I like this maze because its hard and easy at the same time and i like that its kinda confusing and i like confusing maz
I really like the orange color and i really wanna make something like this in my maze design but i dont want to because the balls might get stuck.
I really like the easter designs and i like the colors so much but got confused if it was a maze design or not and i dont wanna make this because this not easter yet.
I think that kids will really like this design and the colors are so pretty.
This one was made out of wood but i think this one is made just for kids like us.
This one is for 4-7 year olds i think because it dosent look that complicated and the colors are pastel colors that kids might like.
This one is a garden type of maze again! This one is accually quite complicated and its some type of piggy bank too.
This one is flat and garden maze but the thing i like about this one is that it is very different from the other garden mazes and i dont know why it looks different for me.
These ones are too close to each other so people might be confused on which comment is on which one.
These are my posters layers and as you can see it has lot of layers and comments.
This one is the tools in procreate. Its the wrench button and when you click it, it should open something like this.
This is the duplicated one in procreate this one is also finished.
So a disaster happened and as you can see here, this is the 19 maxed poster. When i try to add some more layer, this shows up so i will need to duplicate it.
These are my layers for the duplicated poster and it only has three layers but it is done.
This one is the bottom view of the tinkercad thing
This is a sideways screenshot of tinkercad thing
This is another sideways view of tinkercad thing
This is the front view of tinkercad thing
These are the 4 boxes i made and i accidentally started my design before making the 3 more boxes.
This is my first finished design. But i think i pressed the ghostlines a little too hard and its a little bit dark.
This is the finelined finished one! I forgot to screen shot the other ones because i was hurring too much.
I made one mistake while finelining this one for example, i accidently conected the outer line with the maze designs.
A green cup holder which when you are gonna play the game the cup is meant to hold the balls
This is the spinning thing which goes round and round and flings the balls
Orange! The main color.
This is my first finished one! I decided to render the second one first because for me it looks pretty easy to color. I also placed the colors i used on the place i used the colors
As you can see, here this is the same one but without the colors placed. I also kinda like this one!
Yet again, I placed the colors on the place i used them just like my previous one.
This is also the top side view again! I like this design the most because it not that very plain and simple.
This yellow thing is a cup to hold the balls and i have one more cup but i didnt screen shot it because it was little too big.
This one is also a spinning thing but this one is a different one the previous one spins and goes round while this one flicks the balls.
Here’s the other cup that I said that there wont be space because it was big but i tried fitting it as much as i can and it was still okay and still fits.
I tried using blue colors such as dark blue,light blue and more.
Top view again! I really like this design but i dont wanna use it because its too simple and easy to score.
This is my last design. I used greenish colors to match plants and nature because trees and other things make us live.
This is also the top view and as you can see here the the green is so pretty!
This is my first comment! I did it with my least favorite design. I wrote about what i like about this and why i dont like this. I made this a little too light so when i'm done with all coments, then i will fineline.
Yet again, this is light hand righting and small writing but i will fineline it so it will be darker and more see able.
I accidently made it kinda dark and also the fourth one but i was hurring so i could fineline quicker so i made both of them a little bit dark.
I wrote the comments bigger because the design was very small that it could fit in my palm. Also i mentioned in my third comment that i wrote this darker than all of the person.
This is the finished finelined one. As you can see here, its kinda small but if you see this inperson then this will be kinda midium sized. I dont know how to call its big and small at the same time.
This is the full comment page. I wanted to show the full comment because last time i didnt show it because it was light.
This my first comment. As you can see, its a very short comment.
This is also a short comment.You can read both of these comments.
Personaly, i think that these two are the ones i like the most because the blue one has pretty colors and i like blue but i dont really wanna choose this one the colors are just pretty. I like the first one too because its big and designs are good enough.
This is the second one. These are all the comments in the second one. I made the comments i wrote small myself because i only made it in one place but i was deciding to make more comments in my paper ideas but i didnt so these are the full comments but i wanted to write it in only 1 place because i dont have to crop alot.
I just put the comments like this because i only wrote this in one place and i wrote it a bit more bigger because i didnt want to say anything much.
As you can see, I screen shoted only one because i wrote it bigger and i also cropped it so i dont have to put more photos.
She likes it because she thinks it looks cute and she said if you flip it, the spinner looks like a dead body.
Chloe thinks that the first deisgn look the best and i agree with her! She likes it because its big and its not too plain and not too easy.
She likes it because she said it looks like an avacado and i dont really know what she said after that.
She said it looks like blue duolingo so i think she liked this too because she said she liked these both ones.
She liked this one because she said it looks like an avacodo and i dont really know if she said i like to eat avacodos but i think it was havarnah and i decided to use the one without comments because i dont wanna crop it.
She said she liked it because it looks like an avocado just like Elizabeth but as i said she said she liked to eat avocados and i also didnt crop this one too.
She liked this one because its green and it is one of her favorite colors and it looks like an avocado and i also used the one without comments.
Mr Douglas likes this one because the rendering is good and the shapes are nice and theres a moving part that flicks it.
As you can see, I finished my card model test. I didnt screen shot the steps to making this card model because i forgot.
When i was cutting the card to make a card, I accidently cut the edge of my paper but good thing that it didnt go onto my design.
When i was cutting the rectangle for my card model test, I cut the rectangle too light so i had to cut more and i got this.
Finally! done finelining. I can finally cut the design and i just need to cut the second wall and color my red base and then i will be done.
I made this cup a little too small and it might get stuck so in the real design, i will make it wider and bigger.
I am finally done cutting but i have to cut the out line too so i will need to cut the outline now.
This is my base for the red color and that was why i didnt color the test model card.
I am finally done cutting everthing but i just need my base cutted and rendered. This part of cutting was also very hard because i was pressing my cutting knife not really hard and i kinda cut over the finelined line. I also had to push the line out so it was risky because it might rip.
I want to make this bigger and wider because the one on the left is too short and the right one is too long so it will be too hard and as i said, it might be too
For this, I did a top view and a color placement to see if they are similar and i think its not that similer because for my card model test, I made the stuff too small and the design, a little bigger and i forgot to add, i accually made this in procreate so this is maybe a mini poster.
I have finished coloring the base! I think i colored it a little messy what do you guys think??
I have finished cutting and i just gotta stickit with glue and test it and then i will be done!
I forgot to show how to hold the knife on top so i have to the chance to show how to hold it.
I am finished cutting and glueing! I just need to test it and i think it wont get stuff but it might get stuck.
As you can see, the color is NOT the same because its darker but i think the design looks kinda the same do you think?
This is the only design without the original design and it looks kinda weird for me because the shape is more round.
Firstly,I want to make this a little bigger and less pointy
Next up, i want to make the bar a little bigger or thicker because its a little too small
I know my circles are bad but lastly, I want to change shape because its a little weird and i dont know how to explain it
the wideness has to be 115 wide but it can be less but not more than 115
It has to be 150 but it can be less but not more like i said
As you can see, this is step one. To make step one, just draw your shape design like mine
This is step two, its really easy, just duplicate the shape and put it up. also make it about 10 tall or 5 tall
Step three is also kinda easy, just edit the duplicated one and draw your design
For step four we are doing pins. grab the kind of invisable cylinder and make it taller than the design and make it 5x5
This is the last step, you can duplicate only 3 but as you can see i duplicated 4 and cant be more than that. also you need eight so duplicate it and i will show what to do next
We had to change the kind of invisable cylinder into a 4x4 because Mr Douglas was wrong about 5x5
Next, you need to group them together and then connect the shapes together
After connecting the shapes together, you should have something like this but incase your wondering, why do i still have the cylinder, its because you need to duplicate it like i said already
Now just do the same but shape the bottom because at first we have to click the upper one
As you can see, I made a hole in the spinning thing but you needed to make space to drill the hole out
I am going to be trying colors i havent tried and some that i dont really like. By the way this is my original colors they are red and orange
This color is blue and dark blue. For me the color kind of looks neon for me but for you it might not really and it looks like the night sky
As you can see this is yellow and orange, some of my least favorite colors and it kinda looks like i'm trying to make something like a lemon
The light purple is lavender if you dont know and somehow the lavender looks good but the pink looks a little odd and the pink kinda gives me strawberry vibes
This one is brown and cream, and the colors look like chocolate and bread maybe?
The mint kinda looks cool but the blue just makes the mint look kinda odd but all of the colors i tried it looked worse so i made it blue and mint instead of looking for more
This one looks pretty cool but looks kind of like sad colors or something like a couch color type of thingy.
I also did green and mint becuase i want to fill my colors part and i want 10 pictures, not 9
This is crimson if you dont know. I really like the grey and crimson together but the crimson is just too dark and the grey just fits it but looks a little odd
I like the purple in this but i dont really like the dark blue or dark purple that mixed in and its a little dark and reminds me of a nightmare
If you noticed this about my cup holder then you might have good eyes, so i changed the cup holder into a little thiner and smaller because i think this cup might be really thick in the real design so i changed it and i was thinking if i should make it taller now
She says that she likes it because she thinks that the pink matches really well with the lavender.
She says she likes this because its plain and also the colors are similer.
She says she likes it because the colors blends in together and her favorite colors are mint and blue.
This step is easy because all you need to do is lock it so it dosent slip and just check the holes if its perfect. I forgot a screenshot of my holes but im explining it to you so you know
Now after checking, Just unlock them and line them like mine, this one is also easy.
Next one is kinda easy but if you do something wrong then you cant have your maze project all you need to do is just leave it alone if you want but i put it down. You dont need to put it down but i did it for safety. and if you its over the platform then its wrong.
For the most easy and simple step is accually the last step which is exporting which may sound hard but is easy. Firstly click the export button on the right corner and click SVG becuase we are lasercutting and next step, just wait for a bit and then click download, super easy.
Before exporting, we to write this on our design name before exporting i forgot why but just dont forgot to do it
I forgot to show what to click but go we needed to go to google classroom and click on the new asignment and click upload, you will see (Your name).(Classroom).Maze click that one and hand in.
As you can see, this is a whote thing but its not what you think, its my svg file and if you click yours, you will be able to see your design but very light and if ur design only has one part then its wrong.
This is my lasercut maze design! As you can see i put them in place together and if you lift it up there will be your svg file and you needed your svg file because you needed to know where your designs went.
This is my spinning thing or part and as you see theres no hole yet but there will be a hole soon after i lasercut.
This is the lasercutted design without the pieces and stuff and as i explained already that was similer to the svg file and also we needed this so we dont get confused.
This is my full pieces and it looks pretty good and it also looks like
I dont really know what happened here but if you are wondering is this one of my deisigns what snapped its accutually not its just a useless piece that we dont need.
As you can see this is the snapped part and i tried to find the other piece but it was nowhere to be found so thats all i found.
As you can see here i found another piece
As you can see ther you think this is another layer but it is accually correct but this is also fake glass but is accually plastic.
This piece is a little too thick but its still okay and good enough
If you are asking why i am using the same photo, I forgot to say that the fake glass is accually called acylic plastic.
As you can see this is not mine, and if recognized this, this is chloes and i took a picture and i was in a hurry and it is quite blurry
This is my favorite part and i like it becuase of the cup conecting to the outer line.
I was way too hurring because mr douglas said 22 pictures and i only had 15 or something else. and this is her design without the outer line.
This is her design zoomed in. I feel like theres nothing much when you remove the outer line but i like her swiggly line the most.
As you can see i switched designs again but this is elizabeths and hers is a house. I really like her house idea and the sqaure cup.
As you can see this is one of her parts and it is a cloud but theres nothing that special about it but the design and idea of the clouds are pretty good.
I dont have a screen shot of the outer line and designs of her maze, because i was hurring alot because i was scared if i take my time it will be slow and get 0 marks for the assignment
This is maries maze, As you can see its really wide and i kinda like her design but not really becuase she made her design wide.
This is her design without her outerline and for je it looks kinda weird but maybe not for you.
This is my procreate poster! By the way this is explaining how to make a maze in Tinkercad and this is my Tinkercad design so its not anybody elses and i only got to step 3. I'm not sure if we will continue it or not but i think if we have time we might continue it.
This is not mine but this is acctually mr douglas's one of a sample. As you can see here he is blending the colors and i wanted to do that but he said its hard because you might bleed it and tou cant cover it.
These are the colors! As you can see there are many colors and the picture is small but i want it to show all the colors.
This is not my deisgn so this is chloes and i cant take a picture of mine because our fingers are stained and out ipad will get messy.
As you can see this is not mine again. And i was screenshoting random peoples work so i am sorry if this is yours.
This looks like a mango and i dont know why i kind of like it but its pretty small and it reminds me of my design that everyone called it an avocado.
There! This is my finished stained wood! As you might be wondering that why i didnt screenshot myself dying it and like i said we had dirty fingers so yeah.
As you can see here, i accidently put a little red and i tried to cover it with more orange and i needed more orange anyways and it didnt go out so i kept it in but its not that noticable so I'm okay.
As you can see, i explained this piece before but you might have not seen this piece in the wood staining. You might think we need this piece but we accually dont need it it was just scrap. Also we dont need this because we wouldnt have room to movethe ball (by the way this is chloe's idea.)
This is my finished stained design! I really like the red because it kinda looks like crimson red which is one of my favorite red color. i dont really like the orange because it looks like yellow way too much and when i said i made a mistake about putting red, and i tried to cober it, it was accually because of the orange colors looking way too yellowy.
I think that the promblem about yellow is because the red color accidently touched the yellow cup but luckily it didnt bleed. also one of the reasons why there is a problem in this is because of the black stain or line. I have to idea why there was a black line because i didnt use the color black so maybe it was someone else.
This is minnies and not mine and i put a picture of minnies because i'm comparing if these look like mine and minnie's does not look like mine because of the colors and the giant size.
As you can see this is lauras and the colors are kinda close but the orange or yellow is kinda dark compared to mine also if the eye was brown then it would be close and if the yellow or orange was lighter than it will be very close,
As you can see this is veda's maze and it looks very similer to my maze design but she was just missing the red color and i think her maze design is a toast? maybe? i think so.
Overall i think veda's deisgn is most similer to mine and i love the design. Also i think if she changed the brown closed eyes and change it to yellow or orange, then it would be more similer.
I like Laura's not becuase its a pokemon but because of her design, colors and the details i just like it because it looks like she spent all her time making this one and i would like it more if she made the nose orange and make the dark orange or yellow broght yellow.
This is the glue on the counter that we will be using to glue our maze design later and i'm gonna go stick it together later or next lesson.
This is some people glueing their maze together and this is chloe pressing her maze parts together.
This is also some people glueing and this is jenna sticking her outer line or something.
This is my finished glued thing. i forgot to explain the parts of glueing because id dint have the pictures so i just had to take a picture of this.
This one is wiht the spinning part and i think it looks okay and kinda good but i wanna skip to asembling it already.
Thsi one is my spinnign part and as you can see, there is no color because i took the picture in an angle that you cant see the color so thats why.
Thsi one you can see a bit of color and its brown and maybe you remember that i didnt change the color from the wood staining and thats probably noticable.
This si the glass i showed you earlier and today we are gonna put it on the design now! and i think this might be a alittle hard because we have to get like a rubber band thing and press it down.
This was the rubber band thingy i was talking about. As you can see, there is no rubber band but because i forgot to take a picture of the rubber band thingy, and i already pressed it so that was the only picture i had.
This si my finished asembled maze! i really like it and i thought it was gonna be hard but it was accually easy!
This is where we are gonna take our picture for our poster! As you can see, this is a box but its called a light box but the light is not open yet so it might look like a normal box.
This is what i took! and it looks clear enough to see but theres a bit of shdow on the bottom but its still okay. It might look edited but i accually took this in the first try.
This is my poster and i only did i little bit but its because we only got to do this much so we are kinda basiclly done with this stage.
This is my paper for the measurements of the box! You might wonder why i wrote numbers on the paper and its because i forgot to take a picture of the one without numbers so the numbers are for the sticks.
As you can see this is the machine we are gonna use and this is called a scroll saw and this machine is used to drill and cut wood through the wood to make the box.
This is the button to stop and start it if you dont know. open it up and click the green button to start it and red to stop it.
Also, i forgot to mention, that you have to click the green button before using the wood cutter.
This is the hat we need to wear before we use the machine! and i think it looks the helmet that we would wear when we use a chainsaw or something.
As you can see, This is my wood base for the top and bottom and i forgot to show you the other stuff but i made a mistake because i accidentally cut extra pieces out but Mr.Douglas told me to check it first so im gonna make the wood sides
This is the mistake but clearer to see and i compared them to see whohc one is smaller and thicker and to show it clearly.
These are my wood planks but i forgot to show that i sanded it and i think that the box willbe too small for my design so i will check it
This is my new wood base for the top and the bottom and i think that its going together better now! And i also forgot to show you how i make it!
This is my wood sides for the wood base and i also think that its coming together and yet again i forgot how to make it.
This is my box all together and we have to glue the top later but theres a few glue on the side but its okay because the glue will turn clear anyway.
As you can see, this is my box that has a top and i think that my box is a little thick but we will slcie the thick part off anywa so its okay on how long or thick the wood on the side is.
I forgot so many stuff today but i forgot to show you guys my second box that i made a mistake on! And you might be wondering why im making a box that i made a mistake on its because that i am taking this one home to keep jewelry or something else so i am basicaclly just making another box and i also forgot to show me checking the box but its too late!
I forgot to show you guys the masking tape step and your probably wondering why put tape when your done gluong and its because the tape helps keep the glued box sealed.
This is my box and i am waiting for it to dry and usually tall boxes will have the clips which are called claps on top because when we put it in the vice, it will only press the bottom and the claps will help press it together which if theres an extra space the box wont go together and the claps help the box stay together.
This is my short one as you can see and theres no claps on them because its short and not tall.
If your wondering, i am NOT painting yet and this is just some paint to help the resin stay light and if you dont use this paint the resin is gonna go dark and not clear because of the dark wood.
I think that this one is the big one because of the size and you have to make it smooth or it will have a bump and it will stay like that so i think mine is smooth enough.
I guess same explanation but this one is the smaller one and i can tell by the cut down on the bottom and its uneven.
As you cna see here, this is a bump but there is a solution to fix it and its easy but i think the solution might take some time but i just need to sand it and its gone
Same explanation over here but just forgot to say that the bumps were on the big box.
As you can see here, this is my inner wall and we are not using this yet until we pour our resin and its because we are going to slice our box out after the resin and also the inner wall and i didnt do my smaller box yet because i wanna move on the resin first.
Thse are the colors for the resin and as you cna see there is alot but soem are powders and some are paint and we need powder so some of the colors that you might want will be paint which you cant use.
This is the stick to mix the colors so it wont get hard and the sticks are kind of dirty but if we mix the already used barbeque sticks, the color wont change so its no problem.
This is accually the resin which looks kind of like rotton milk but if you accually have to put the powder in to make it colorful but if you dont put any color in, it will be clear and see throguh and the resin is also really sticky.
This is my colored box but i forgot to show you the not sliced one im so forgetful! but i think that the mixing colour i tried failed because the mixed color isnt really straight and i also forgot to show you the machine that i used to sand the edges.
This is the sliced box that Mr.Douglas sliced open for me and this is where were goign to put our maze deisgn inside.
This is the sand paper that were going to use to sand the edges to make e edges smooth.
Thsi is my inner walls and as you can see, its already sliced and i forgot to show you the slicing and i forgot to show the slicing for the both of the boxes but this is my first box (the small box.)
These are my two boxes and i didnt really show the reson in this picture but my first box (smaller one) is on the right and the bigger one is on the left and also i already did the foam for both
You might know which box this is because of the resin for the smaller one on top but this is my small box which is also my first one and i actually have to take home both.
this is my second box whoch my bigger one that i also have to take home but my favorite is this one. And the only reason i chose orange is because it could match my design and the box.
This is a little farm i made in my free time on the last lesson and there are tickets chicken s and horses but theres no cows because theres not much spaceto add anything else but this took me about half the lesson to make.