1.Go to Simulation mode
2.Go to website on PC udptcpexample.com
3.Click Go
4.Click Play
5.Analyze the packets
1.Simulation mode
2.Edit filters - Checkmark only TCP
3.Web Browser type 192.168.1.2
4.Click Go
5.Click Play
6.Analyze the packets
1.Simulate mode
2.edit filters - Checkmark only UDP
3.Web Browser on Pc type updtcpexample.com
4.Click Go
5.Auto Play
6.Analyze Packets
1.Connect the server with a crossover cable.
2.Power on the Server
3. Config the Server with IP Address 192.168.254.254, Subnet Mask 255.255.255.0, Default Gateway 192.168.254.253, DNS enabled, with the association of "eagle-server.example.com" (without the quotes) with the server's IP address, HTTP enabled
4.Connect PC1A to the switch with an ethernet cable
5.Configure it with the following settings: IP Address 172.16.1.1, Subnet Mask 255.255.0.0, Default Gateway 172.16.255.254, and DNS Server 192.168.254.254
6.Send a packet and then double click the Fire to force the Packet through
7.Analyze the packets
1.Simulate a packet across switches
2.Simulate a packet across the router
3.Analyze the results
1.Send a Packet from PC A to PC B
2.Anaylze packets and routing table
3.Send Paclet from PC C to PC A.
4.Anaylze packets and routing table
1.Run simulation
2.Analyze OSI model and Packets between routers
Â