This was a fun project to make. First I shaped the bowl, then I added a stand at the bottom of my pot so it wont fall over. Next I added color to my pot. We finished by putting the pots in a hot kiln. Overall I enjoyed doing this project. 

I had a good time making this project. First I got clay and used a a plastic plate to shape the clay into a plate.  After I picked out a color, and painted the plate. Then after it was dry I got the sketch and traced the sketch in the middle of the plate. Next I carved out what I outlined. Lastly I put one coat of the glaze so that it can be smooth. My favorite thing about my plate is the color I picked. Overall I enjoyed doing this project 

This project was challenging but I learned a lot from this project. I first had to measure out the walls and the floor. Then I glued the walls on the floor and added a coral of clay to secure the walls. I added the lid and added the texture on the walls and the lid. I added legs to the bottom of the box so it can stand. One thing I would do differently is the walls, I would do different measurements so the walls can come out to be even.  Overall I thought this project was fun, and I learned a lot from this project. 

Coming into this project I was nervous about starting this. Once I kept on practicing I finally got the hang of it. I learned that it works better when you have a lot of water on your hands, and when the speed of the wheel is going fast. The hardest part was centering the clay. I enjoyed doing this project and I would do this again.