Do's & Don'ts
We have seen so many people facing troubles during the event. Some come prepared and some don’t.
Here are some do’s and don’t’s that we suggest you
1. While fabrication do not complicate the process. Always think logically and go for the cheapest and efficient process like an engineer. For example do not use a CMM to measure the chassis hole dimensions. You can trace the original chassis by hand itself!!!
2. Always practice driving the car as much as you can before you come to the event. Practice makes perfection.
3. Bring all the tools and spares to the event
4. Bring enough fuel for the full event
5. Check that all the screws and bolts are fastened properly
6. Do not come with ready made components and spoil the spirit of the competition. GO AS PER THE RULES ALWAYS .
7. Don’t pull the starter string too much. Just pull it until its extended to 10cms. Otherwise it may fail any time.
8. Slow and steady wins the race!! You have to accept this taking our case into consideration!!
9. Do not do anything without proper knowledge about it. Ask someone around so that they may help you
10. Do not keep driving your vehicle unnecessarily. Once your race is over, pack it.
11. Be sportive and help others with all that you can afford to. It is just a competition and knowledge and brotherhood is very important than winning.