Cleaning & upkeep

BEFORE YOU START

Don't spray chemicals such as insecticide, benzene, thinner, etc.
Don't hang items from the Panel, the contact with the items can cause permanent damage to the screen
Gently wipe the screen with a soft microfiber cloth
Do not use aerosol sprays, bleach or abrasive cleaners.
Wipe the printed surface buttons (Power, Home, Back, Input, Vol - , VOL +) on the front of the Panel carefully with the soft dry cloth.
It is recommended to use a small duster with handle to clean a narrow space like underneath of the panel

Recommended Cleaner click picture for purchase link

Dust may stick near the vent on the bottom of the Panel.

Dust buildup in this area may cause failure and overheating

Spray the microfiber cloth with the suggested spray

(not dripping wet)

Then lightly wipe the remote to disinfect

Note: If the battery fluid leaks, wipe off the fluid in the battery compartment of the remote control before you insert new batteries

Make sure the device is turned off and the power cable is unplugged from the power outlet.
Never spray or pour any liquid directly onto the screen or case.
Handle the device with care, as a darker-colored device, if scuffed, may show marks more clearly than a lighter-colored device.
Do not use the system continuously for long periods of time.

Use a clean, soft, lint-free cloth and gently wipe down your screen to remove dust and other particles.
If the screen is still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth; then wipe the screen.

Use a clean, soft, lint-free cloth and gently wipe down the case to remove dust and other particles.
If the case is still not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.

ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the display screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the device.
ViewSonic® will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.

Important: If condensation appears between the glass and the panel, keep the display turned ON until the moisture disappears.

Page updated

Report abuse