1.Simulation
2.Edit filters DNS, HTTP
3.Click PC
4.Then the Desktop tab,
5.Go to Browser
6.Type in www.example.com
7.Click Go
8.Analyze the Packets
1.Click on the Server
2.Go to the Services tab
3.go to Dns
4.Turn on DNS
5.Type in the DNS server www.example.com and the IP address 192.168.1.254
6.Click Add
7.Turn on HTTP
8.Open the PC
9.Under Config type in the IP address 192.168.1.254 (Or do this under desktop IP Configuration)
10.Go to Realtime mode
11.Double click PC
12.On Desktop, Open the command prompt and ping 192.168.1.254
12.Open the Web browser and type in www.example.com
13.Click go.
1.Add a End device PC -click on it
2.Go to config to change the name to 1B
3.Go to desktop IP Configuration to update the IP address, DNS, and gateway addresses
4.Connect the PC to the S1-Central switch Using an Ethernet cord
5.Connect the Server to R1-ISP with a crossover cable.
6.Configure the Server by turning on the DNS server and Http server under the Services tab
7.Type in the eagle-server.example.com and put in the IP address given and click add.
8. Now you can send a packet in the simulate mode. Once you try to send a packet double click the icon under the fire tab to get the packets through.
1.Go to Simulation mode
2.Go to website on PC udptcpexample.com
3.Click Go
4.Click Play
5.Analyze the packets
1.Simulation mode
2.Edit filters - Checkmark only TCP
3.Web Browser type 192.168.1.2
4.Click Go
5.Click Play
6.Analyze the packets