, Department of Aerospace Engineering, June 2021.
Emine Yurdusay, Esra Saydan, "NUMERICAL ANALYSIS OF AERODYNAMIC PERFORMANCE DEGRADATION OF NACA 0012 AND NACA 64-618 DUE TO ICE ACCUMULATION", Samsun University, Department of Aerospace Engineering, June 2021.
Onur Tatlı, "NUMERICAL INVESTIGATION OF PLASMA ACTUATORS ON A NACA 4412 AIRFOIL", Samsun University, Department of Aerospace Engineering, Jan 2021.
Umut Arık, "COMPUTATIONAL ANALYSIS OF HYPERSONIC SHOCK-SHOCK INTERACTION AROUND TWO HEMI-SPHERE CYLINDER", Samsun University, Department of Aerospace Engineering, May 2020.
Kübranur Bilik, Seda İpkin, "COMPUTATIONAL INVESTIGATION OF SUPERSONIC WEDGE FLOWS FOR DIFFERENT RAMP ANGLES", Samsun University, Department of Aerospace Engineering, May 2020.
Kutluhan Kutlu, "AERODYNAMIC ANALYSIS OF MISSILES WITH VARIOUS TAIL CONTROL SURFACE TYPES", Samsun University, Department of Aerospace Engineering, May 2020.
Cihangir Celal Palacı, "COMPUTATIONAL MODELING OF REAL GAS FLOWS OVER SHARP-CONE-FLARE AND BLUNT CONE GEOMETRIES", Samsun University, Department of Aerospace Engineering, May 2020.
Rabia Sönmez, Harun Denizli, "NUMERICAL INVESTIGATION OF SHOCK INTERACTIONS IN A SUPERSONIC RETROPROPULSION FLOW", Samsun University, Department of Aerospace Engineering, December 2019.
Cem Furkan Onaran, "EXPERIMENTAL AND NUMERICAL INVESTIGATION OF FLOW OVER DIFFERENT WEDGE GEOMETRIES AT A SUPERSONIC FLOW", Samsun University, Department of Aerospace Engineering, December 2019.
İbrahim Yıldız, "COMPUTATIONAL FLUID DYNAMIC ANALYSIS OF SUPERSONIC AIR INTAKE", Samsun University, Department of Aerospace Engineering, December 2019.
Büşra Nur Yüceur, "COMPUTATIONAL INVESTIGATION OF THE WINGLET DESIGN", Samsun University, Department of Aerospace Engineering, December 2019.
Hatice İrpik, Tuğba Zaman, Yunus Emre Karasu, "EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE FLOW AROUND AN AIRFOIL AND EVALUATION OF A SUBSONIC WIND TUNNEL", Samsun University, Department of Aerospace Engineering, May 2019.
SUPERVISED PROJECTS
Postgraduate
Cihad Köse, "DBD Plazma Aktüatörü İle Sesüstü Hızlarda Akış Kontrolü", University of Samsun BAP, Feb 2023.
Undergraduate
Büşra AL, Sena TURAN, "Hipersonik Akışta Hava Araçlarının Üç Farklı Burun Geometrisi İle Şok Dalgalarının Arasındaki Etkileşimlerin İncelenmesi", TÜBİTAK Research Project Support Programme for Undergraduate Students (2209/A), Feb 2024.
Kübra SEYHAN, Beyza CİNAN, "Bioinspired Winglet Tasarımlarının Kanat Ucu Girdaplarına Ve Aerodinamik Performansa Olan Etkisinin Deneysel Olarak İncelenmesi", TÜBİTAK Research Project Support Programme for Undergraduate Students (2209/A), Feb 2024.
Esin AR, "Kanat Profili Üzerinde Pürüzlülük Etkisinin Aerodinamik ve Aeroakustik Etkisinin İncelenmesi", TAI LIFTUP Industry Oriented Research Project Support Programme, October 2023.
Fatih KILINÇARSLAN, Hazal TİLER, "Bir Kanat Profili Üzerindeki Kavite Akışının Aerodinamik ve Aeroakustik İncelenmesi", TAI LIFTUP Industry Oriented Research Project Support Programme, October 2023.
Abdullah ARSLAN, Cihan TİRYAKİ, Cihan DAĞDAGÜL, "Süpersonik Hava Alığı Tasarım Yöntemleri ve 2 Boyutlu Analizi", TAI LIFTUP Industry Oriented Research Project Support Programme, October 2023.
M. Mustafa KARAKAŞ, Gökberk AKYÜREK, Selim KÖÇ, "Diverterless Supersonic Inlet (DSI) Geometrisi Oluşturarak ve Farklı Uçuş Koşullarında İnlet Performansının Analiz Edilmesi", TAI LIFTUP Industry Oriented Research Project Support Programme, October 2023.
Cihan Tiryaki, "Şok Dalgaları ve Plazma Jet Akışı Arasındaki Etkileşimin Sayısal ve Deneysel Metotlarla İncelenmesi", TÜBİTAK Research Project Support Programme for Undergraduate Students (2209/A), Sep 2023.
Mustafa Uzuntaş, "Magnus Kuvveti Etkisi Altında Kanat Profili Üzerindeki Akışın Görüntülenmesi ve Kanat Üzerindeki Kuvvetlere Etkilerinin İncelenmesi", TÜBİTAK Research Project Support Programme for Undergraduate Students (2209/A), Sep 2023.
Muharrem Nebioğlu, İlayda Sevgi, "Süpersonik uçaklarda bir motor hava alığı geometrisinin Hammer şok üzerindeki etkisinin Hesaplamalı Akışkanlar Dinamiği yöntemleri ile incelenmesi", TÜBİTAK Research Project Support Programme for Undergraduate Students (2209/A), Dec 2022.
Neziha Betül Tunçalın, "Süpersonik Hızlar için Yakınsak- Iraksak Lüle ve Dual Bell Lülenin Hesaplamalı Akışkanlar Dinamiği Kullanılarak İncelenmesi", TÜBİTAK Research Project Support Programme for Undergraduate Students (2209/A), Dec 2022.
Ramazan Akyol, "Farklı tiplerdeki girdap üreteçlerinin NACA 0018 kanat tipi üzerindeki akımın ayrılma noktasına ve sürükleme kuvvetine etkilerinin deneysel olarak incelenmesi", TÜBİTAK Research Project Support Programme for Undergraduate Students (2209/A), Dec 2022.
Mehmet Arslan, Afra Bildik, "Bir Kanat Profili Üzerine Uygulanan Plazma Aktüatörünün Akış Alanına Etkisinin Deneysel Ve Sayısal Olarak Karşılaştırılması Ve Farklı Geometrilerde Sayısal Olarak İncelenmesi", TÜBİTAK Research Project Support Programme for Undergraduate Students (2209/A), May 2022.
Beril Dündar, İbrahimşah Zengin, "Bir Araç Üzerindeki Akışın Görüntülenmesi Ve Oluşan Sürükleme Kuvvetinin Deneysel Ve Sayısal Yöntemlerle Karşılaştırılması", TÜBİTAK Research Project Support Programme for Undergraduate Students (2209/A), May 2022.
Rıdvan Taşçıoğlu, "Düşük ses altı hızlarda kavite akışı - kanat etkileşiminin incelenmesi ve kavite akışının görüntülenmesi", TÜBİTAK Research Project Support Programme for Undergraduate Students (2209/A), November 2021.
Nursena Sevinç, Tayfun Çobanoğlu and Mücahit Yazanel, "Farklı Geometrik Cisimler Üzerine Uygulanan Plazma Aktüatörün Akış Ayrılması Üzerine Etkisinin Deneysel Olarak İncelenmesi", TÜBİTAK Research Project Support Programme for Undergraduate Students (2209/A), November 2021.
Sehle Cengiz and Muhammed Osama Balkhi, "Süpersonik Uçaklarda Motor Hava Alığı için Maksimum Aerodinamik Yüklerin Hesaplamalı Akışkanlar Dinamiği Yöntemleri (HAD) ile Çıkartılması", TÜBİTAK Industry Oriented Research Project Support Programme for Undergraduate Students (regarding to TAI LIFTUP), February 2021.
Muhammed Osama Balkhi, Sehle Cengiz, "Süpersonik Uçaklarda Motor Hava Alığı için Maksimum Aerodinamik Yüklerinin StarCCM Yazılımı ile Çıkartılması", TAI LIFTUP Industry Oriented Research Project Support Programme, October 2020.
Gökçen Jurnal, “NACA 4412 Uçak Kanadı Üzerine Uygulanan Plazma Aktüatörün Akış Kontrol Etkisinin Deneysel Olarak İncelenmesi”, TÜBİTAK Research Project Support Programme for Undergraduate Students (2209/A), September 2020.
pAST PROJECTS
"Hipersonik Şok Etkileşim Mekanizmalarının Ortaya Çıkan Yüzey Isı Transferi Açısından Değerlendirilmesi", TÜBİTAK 1001, Researcher, 2016-2020.
"Hipersonik akışta şok-şok ve şok-sınır tabaka etkileşim mekanizmalarının incelenmesi ve ortaya çıkan yüzey ısı transferi açısından değerlendirilmesi", İTÜ-BAP, Researcher, 2016-2018.
“TURKSAT 3USAT uydusunun geliştirilmesi ”, TURKSAT-İTÜ, Researcher, 2011-2012.
"Flap hareketini yapan profilin etrafındaki akışın kontrolü", İTÜ-BAP, Researcher, 2010-2012.