Embedded Files
- Cutting of the upper hopper was carried out
- Cutting of the upper hopper was carried out
- Tubes were cut that will serve as gear shafts.
- Tubes were cut that will serve as gear shafts.
- Aluminium rod cuts, each rod is 0.5 m long.
- Aluminium rod cuts, each rod is 0.5 m long.
- The realization of the inner tube was commissioned.
- The realization of the inner tube was commissioned.
- The supports of the internal tube were made, using the CNC router.
- The supports of the internal tube were made, using the CNC router.
- The inner tube was blown out.
- The inner tube was blown out.
- The hole for the axle was made in the upper hopper
- The hole for the axle was made in the upper hopper
Report abuse