• Nuoyan Xu, Ye Qian*, Jing Yu*, & Christopher K.Y. Leung. "Tensile performance of 3D-printed Strain-Hardening Cementitious Composites (SHCC) considering material parameters, nozzle size and printing pattern." Cement and Concrete Composites (2022):104601

  • Alrefaei, Y., Wang, Y. S., Qian, Y.*, & Dai, J. G. "Effects of Solid Activator and Fly Ash on Rheology and Thixotropy of One-Part Alkali-Activated Pastes." Journal of Advanced Concrete Technology 20, no. 3 (2022): 139-151.

  • Qian, Ye.* "Effect of polycarboxylate ether (PCE) superplasticizer on thixotropic structural build-up of fresh cement pastes over time." Construction and Building Materials 291 (2021): 123241.

  • Liu, Z., Li, M., Weng, Y., Qian, Y., Wong, T. N.*, & Tan, M. J. "Modelling and parameter optimization for filament deformation in 3D cementitious material printing using support vector machine." Composites Part B: Engineering 193 (2020): 108018.

  • Y.W.D. Tay, Y. Qian* and M.J. Tan. “Printability region for 3D concrte printing using slump and slump flow test.” Composites Part B: Engineering (2019): 106968

  • Tay, Y. W. D.*, Ting, G. H. A., Qian, Y., Panda, B., He, L., & Tan, M. J. "Time gap effect on bond strength of 3D-printed concrete." Virtual and Physical Prototyping 14, no. 1 (2019): 104-113.

  • Lu, B., Weng, Y., Li, M., Qian, Y., Leong, K. F., Tan, M. J., & Qian, S.* "A systematical review of 3D printable cementitious materials." Construction and Building Materials 207 (2019): 477-490.

  • Lu, B., Qian, Y., Li, M., Weng, Y., Leong, K. F., Tan, M. J., & Qian, S.* "Designing spray-based 3D printable cementitious materials with fly ash cenosphere and air entraining agent." Construction and Building Materials 211 (2019): 1073-1084.

  • Ye Qian*, Siwei Ma, Shiho Kawashima and Geert De Schutter. “Rheological characterization of the viscoelastic solid-like properties of fresh cement pastes with nanoclay addition.” Theoretical and Applied Fracture Mechanics (2019): 102262

  • Ye Qian* and Geert De Schutter. “Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE)”. Cement and Concrete Research. 111 (2018): 15-22

  • Ye Qian*, Karel Lesage, Khadija El Cheikh and Geert De Schutter. “Effect of polycarboxylate ether superplasticizer (PCE) on dynamic yield stress, thixotropy and flocculation state of cement pastes in consideration of the Critical Micelle Concentration (CMC)”. Cement and Concrete Research. 107 (2018): 75-84

  • Ye Qian and Shiho Kawashima*. "Distinguishing dynamic and static yield stress of fresh cement mortars through thixotropy". Cement and Concrete Composites. 86 (2018): 288-296

  • Ye Qian* and Geert De Schutter. “Different effects of NSF and PCE superplasticizer on adsorption, dynamic yield stress and thixotropy of cement pastes”. Materials. 11(2018)

  • Siwei Ma, Ye Qian and Shiho Kawashima*. “Non-linear structural build-up of fresh cement pastes incorporating viscosity modifying admixtures”. Cement and Concrete Research. 108 (2018): 1-9

  • Ye Qian and Shiho Kawashima*. "Use of creep recovery protocol to measure static yield stress and structural rebuilding of fresh cement pastes". Cement and Concrete Research. 90 (2016): 73-79

  • Ye Qian and Shiho Kawashima*. "Flow onset of fresh mortars in rheometers: contributions of paste deflocculation and sand particle migration". Cement and Concrete Research. 90 (2016): 97-103

  • Ye Qian*, Dawei Zhang and Tamon Ueda. "Interfacial tensile bond between substrate concrete and repairing mortar under freeze-thaw cycles". Journal of Advanced Concrete Technology. 14 (2016): 421-432