Conferences

List of conferences - presented or published via proceedings

INTERNATIONAL CONFERENCES

  1. T Meena, V Kumar, S Karagadde, Can double diffusive convection exist in metals during solidification?, International Heat and Mass Transfer Conference, IHMTC 2019
  2. I. Thakur, S. Karagadde, A. Srivastava, Evolution of plumes during solidification of binary alloys, and whole field compositional measurements, International Conference on Heat and Mass Transfer, ICHMT 2019
  3. Chaitanya Vundru, Ramesh Singh, Wenyi Yan and Shyamprasad Karagadde, Non-dimensional process maps for normalized dilution limits in laser direct metal deposition, 47th North American Manufacturing Research Conference (NAMRC 47), June 10-14, 2019 | Penn State Behrend’s School of Engineering Bayfront Convention Center, Erie, PA, USA
  4. Siddharam A. Mane, S. Karagadde & S. S. Joshi, Characterisation of friction at the tool–chip interface for orthogonal cutting of Ti-6Al-4V alloy, Advances in Materials and Processing Technologies, DOI: https://doi.org/10.1080/2374068X.2018.1564864
  5. S. Bhagavath, B. Cai, R. Atwood, P.D. Lee, S. Karagadde, Effects of strain rate on hot tear formation in Al-Si-Cu alloys, 5th ICASP Conference, June 17-21, 2019, Salzburg, Austria
  6. V. Kumar, A. Srivastava and S. Karagadde, Double-diffusive flows in multi-component alloys, 7th International and 45th national FMFP Conference, Dec 10-12, 2018, IIT Bombay, India
  7. Kartheek Minnikanti and Shyamprasad Karagadde "Numerical simulation of particle dispersion during solidification of composites," Fluid Mechanics and Fluid Power (7th International and 45th National Conference), 2018
  8. Diwakar Janghel, Shyamprasad Karagadde and Sandip Kumar Saha "Study of shrinkage in phase change material using one-dimensional simplified heat diffusion model" Fluid Mechanics and Fluid Power (7th International and 45th National Conference), 2018, IIT Bombay
  9. Ila Thakur, Virkeshwar Kumar, Shyamprasad Karagadde and Atul Srivastava "Plume Formation during the Unidirectional Solidification of a Binary Transparent Organic Alloy," Fluid Mechanics and Fluid Power (7th International and 45th National Conference), 2018, IIT Bombay
  10. J. Desai, S. Karagadde, A. Sharma, Influence of Ultrasonic flows on solidification, Thermacomp 2018 IISc, Bangalore, India [BEST SPEAKER AWARD]
  11. J. Yadav, GS Abhishek, S. Karagadde, A modified mushy zone permeability model for alloy solidification, Thermacomp 2018 IISc, Bangalore, India
  12. C Vundru, S Paul, R Singh, W Yan, S Karagadde, ‘Numerical Simulation of Multi-Track Laser Cladding of CPM9V on H13 Tool Steel’ APICAM2017 1st Asia-Pacific International Conference on Additive Manufacturing, 4-6 Dec 2017, RMIT University, Melbourne, Australia
  13. V. Kumar, N. Dama, A. Srivastava, S. Karagadde, Real-time study of natural convection heat transfer during directional solidification of water, 2nd Intl ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC) Hyderabad, India, Dec-2017
  14. V. Kumar, A. Srivastava, S. Karagadde, “Non-intrusive and dynamic measurements of temperature and concentration fields during solidification of multi-component alloys” 6th International & 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP-2016), 15-17 December 2016, Allahabad, Uttar Pradesh, India

NATIONAL CONFERENCES:

  1. J. Desai, S. Karagadde, A. Sharma, Numerical Modelling of the Ultrasonic treatment of Mg alloy melt, IC-SMART 2017, CMERI Durgapur, December 2017,
  2. V. Kumar, A. Srivastava, S. Karagadde, Study of temperature field evolution during solidification of water, 43rd National FMFP Conference (Dec-2017) Amrita University Kerala, India
  3. J. Wagh, V. Kumar, A. Srivastava, S. Karagadde, Velocity of plumes generated in unidirectional solidification of binary salt-solution, 43rd National FMFP Conference (Dec-2017) Amrita University Kerala, India
  4. V. Kumar, A. Srivastava, S. Karagadde, in situ study of freckle formation in binary transparent alloys, IIM NMD ATM-2017 (Theme- Advances in Materials Science and Engineering), BITS Goa (Nov 2017)
  5. Abhishek GS, S Karagadde, A Choudhury, Durga A, S.Sondhi, RDG as a Hot-Tearing Criteria for Superalloys, IIM NMD ATM-2017, BITS Goa (Nov 2017)
  6. S Bhagavath, S Karagadde, B. Cai, and PD Lee, Deformation induced Defect formation in HPDC process, IIM NMD ATM-2017, BITS Goa (Nov 2017) [BEST POSTER AWARD]
  7. V. Kumar, A. Srivastava, S. Karagadde, “Non-intrusive and dynamic measurements of temperature and concentration fields during solidification of multi-component alloys” 6th International & 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP-2016), 15-17 December 2016, Allahabad, Uttar Pradesh, India
  8. G. Katiyar, S. Karagadde, SK Saha, A Sharma, Modelling of flow boiling in microchannels using the level-set method, 42nd National conference on Fluid mechanics and fluid power FMFP 2016, Dec 15-17, Surathkal, Karnataka, India

Conference presentations (not included in B)

  1. Abhishek G S, A. Choudhury, S. Karagadde, Cellular-Automaton simulation of microstructure evolution during additive manufacturing, 5th ICASP Conference, June 17-21, 2019, Salzburg, Austria
  2. V. Kumar, A. Srivastava and S. Karagadde, in situ studies of natural convection during solidification of ternary mixtures, 5th ICASP Conference, June 17-21, 2019, Salzburg, Austria
  3. Abhishek G.S., D. Ananthanarayanan, D Kar, A Choudhury, S Karagadde, S K Sondhi Additive Manufacturing of Metals: Applications of Solidification Fundamentals, TMS Annual Meeting and Exhibition, March 2019, Phoenix, USA
  4. S. Bhagavath, B. Cai, R. Atwood, P.D. Lee, S. Karagadde, In situ observations of solidification and convection driven gas microporosity, 7th ICSSP conference, November 19-22, 2018, Trivandrum, India
  5. MA Azeem, S. Karagadde, P Rockett, PD Lee, “4D quantification and microstructure modeling of dendritic patterns in a Co based alloy during solidification”, 6th Decennial International Conference on Solidification Processing, 25-28 July 2017, Beaumont estate, Windsor, UK
  6. PD. Lee, B Cai, MA Azeem, A Kao, S. Karagadde, Informing and Validating ICME Models using Synchrotron Imaging, Frontiers in Materials Processing Applications, Research and Technology, FIMPART, Jul. 9-12, 2017, Bordeaux, France
  7. MA Azeem, PD Lee, AB Phillion, S. Karagadde, P Rockett, D Dye, “4D synchrotron X-ray tomography of dendritic microstructure evolution in a Co based alloy during solidification” in Applications of Solidification Fundamentals, TMS, Feb 27- Mar 3, 2017, San Diego, USA
  8. S. Karagadde, B. Cai, J.L. Fife, M.A. Azeem, K. M. Kareh, C. Puncreobutr, T. Connolley, and P.D. Lee, Granular cracking during semi-solid indentation of Al-Cu alloy, Accepted for oral presentation at Modelling of Casting, Welding and Advanced Solidification Processes, MCWASP XIV, June 21 - 26 2015, Awaji island, Japan