iston Deck Height
Deck height is defined as the distance between the top edge of the piston crown (with the piston at TDC) to the edge of the cylinder liner. The closer the edge of the piston crown is to the edge of the cylinder the high the compression ratio will be.
So if you have pistons that are 10.5:1 and they are 0.010" below the edge of the cylinder and you are able to reduce the deck height by 0.010" then the actual compression ratio of the cylinder will be increased.
The reduction of the piston deck height can be accomplished in several ways. Machining the cylinder block is the most common method.
A word of caution you must know exactly the minimum valve to piston clearance that is required. this varies in different engine designs. To increase the piston to valve clearance usually the valve relief pockets on the piston's crown are enlarged or the height of the piston at TDC must be lowered in the cylinder.