CAM Wizard Tutorials
WPI is in the Process of moving all of the ESPRIT video tutorials to a new server. All of the videos should be fully transferred in the next few weeks.
Mill - 1 - Creating Geometry (01:39:58)
Mill - 2 - Features & Tools (01:58:07)
Mill - 3 - Operations (03:19:38)
Mill - 4 - Fixture & Final Operations (01:03:27)
Turn - 1 - Geometry & Features (02:28:55)
Turn - 2 - Machine Setup & Tools (01:00:02)
Turn - 3 - Operations (02:28:45)
Turn - 4 - Break Corners & Templates (00:18:13)
5 Axis - 1 - Swarf Introduction & Machine Setup (01:03:22)
5 Axis - 2 - Swarf Exercises (01:53:06)
5 Axis - 3 - Contouring & Composite (01:06:46)
5 Axis - 4 - Composite (01:16:19)
5 Axis - 5 - Impeller Milling (00:29:45)
5 Axis - 6 - Continuous B-Axis Contouring (00:32:12)
Millturn - 1 - Work Planes (00:56:13)
Millturn - 2 - Machine Setup (00:52:03)
Millturn - 3 - Synchronization (01:50:54)
Millturn - 4 - Part Example (03:00:57)
Millturn - 5 - Part Example 2 (02:35:04)
Millturn - 6 - Part Example 3 (02:08:06)
Note:
In order to access these videos, you must be on the WPI network or VPN.