Ladder

The aluminum ladder is cheap. I put it up and found it pretty far off from fitting.

Thinking it may be for a Cheby or something I wrote Surco. Their response was to just force it because aluminum will bend. Yea, right. Aluminum is softer than steel, but look at the leverage. To push it in the 7" will bend the steel door at the top where the brackets are. If you add more bend to the ladder in the middle (off the van), it becomes shorter and will miss the flat spot on the bottom of the door. It is the top and bottom 90 degree bends that are off. Each need to be more than 90. I changed the angle of the top bracket by filing the tubes and then putting the bracket back on. The bottom is still wrong, but it is on there.