ARTICLES
F. Aliaj and N. Syla, Influence of Al content and bias voltage on the microstructure of Ti1-xAlxN hard coatings, J. Eng. Appl. Sci., 6 (2010) 394-402, DOI: 10.3923/jeasci.2010.394.402.
N. Syla, Sh. Klinaku and F. Aliaj, Modeling of the precipitation layer by the method of finite elements during the process of gaseous nitriding of steel 16MnCr5, Res. J. Appl. Sci., 6 (2010) 444-450, DOI: 10.3923/rjasci.2010.444.450.
N. Syla and F. Aliaj, Modeling of simply supported steel bars under central concentrated static load, Res. J. of Appl. Sci., 6 (2011) 387-390, DOI: 10.3923/rjasci.2011.387.390 .
F. Aliaj, N. Syla, T. Dilo and S. Avdiaj, The effect of Aluminum on the microstructure and mechanical properties of arc-evaporated Ti1-xAlxN coatings deposited on cemented carbide substrates, Physica Macedonica, 61 (2012) 113-119.
F. Aliaj, N. Syla, S. Avdiaj and T. Dilo, Effect of bias voltage on the microstructure and mechanical properties of arc evaporated (Ti,Al)N hard coatings, Bull. Mater. Sci., 36 (2013) 429-435, DOI: 10.1007/s12034-013-0479-7.
N. Syla and F. Aliaj, Finite-Element modeling and experimental study of nitrogen concentration profile in 16MnCr5 gas nitrided steel, Sci. Res. Essays, 10 (2015) 615-623, DOI: 10.5897/SRE2015.6331.
N. Syla, F. Aliaj and B. Dalipi, “The law of growth of nitrided layer in 31CrMoV9 steel”, Acta Phys. Pol. A, 130 (2016) 83-86, DOI: 10.12693/APhysPolA.130.83.
F. Aliaj, N. Syla and A. Bytyqi-Damoni, “Refractive indices, densities and excess molar volumes of binary systems methanol+water and ethanol+water at T=293.15 K”, AKTET Journal of Institute Alb-Shkenca, 9 (2016) 36-42.
F. Aliaj, N. Syla, H. Oettel, and Teuta Dilo, “Thermal treatment in air of d.c. magnetron sputtered TiN coatings”, Sci. Res. and Essays, 11 (2016) 230-238, DOI: 10.5897/sre2016.6456.
S. Bekteshi, S. Kabashi, S. Ahmetaj, B. Xhafa, G. Hodolli, S. Kadiri, F. Aliaj, and Bujar Abdullahu, “Radon concentrations and exposure levels in Trepça underground mine: A comparative study”, J. Cleaner Prod., 155 (2017) 198-203. DOI: 10.1016/j.jclepro.2016.10.131.
N. Syla, F. Aliaj and M. Rama, “Hardness curves for steel 31CrMoV9 after gas nitriding”, Acta Phys. Pol. A, 312 (2017) 484-486. DOI: 10.12693/APhysPolA.132.484.
F. Rr. Aliaj, N. Syla, H. Oettel and T. Dilo, Thickness determination of TiN and TiAl coatings on steel substrates using X-ray diffraction method and their composition measurements by GD-OES, Surf. Interface Anal., 49 (2017) 1135-1141. DOI: 10.1002/sia.6292.
F. Aliaj, N. Syla, Z. Tolaj, A. Zeqiraj, and A. Bytyqi-Damoni; Refractometric behavior of ternary liquid mixtures of cyclohexene, ethanol and acetone at four different temperatures, KPS - J. Phys. Appl., 1 (2017) 71-77.
N. Syla, F. Aliaj, Z. Tolaj, N. Mahmudi and A. Zeqiraj, The gas nitriding behavior of 31CrMoV9 grade steel, J. Eng. Appl. Sci., 13 (2018) 6713-6718.
N. Mahmudi, N. Syla, S. Rendevski and F. Aliaj, Swelling and mechanical properties of polyacrylamide based hydrogels prepared by radiation induced polymerization, J. Eng. Appl. Sci., 13 (2018) 7205-7209.
N. Mahmudi, N. Syla, F. Aliaj, S. Rendevski; Correlation between hardness and elastic properties of acrylamide based hydrogels prepared by radiation induced polymerization, Journal of Natural Sciences and Mathematics of UT, 3 (2018) 232-237.
N. Syla, F. Aliaj, Nj. Elezaj, B. Dalipi, Comparison of Experimental Curves of Alloy Steels after Gas Nitriding, International Journal of Computational and Experimental Science and Engineering 7 (2018) 46-49, DOI: https://doi.org/10.22399/ijcesen.798206
N. Mahmudi, N. Syla, F. Aliaj, S. Rendevski; Correlation between hardness and elastic properties of acrylamide based hydrogels prepared by radiation induced polymerization, Journal of Natural Sciences and Mathematics of UT 3 (2018) 232-237
N. Syla, Nj. Elezaj, F. Aliaj, Z. Tolaj, A. Zeqiraj; Finite element modeling of 31CrMoV9 steel hardness curves after gas nitriding, Indian Journal of Chemical Technology, 26 (2019) 358-361.
F. Aliaj, N. Syla, A. Kurtishaj, N. Elezaj, Z. Tolaj, T. Arbneshi, A. Zeqiraj; Densities, refractive indices, and derived properties of binary mixtures of ethanol with benzene and pyridine at various temperatures under atmospheric pressure, Int. J Thermophys., 41 (4) (2020). DOI: https://doi.org/10.1007/s10765-020-02632-9.
F. Aliaj, A. Gjevori, N. Syla, N. Elezaj, B. Ziberi, B. Dalipi; Physical Properties of the Binary Mixtures of Ethanol + Benzene and Ethanol + Pyridine at Five Temperatures under Atmospheric Pressure, Acta Physica Polonica A, 137 (2020) 465-472.
B. Dalipi, N. Syla, F. Aliaj; Electron Temperature Fluctuations on the Eve and after NEIAL Events Observed with the EISCAT Svalbard Radar, Acta Physica Polonica A, 137 (2020) 509-512.
N. Syla, B. Dalipi, Nj. Elezaj, F. Aliaj, Z. Tolaj, A. Zeqiraj; Finite-element modeling of the N concentration profile in 31CrMoV9 steel after gas nitriding, Emerging Materials Research 9 (2) (2020). DOI: https://doi.org/10.1680/jemmr.18.00154
F. Aliaj, N. Syla, E. Vatovci, T. Arbneshi, and B. Dalipi; Densities and Viscosities of Mixtures containing water, methanol and ethanol, Emerging Materials Research 11 (1) (2021) 141-146. DOI: https://doi.org/10.1680/jemmr.21.00090
N. Syla, F. Aliaj, B. Dalipi, Nj. Elezaj, A. Zeqiraj, The depth of the diffusion of nitrogen in 16MnCr5 steel after gas nitriding, Emerging Materials Research 11 (1) (2021) 138-140. DOI: https://doi.org/10.1680/jemmr.21.00086
T. Arbneshi, A. Qerimi, A. Zeqiraj, N. Syla, and F. Rr. Aliaj, Densities and sound speeds of ternary mixtures methyl tert-butyl ether + toluene + n-hexane (or cyclohexane) and their binary subsystems at temperature 298.15 K and ambient pressure, 67 (2022) 2098-2107. DOI: 10.1021/acs.jced.2c00093