RCX400
Known issues on RCX400/LX400 line.
Hot swap of handcontroller to telescope rear panel not possible - Handcontroller will lit but no carracters visible.
No solution available at this moment (Okt 2011) - replacement of print possible only solution.
Scope will not find home position - Scope keeps leveling.
Lint cable from level sensor broke 1 wire - replace lint cable.
Dec motor stuck
Caused by tightening the manual knob
RA motor stalls when connected to USB.
Possible caused by low power supply. (min 5 a 6 Amp's)
Focuser / collimating issues -
2 types:
Power issue - cuurent draw is high for this scope use at least 12 VDC and 10Amp capable supply.
Focuser motor defect. - analyses will follow.
Sudden restart or RA motor stall - most of the time caused by power supply when using telescope with USB hube to computer. 10 Amp minimum.
DEC backlash values. Reported sometimes to be more than 200%. Mine is set to 100%. so backlash is evident in this scope.
Investigated the worm gear but no play here. Backlash seems to sit in the gearbox of the DC motor. No solution available right now.