Turvey Stalking - Lumley Arms

Scroll down for Titanium bolt handles from Boltknobs.com

Titanium Bolt Shroud

**Currently unavailable - until further notice**

- fits T3, 590, 595, 690 and 695

CNC machined from aerospace Grade 5 titanium alloy (Ti6Al4V). At only 25 grams, our shrouds are close to half the weight of comparable steel shrouds,

yet significantly harder than the best aluminium alloy shrouds on the market.

We mill a flat on top of the shroud body and cut in a diamond chequering pattern to mimic the style of the shrouds seen on the bolts of the more expensive Sako line of rifles.

Available in a natural finish (to match stainless rifles) or for blued / phosphated Tikka rifles, we offer a very tough DLC coating which produces a dark matte charcoal colour to blend in with the colour of the Tikka receiver.

This is a tough industrial finish. Please note the DLC coated shrouds have a slight brown 'patina' on the inside bore (invisible once assembled) - this is a result of the coating process interacting with remnant cutting oil - it does not impact the performance nor is it corrosive.

We include a small coil spring which removes all slack between shroud body and the firing pin assembly of your bolt from a necessary tolerance deliberately designed into the shroud to ensure 100% anti-bind function in all rifles.

Construction:

- CNC Machined from high grade aerospace titanium alloy

- Polished then glass bead blasted to a satin finish

-Diamond pattern cut onto the top of the shroud body

- Available in a matte black DLC coating for Tikka rifles with a factory hot blue or phosphated finish.

T3 Bolt Shroud, Natural colour. £91 (inclusive of post and VAT in UK)*

T3 Bolt Shroud, DLC coated. £91 (inclusive of post and VAT in UK)*

T3 Trigger Spring Kit

Ultra light trigger pull spring (1 pound)

(fits Tikka T3 / T3x , Sako 75, 85 and A7)

This kit includes 3 trigger springs with the option of selecting either 3x ultralight springs (all the same) or an ultralight, light and medium (1 of each). These springs will replace your original Tikka T1x, T3, T3x and Sako 75, 85, A7 trigger spring and achieve a range of pull weights starting at 1lb which is repeatable, safe and breaks cleanly every time. This is compared to the factory spring which achieves at best 2lbs when adjusted to the minimum safe setting.

Made from quality spring steel wire and plated for both easy identification and to maximise corrosion resistance. Our ultralight springs break cleanly and consistently at the listed pull weights* when installed correctly**. Further improvements are possible by polishing the internal trigger components with varying grits of rouge compounds on a sisal wheel / buff.

Ultralight ~1lb (gold colour)
Light ~1.5lb (silver colour)
Medium ~2lb (black colour)

* Results may vary slightly between individual rifles and trigger pull gauges. Our pull weight was achieved repeatedly with the grub screw fully extended. Measured using an RCBS gauge and thoroughly tested.

** We supply replacement springs only. If unsure on installation, we highly recommend having a qualified and competent gunsmith do the job. Slight variations between different rifles may result in an unsafe trigger when fitting these springs. Always ensure the rifle is unloaded before commencing work and test trigger function extensively upon reassembly whilst rifle is unloaded. Slam closing the bolt and dropping the rifle onto the butt-pad (both whilst unloaded) is recommended. Adjust the grub screw until a safe trigger is achieved.

£15 including VAT & Delivery

New Factory Mag bottom metal

DBM for T3 / T3x pattern magazines (Tikka T3 / T3x only - not CTR compatible)

Available in Natural or Black

Finally - a high quality bottom metal replacement for the original plastic version at a very competitive price. Fully CNC-machined from a mix of high-grade titanium and aluminium alloys with absolutely no cheap 6000 series aluminium alloy used anywhere. The development of this bottom metal replaces the last chunk of plastic that comes with the factory rifle. This results in a very strong, lightweight and corrosion resistant product - providing the perfect bedding platform for your T3 or T3x rifle (bedding pillars and hex-head action screws included).

~UK Special Price~

£114 inc vat and delivery

Tikka T3 Titanium Lug Bedding Kit. £48 (inclusive of post and VAT in UK)*

Includes the Stainless pillars and screws.

(No bedding compound included)

Youtube; Fitting bolt shrouds and handles

If you have any technical queries, please contact boltknobs.com directly - sales@boltknobs.com

Tikka T3 Titanium bolt handle with Carbon fibre knob.

Tikka 590 / 595 / 690 / 695 Titanium bolt handle with Carbon fibre knob.

£59 (inclusive of post and VAT in UK)*

The handles are manufactured from grade 5 aerospace titanium alloy (which may require some fitting*), and the knobs are moulded

from genuine 3K carbon fibre (not some imitation stencil or film).

*If the handle does not fit without force (it is a sliding fit) please take to a qualified gunsmith to have the handle fitted.

~Please be aware that damaging the bolt handle will not qualify for a refund~

Request Straight or swept back for Right Hand or Left Hand action when ordering (please send an email to confirm!)

The handle can also be bead blasted if required.

Review of the 590 / 595 / 690 / 695 Bolt shroud and Titanium bolt handle with carbon fibre knob.

Courtesy of Richard Utting 'SharpshootingUK' on YouTube.

Straight handle shown fitted to a Tikka M595

Tikka M595/ M695 RH (Minimal bend) Handle with satin bead blast.

Right hand swept back bead blasted handle on a stainless M595

Sako TRG-22, TRG-42 and TRG-S

This is a direct, screw-in replacement for your original Sako TRG 22, TRG 42 and TRG-S (M995) bolt handle.

We CNC machine these from Grade 5 titanium alloy then bead blast and bake on a durable Cerakote-H finish to match the colour of the original Sako metalwork.

Our version has a 5/16" x 24 TPI thread which allows the fitting of just about any after-market knob available as opposed to being forced to retain the original plastic knob with the uncommon metric thread.

Our handle is the same length with no taper. We include our oversized bolt knob made from genuine carbon fiber which provides a slight increase in overall length and better bolt leverage.

£59 (inclusive of post and VAT in UK)*