Publications

Pubblicazioni su rivista

Boschetto A., Costanza G., Quadrini F., Tata M. E. (2007) Cooling rate inference in Aluminum alloy squeeze casting. Materials Letters, Vol.61, Issues 14-15, June 2007, Pages 2969-2972

Boschetto, Ruggiero A., Veniali F. (2007) Deburring of sheet metal by barrel finishing. Key Engineering Materials Vol. 344 (2007) pp 193-200.

Gisario A., Barletta M., Boschetto A. (2008) Characterization of laser treated steels using instrumented indentation by cylindrical flat punch. Surface and Coatings Technology, Vol.202, Issue 12, 15 March 2008, Pages 2557-2569.

Boschetto A., Veniali F. (2009) Part and media tracking in barrel finishing. International Journal Of Machining And Machinability Of Materials, vol. 6 (3-4): 305-321 , ISSN: 1748-5711.

Boschetto A., Veniali F. (2010) Intricate shape prototypes obtained by FDM. International Journal Of Material Forming, vol. 3; p. 1099-1102, ISSN: 1960-6206.

Boschetto A., Quadrini F. (2011) Powder size measurement by acoustic emission, Measurement, Volume 44, Issue 1, January 2011, Pages 290-297.

Boschetto A., Quadrini F., Squeo E. A. (2011) Extracting local mechanical properties of steel bars by means of instrumented flat indentation, Measurement, Volume 44, Issue 1, January 2011, Pages 129-138.

Gisario, A. Boschetto, Veniali F. (2011). Hole Damage in Drilling of Reactive Powder Concrete (RPC). Journal of Materials in Civil Engineering, ISSN: 0899-1561, doi: 10.1061/(ASCE)MT.

Boschetto, A. Gisario, F. Veniali, (2011) Neural Network Approach for Estimating the Hole Damage in Drilling Process of Reactive Powder Concrete (RPC). International Journal of Computational Materials Science and Surface Engineering, Volume 5, No.2, February 2011 ISSN: 1753-3465.

Gisario, A. Boschetto, F. Veniali, (2011) Surface transformation of AISI 304 stainless steel by high power diode laser. Optics and Lasers in Engineering, Volume 49, Issue 1, January 2011, Pages 41-51.

Bordoni M., Boschetto A., (2012) Thickening of surfaces for direct additive manufacturing fabrication. Rapid Prototyping Journal, Vol. 18 Iss: 4 pp. 308 – 318.

Bordoni M., Boschetto A. (2012). La costruzione di gusci sottili: dalla teoria matematica al prodotto finito. La matematica nella società e nella cultura, vol. V, p. 149-168, ISSN: 1972-7356.

Quadrini F., Boschetto A, Rovatti L., Santo L. (2011), Replication casting of open-cell AlSi7Mg0.3 foams, Materials Letters, Volume 65, Issues 17–18, Pages 2558-2561.

Morelli S., Grigioni M., Ferrarin M., Boschetto A., Brocco M., Maccioni G., Giansanti D. (2011). A monitoring tool of workers’ activity at Video Display Terminals for investigating VDT-related risk of musculoskeletal disorders Original Research Article, Computer Methods And Programs In Biomedicine, ISSN: 0169-2607.

Boschetto A., Giordano V., Veniali F. (2012) Modelling micro geometrical profiles in fused deposition process. The International Journal of Advanced Manufacturing Technology, 61(9-12), pp. 945-956.

Boschetto A., Giordano V. (2012). Powder sampling and characterization by digital image analysis. Measurement, Vol. 45, Issue 5, pp. 1023-1038, ISSN: 0263-224.

Boschetto A., Giordano V., Veniali F. (2013). 3D roughness profile model in Fused Deposition Modelling. Rapid Prototyping Journal, Vol. 19 No. 4, pp.240-252, ISSN: 1355-2546.

Boschetto A., Giordano V., Veniali F. (2013). Surface roughness prediction in fused deposition modelling by neural networks. International Journal, Advanced Manufacturing Technology, Vol. 67, Issue 9-12, pp. 2727-2742, ISSN: 0268-3768.

Boschetto A., Bottini L., Veniali F. (2013). Microremoval modeling of surface roughness in barrel finishing, International Journal of Advanced Manufacturing Technology, Vol. 69 (9-12), pp 2343-2354, DOI 10.1007/s00170-013-5186-4.

Boschetto A., Bottini L., Campana F., Consorti L., Pilone D. (2013) Investigation via morphological analysis of aluminium foams produced by replication casting, Frattura ed Integrità Strutturale, DOI: 10.3221/IGF‐ESIS.26.0z.

Boschetto A., Bottini L., D’Andrea A., Tozzo C. (2013) Interface Roughness Parameters and Shear Strength, Modern Applied Science, Vol. 7 No. 10.

Piller M., Boschetto A., Stalio E., Schena G., Errico O. (2013). Pore-scale simulation of laminar flow through a sample of aluminum foam, Journal of Porous Media, DOI: 10.1615/JPorMedia.v16.i9.10 , pages 777-793.

Boschetto A., Bellusci M., La Barbera A., Padella F., Veniali F. (2013). Kinematic observations and energy modeling of a Zoz Simoloyer high-energy ball milling device, International Journal of Advanced Manufacturing Technology, Issue 9-12, pp 2423-2435, DOI: 10.1007/s00170-013-5201-9. 69.

Boschetto A., Campana F., Pilone D. (2014). Comparison Through Image Analysis Between Al Foams Produced Using Two Different Methods, Journal of Materials Engineering And Performance Volume 23, Number 2, Page 572, DOI:10.1007/s11665-013-0745-2.

Giansanti D., Pochini M., Boschetto A., Bottini L., Giovagnoli M.R. (2014). Design of a process for image improvement in digital cytology: a preliminary application. Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization, DOI 10.1080/21681163.2014.883940.

Giansanti D., Pochini M., Boschetto A., Bottini L., Giovagnoli M.R. (2014). The focus emulation and image enhancement in digital cytology: an experience using the software Mathematica. Under publication in Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization, DOI 10.1080/21681163.2014.885852.

Boschetto A., Bottini L. (2014) Accuracy prediction in Fused Deposition Modeling. International Journal of Advanced Manufacturing Technology, 73: pp 913-928.

Boschetto A., Bottini L. (2015) Roughness prediction in coupled operations of Fused Deposition Modeling and Barrel Finishing. Journal of Materials Processing Technology, 219: 181-192.

Boschetto A., Bottini L. (2015) Triangular mesh offset aiming to enhance Fused Deposition Modeling accuracy. International Journal of Advanced Manufacturing Technology, 80 (1-4), pp. 99-111.

Boschetto A., Bottini L. (2016) Surface improvement of Fused Deposition Modeling parts by Barrel Finishing. in Rapid Prototyping Journal, vol.22 (1).

Boschetto A., Bottini L. (2016) Design for manufacturing of surfaces to improve accuracy in Fused Deposition Modeling, Robotics and Computer-Integrated Manufacturing, Vol. 37, February 2016, Pages 103-114.

Boschetto A., Bottini L., Veniali F. (2016). Finishing of Fused Deposition Modeling parts by CNC machining. Robotics and Computer-Integrated Manufacturing 41 (1), 92-101.

Boschetto A., Bottini L., Veniali F. (2016) Roughness modeling of AlSi10Mg parts fabricated by selective laser melting. Journal of Materials Processing Technology 241, 154–163.

Boschetto, Alberto, Bottini, Luana, VENIALI, Francesco (2016). Integration of FDM surface quality modeling with process design. ADDITIVE MANUFACTURING, vol. 12, p. 334-344, ISSN: 2214-8604, doi: 10.1016/j.addma.2016.05.008

Boschetto A., Bottini L., Veniali F. (2018) Surface roughness and radiusing of Ti6Al4V selective laser melting-manufactured parts conditioned by barrel finishing. International Journal of Advanced Manufacturing Technology, 94 (5-8), 2773-2790.

Boschetto A., Bottini L. (2019). Interference fit of material extrusion parts. Additive Manufacturing 25 (2019) 335–346. Doi: https://doi.org/10.1016/j.addma.2018.11.025

A. Boschetto, L. Bottini, G. Costanza, M. E. Tata. Shape Memory Activated Self-Deployable Solar Sails: Small-Scale Prototypes Manufacturing and Planarity Analysis by 3D Laser Scanner. Actuators 2019, 8(2), 38.

Boschetto A., Bottini L. (2019). Manufacturability of non-assembly joints fabricated in AlSi10Mg by selective laser melting. Journal of Manufacturing Processes 37: 425-437. doi.org/10.1016/j.jmapro.2018.12.021.

Capitoli

Boschetto A., Nicotra L. (2012). La Prototipazione rapida. In: L. Nicotra, F. Campana. Ingegneria assistita dal computer. Universitalia editice srl, ISBN/ISSN: 9788865072950.

Bellisario D., Boschetto A., Costanza G., Tata M.E., Quadrini F., Santo L. (2012). Squeeze casting of Al-Si Alloys. In Recent Researches in Metallurgical Engineering, From Extraction to Forming. InTech.

Boschetto A., Bottini L. (2014) Surface characterization of Fused Deposition Modeling. In: Santo L, Davim JP Surface Engineering Techniques and Applications: Research Advancements, IGI Global, Harrisburg, pp 249-280.

Giansanti D., Grigioni M., Pochini M., Morelli S., D'Avenio G., Boschetto A., Bottini L., Giovagnoli M.R. (2014). The e-slide in the e-Laboratory of cytology: where are we? In: The Lecture Notes in Computational Vision and Biomechanics book series 15, pp.89-98

Convegni

Boschetto A., Massimiani G., Veniali F. (2000) On the Fluidity of the Charge in Barrel Finishing. 5th Biennial Conference on Engineering System Design and Analysis, Montreaux, 10-13 luglio 2000.

Boschetto A., Marchetti E., Veniali F. (2001) Analysis of the Charge Movements in Barrel Finishing. Proceedings of ETCE 2001, Houston, 5-7 febbraio 2001.

Boschetto A., Veniali F. (2002) Radial Segregation of Workpiece in Barrel Finishing. Proceedings of AMST ’02, Udine, 20-21 giugno 2002.

Boschetto A., Di Ilio A., Paoletti A., Veniali F., “Analysis of Different Tools Behaviour in Turning of MMC’s”, 6th Biennial Conference on Engineering System Design and Analysis, Istanbul, 8-11 luglio 2002.

Boschetto A., Veniali F. (2002) Barrel Finishing of MMC’s. 6th Biennial Conference on Engineering System Design and Analysis, Istanbul, 8-11 luglio 2002.

Boschetto A., Veniali F. (2003) Barrel Finishing of Mechanical Parts by Scraps. Proceedings of XVII Congresso Nazionale AIDAA ’03, Roma, 15-19 settembre 2003.

Boschetto A., Veniali F. (2003) Trajectories of the workpiece during barrel finishing operation. 6th A.I.Te.M. Conference, Gaeta, 8-10 settembre 2003.

Boschetto A., Corinaldesi V., Moriconi G., Ruggiero A., Veniali F. (2004) A Preliminary Study on Drilling of Reactive Powder Concrete. VII Congresso AIMAT, Ancona, 29 giugno-2 luglio 2004.

Boschetto A., Veniali F. (2004) Mass Finishing of Parts Produced by Direct Metal Selective Laser Sintering. 7th Biennial Conference on Engineering System Design and Analysis, Manchester, 19-22 luglio 2004.

Boschetto A., Veniali F. (2004) Wear of HFACVD Diamond Coated Tools in Turning of MMC. 7th Biennial Conference on Engineering System Design and Analysis, Manchester, 19-22 luglio 2004.

Libri I., Boschetto A,, Marchetti E., Ragnisco M.F., Ruggiero A., Veniali F. (2005) Friction sawing. VIII Congresso AITeM, Lecce, 8-10 settembre 2005.

Boschetto, Ruggiero A., Veniali F. (2005) A new experimental setup to assess the kinematics of the work-piece in barrel finishing. 8th A.I.Te.M. Conference, Lecce, 8-10 settembre 2005.

Boschetto A. (2005) Micro removal of material by barrel finishing. 8th A.I.Te.M. Conference, Lecce, 8-10 settembre 2005.

A. Boschetto, M. Barletta, “Evolution of morphological properties of metal components machined with an abrasive fluidized bed”, The 8th International ESAFORM Conference on Material Forming, Cluj-Napoca, Romania, 27-29 aprile 2004.

Boschetto, Ruggiero A., Veniali F. (2006). Corner shaping by barrel finishing. 8th Biennal ASME Conference on Engineering System Design and Analysis, Torino, 4-7 luglio 2006.

Boschetto A., La Barbera A., Colella C., Padella F., Ruggiero A., Veniali F. (2006) Particle tracking in horizontal ball milling. 8th Biennal ASME Conference on Engineering System Design and Analysis, Torino, Italy 2006.

Boschetto A., Ruggiero A., Veniali F. (2007) Deburring of sheet metal by barrel finishing. SHEMET’07, Palermo, 1-4 aprile 2007.

Boschetto A. (2008) Analisi del danneggiamento dei fori mediante analisi dell’immagine, Proceedings of Italia User Group Conference, Roma 26-28 novembre 2008.

Campana F., Boschetto A. (2010) Risultati preliminari di uno studio sulla qualifica delle tolleranze di additive manufacturing. In: V Giornata Nazionale Additive Layer Manufacturing & Reverse Engineering (AM&RE).

Broggiato G., Campana F., Santucci G., Boschetto A. (2010) Metodi di supporto allo sviluppo prodotto/processo attraverso l’uso combinato di Additive Manufacturing Technology e Reverse Engineering. In: I° Congresso Nazione Coordinamento della Meccanica.

Boschetto A., Gisario A., Veniali F. (2010) Evaluation and Classification of Hole Damage in Drilling Process of Reactive Powder Concrete (RPC) Using Neural Network Analysis. In: ICAM 2010. Kenting, Taiwan, February 2-5, 2010

Boschetto A., Veniali F., (2010) Intricate shape prototypes obtained by FDM. The 13th international ESAFORM conference on material forming. Brescia, april 7-9 2010.

Boschetto A. (2011) Ispessimento di superfici matematiche per la fabbricazione mediante tecniche di Additive Manufacuring, Mathematica Italia 5° User Group Meeting, 6-7 Ottobre 2011, Torino.

Boschetto A., Giordano V., Veniali F. (2011) Roughness prediction in fused deposition modeling. In: X Convegno Associazione Italiana Tecnologia Meccanica AITeM 12 -14 settembre 2011, Napoli.

Boschetto A., Campana F., Giordano V., Pilone D. (2012). Morphometric Analysis of Al Foams Produced Using Different Manufacturing Processes. In: 2° Congresso Nazionale del coordinamento della meccanica italiana. Ancona, 25-26 giugno 2012, ISBN/ISSN: 978889637860.

Boschetto A., Campana F., Germani M., Giordano V. (2012). Characterization of a Fused Deposition Modelling Process Through Geometric Tolerance Analysis. In: 2° Congresso Nazionale del coordinamento della meccanica italiana. Ancona, 25-26 Giugno, ISBN/ISSN: 9788896378601.

Boschetto A., Campana F., Giordano V., Pilone D. (2012). Morphological analysis of cellular materials by image analysis. In: Computational Modelling of Objects Represented in Images III: Fundamentals, Methods and Applications. Rome, 5-7 settembre 2012 Paolo Di Giamberardino; Daniela Iacoviello; João M, vol. unico, p. 391-396, ISBN/ISSN: 9780415621342

Boschetto A., Bottini L., Lettina F., Veniali F. (2013). Neural Network application to FDM surface roughness prediction. In XI convegno AITEM – Atti del convegno. San Benedetto Del Tronto 9-11 settembre 2013.

Boschetto A., Bottini L., Monarca F., Veniali F. (2013). Barrel finishing of FDM parts. In XI convegno AITEM – Atti del convegno. San Benedetto Del Tronto 9-11 settembre 2013.

Boschetto A., Consorti L., V. Giordano, Veniali F. (2013). Effects of thermal treatment on hardness of AA6082-T6. In XI convegno AITEM – Atti del convegno. San Benedetto Del Tronto 9-11 settembre 2013.

Giansanti D., Boschetto A., Pochini M., Giovagnoli M.R. (2013) Towards the design of a process for the image enhancement and improving in digital cytology, 6° Congresso Triennale SIAPEC-IAP, 26-30 ottobre 2013.

D. Giansanti, A. Boschetto, M. Pochini, L. Bottini and M: R. Giovagnoli. Snapshots in digital cytology: a feasibility study based on the software tool mathematica focused on the image-enhancement and improving. 6° Congresso Triennale SIAPEC-IAP, 26-30 ottobre 2013.

Boschetto A., Bottini L., Campana F., Consorti L., Pilone D. (2013). Morphological characteristics of aluminium foams produced by replication casting. In: XXII Convegno Nazionale IGF Roma 2013 - Atti del convegno. ISBN: 978-88-95940-47-2, Roma, 1 - 3 luglio 2013

Boschetto A., Bottini L., Lettina F., Monarca F. (2013). Applicazione delle reti neurali alla previsione della rugosità superficiale ottenibile tramite la fabbricazione additiva in Fused Deposition Modeling. In: Mathematica Italia User Group Meeting 2013 - Atti del Convegno. ISBN: 978-88-96810-03-3, Bologna, 30-31 maggio 2013.

Boschetto A., Bottini L. (2013). Analisi morfometrica delle schiume metalliche. In: Mathematica Italia User Group Meeting 2013 - Atti del Convegno. ISBN: 978-88-96810-03-3, Bologna, 30-31 maggio 2013

Boschetto A., Bottini L., Veniali F. (2014) Estimation of material removal by profilometer measurements in mass finishing. Key Engineering Materials Vols. 611-612 (2014) pp 615-622. 17th Esaform conference. Espoo 7-9 may 2014.

Boschetto A., Bottini L., Costanza G., Tata M.E., Quadrini F. (2014) Increasing performances of EN AB-46000 by squeeze casting. Key Engineering Materials Vols. 611-612 (2014) pp 629-636. 17th Esaform conference. Espoo 7-9 may 2014.

Boschetto A., Bottini L., Ruscitti R. (2014) Direct manufacturing of NACA profiles. In: III Coordinamento della meccanica italiana – Atti del convegno – Napoli, 30 giugno, 1 luglio 2014.

Bellusci M., Boschetto A., Bottini L., Padella F. (2014) Ricoprimento mediante tumbling mill per la fabbricazione di nanoparticelle magnetiche biocompatibili. In: III Coordinamento della meccanica italiana – Atti del convegno – Napoli, 30 giugno, 1 luglio 2014.

Boschetto A., Bottini. Integrazione della progettazione e della fabbricazione di componenti funzionali mediante Fused Deposition Modeling. In: Mathematica Italia User Group Meeting 2015 - Atti del Convegno. Napoli, 28-29 maggio 2015.

Boschetto Alberto, Bottini Luana, Veniali Francesco (2015). Experimental study of Fused Deposition Modeling parts interference fit. In: XII convegno AITEM – Atti del convegno. Palermo, 7-9 settembre 2015

Boschetto Alberto, Bottini Luana, Veniali Francesco (2015). Finishing of Fused Deposition Modeling parts by CNC machining. In: XII convegno AITEM – Atti del convegno. Palermo, 7-9 settembre 2015

A. Boschetto, M. Eugeni, L. Bottini, V. Cardini, G. Graterol Nisi, L. Pollice, P. Gaudenzi (2018). Introduction of Innovative Additive Manufacturing Technologies into the Nanosatellites Design and Realization. In: ASI – Israel Conference on Nanosatellites. Roma 9-10 Aprile 2018

A. Boschetto, L. Bottini, M. Eugeni, V. Cardini, G. Graterol Nisi, F. Veniali, P. Gaudenzi. Selective Laser Melting of a 1U CubeSat Structure. Design for Additive Manufacturing and Assembly. In 69th International Astronautical Congress (IAC), Bremen, Germany, 1-5 October 2018.

Boschetto A., Bottini L., Cioffi F., Veniali F. Abrasive wear evaluation of concrete pipe coatings through barrel finishing. In XIV convegno AITEM – Atti del convegno. Padova 9-11 settembre 2019.