VIO how-to & FAQ's

1. New VIOS/AIX manage_disk_drivers cmd

2. VIOS multipath support

3. how to remove VSCSI disk

4. Load ISO on VIO

5. Manual VIOS config backup

6. Setting the IP address for the SEA partition

7. VIOS Upgrade steps

8. Changing adapter properties of the SEA

9. Power 570 serial # and I/O drawer setup presentation

10. How to work with VLAN's using VIOS

11. VIO installation and backup using NIM

12. Multipath support for VIOS 2.x

13. Virtual Fibre Adapter properties with AIX 6.x and VIOS 2.x FAQ's

14. Power Systems SAN multipath config using NPIV

15. Can we "mix" vSCSI and NPIV on same adapter FC 5735 for both tape and disk

16. Dynamically adding VFC to client partition

17. Moving AIX from physical to virtual

18. Basic understaning and troubleshooting of LPM