09.) BLOG POST: FUSION 360 PRACTICE
Post date: Mar 09, 2018 8:41:2 AM
Assignment:
Assigned:
Due:
BLOG POST: FUSION 360 PRACTICE
Friday March 9
Friday March 16
Description:
Before we begin creating original designs in Autodesk Fusion 360, we need to master it's drawing tools. That means we need some practice!
Re-create the drawings from the Technical Drawings problem set, then upload your results to your process blog (as screenshots).
Requirements:
1.) Re-create each part in this problem set by adding features based on the 2-D sketches you create in Autodesk Fusion 360.
2.) Take notice of dimensions and implied constraints/relations in each drawing.
3.) Take screenshots of the 2D sketch for each model, as well as the final 3D product, then upload to a NEW POST on your process blog.
4.) All geometry must be fully defined! (i.e. no magenta lines)