Repository

Book Chapters

1. Comparison of Statistical and Soft Computing Models for Predicting Hardness and Wear Rate of Cu-Ni-Sn alloy

2. Modelling Corrosion Phenomenon of Magnesium Alloy AZ91 in Simulated Body Fluids

3. Simulation of Friction Stir Welding of Aluminium Alloy AA5052 – Tailor Welded Blanks

4. Corrosion protection of Magnesium Alloys in Simulated Body Fluids using Nanophase Al2O3

5. Optimizing the Conveyor Belt Speed of a Bright Annealing Furnace

6. Numerical Modeling of the Thermal Phenomenon in Wind Turbine Disc Brake

7. Numerical Modeling of Compaction Stresses in Powder Metallurgy Processing of Fly-ash Based Ceramic Tiles

8. Investigations on the Microstructure and Texture Evolution in the Cold-Rolled AA8090 Alloy

9. Simulation of Thermal Phenomenon in the course of Friction Stir Welding of ASTM A710 Steel with AA5083 alloy

10. Fabrication of Continuous Fiber-Reinforced Composite Sheet Metal Using Centrifugal Casting

Journal Articles

  1. Characterization of Hybrid Black Toner using the parameters Waster Toner and Nano Phase Carbon

  2. Process parameters effect on the strength of friction stir spot welded AA6061

  3. Comparison of ANN training algorithms for predicting the tensile strength of friction stir welded aluminium alloy AA1100

  4. Soft computing model for analysing the effect of friction stir processing parameters on the intergranular corrosion susceptibility of aluminium alloy AA5083

  5. Study on the Mechanical and Corrosion behavior of AA5052 Tailor Welded Blanks Fabricated using Friction Stir Welding

  6. Modelling Corrosion Behavior of Friction Stir Processed Aluminium Alloy 5083 Using Polynomial: Radial Basis Function

  7. Forecasting the tribological properties of AZ91D magnesium alloy using soft computing model

  8. Influence of FSP on the microstructure, microhardness, intergranular corrosion susceptibility and wear resistance of AA5083 alloy

  9. Effect of heat treatments on the microstructure and mechanical properties of friction stir processed magnesium alloy AZ91D

  10. Effect of composition and aging time on the hardness and wear behavior of Cu-Ni-Sn spinodal alloy

  11. Microstructure, hardness and corrosion behaviour of friction stir processed AA5083

  12. Mechanical properties and corrosion behaviour of AZ91D-HAP surface composites fabricated by friction stir processing

  13. Effect of friction stir welding process parameters on the tensile strength of dissimilar aluminum alloy AA2024-T3 and AA7075-T6 joints

  14. Synthesis and Characterization of Magnesium Alloy Surface Composite (AZ91D - SiO2) by Friction Stir Processing for Bioimplants

  15. Investigations on the Surface topography, Corrosion behavior, and Biocompatibility of Friction Stir Processed Magnesium Alloy AZ91D

  16. Research and Development in Magnesium Alloys for Industrial and Biomedical Applications: A Review

  17. Investigations on the Tribological Properties of Heat-Treated Copper Composite Using Hybrid Quadratic–Radial Basis Function Model

  18. Investigations on the corrosion behaviour and biocompatibility of magnesium alloy surface composites AZ91D-ZrO2 fabricated by friction stir processing

  19. Study on the Corrosion and Wear Characteristics of Magnesium Alloy AZ91D in Simulated Body Fluids

  20. Investigations on the mechanical, wear and corrosion properties of cold metal transfer welded and friction stir welded aluminium alloy AA2219

  21. Development and characterization of dissimilar joint between AA2024-T3 and AA6061-T6 by modified friction stir clinching process

  22. Investigations on the Tribological Behaviour of Functionally Gradient Iron based Brake Pad Material

  23. Friction Welding of Cast Iron and Phosphor Bronze

  24. Effect of Fe particles on the microstructural evolution and mechanical properties of friction welded Al-Cu components

  25. Dissimilar modified friction stir clinching ofAA2024-AA6061 aluminum alloys: Effects of materials positioning

  26. Investigations on the Creep Behavior of Friction-Stir-Processed Magnesium Alloy AE42

  27. Influence of tool traverse speed on microstructure and mechanical properties of CuNi/B4C surface composites

  28. Metallurgical Characterization and Mechanical Properties of Solid-Liquid Compound Casting of Aluminum Alloy – Steel Bimetallic Materials

  29. Examination of the Mechanical, Corrosion, and Tribological Behavior of Friction Stir Welded Aluminum Alloy AA8011

  30. Parametric Study On The Spring-Back Effect In AA5052 Alloy In The Course Of Three-Point Roll Bending Process

  31. Effect of Friction Stir Processing and Heat Treatment on the Corrosion Properties of AZ31 alloy

  32. Characterization of AZ31-NbC Surface Composite Fabricated by Friction stir Processing

  33. Investigation on the microstructure, microhardness, and tribological behavior of AA1100-hBN surface composite

  34. Impact of Laser Surface Texturing (LST) on the Tribological Characteristics of Piston Rings and Cylinder Liners – A Review. Part 1 - Development of LST Technology

  35. Modified Friction Stir Clinching of 2024-T3 to 6061-T6 aluminium alloy: Effect of Dwell Time and Precipitation-Hardening Heat Treatment

  36. Effect of Shoulder Features during Friction Stir Extrusion Welding of 2024-T3 to 6061-T6 Aluminium Alloys

  37. A comparative study on weld characteristics of AA5083-H112 to AA6061-T6 sheets produced by MFSC and FSSW processes

  38. Effect of Nd:YAG Pulsed-Laser Welding Parameters on Melting Rate of GTD-111 Superalloy Joint

  39. Development of Fly Ash based Friction Material for Wind Turbines by Liquid Phase Sintering Technology

  40. Development and Tribological Characterization of Fly Ash Reinforced Iron based Functionally Gradient Friction Materials

  41. Characterization of AA5052-ZrO2 and AA5052-SiO2 Surface Composites Fabricated by Friction Stir Processing

  42. Investigations on the Effect of Cyclic Heat Treatment on the Mechanical Properties of Friction Stir Welded Aluminum Alloys (AA5052 & AA6061)

  43. Impact of Laser Surface Texturing (LST) on the Tribological Characteristics of Piston Rings and Cylinder Liners – A Review. Part 2

Conference Publications

  1. Chromium Oxide Nano Powder – An Alternative to Fuser Oil in Photo Copiers

  2. Investigations on the Mechanical Properties of MWCNT reinforced ASTM A48 by Testing & Mathematical modelling

  3. Modelling tensile strength of friction stir welded aluminium alloy 1100 using fuzzy logic

  4. ANN model for predicting the intergranular corrosion susceptibility of friction stir processed aluminium alloy AA5083

  5. Solar based Grid Tie Integration System for Efficient Power ManagementAnalysing the strength of friction stir spot welded joints of aluminium alloy by fuzzy logic

  6. Numerical modelling of thermal phenomenon in friction stir welding of aluminum plates

  7. Modelling of peak temperature during friction stir processing of magnesium alloy AZ91

  8. Analysing the strength of friction stir welded dissimilar aluminium alloys using Sugeno Fuzzy model

  9. Analysing the influence of FSP process parameters on IGC susceptibility of AA5083 using Sugeno – Fuzzy mode

  10. Influence of friction stir processing parameters on the wear resistance of aluminium alloy AA5083

  11. Study of the effect of parameters in friction surfacing of Monel over Mild Steel using linear – radial basis function model

  12. Friction surfacing mild-steel with Monel and predicting the coating parameters using fuzzy logic

  13. Intergranular corrosion susceptibility of friction stir processed aluminium alloy 5083

  14. Artificial neural network model for predicting the tensile strength of friction stir welded aluminium alloy AA1100

  15. Optimizing the tensile strength of friction stir welded dissimilar aluminium alloy joints using particle swarm optimization

  16. Tribological Performance of Heavy-Duty Functionally Gradient Friction Material (Cu-Sn-Fe-Cg-SiC-Al2O3) synthesized by PM route

  17. Predicting the Wear Rate of Aluminum Alloy AA2024-T351 using Hybrid Linear function and Radial Basis Function

  18. Cost-effective manufacturing of piping components with consistent quality through continuous furnace brazing

  19. Effect of load, sliding distance and sliding velocity on the wear properties of aluminum alloy AA5052

  20. Experimental Study on Laser Welding of AISI 304 Steel with Design of Experiments Approach

  21. Effect of heat treatment on the mechanical and wear behavior of friction stir processed AA5052 alloy

  22. Manufacturing of continuous fiber reinforced sintered brake pad and friction material

  23. Elimination of casting defects induced by cold box cores

  24. Vacuum Brazing of Mild Steel Using Eutectic CuSil Brazing Alloy

  25. Design, Fabrication, and Analysis of Cost Effective Steel Honeycomb Structures

  26. Development and Characterization of Aluminum Matrix Composite Reinforced with Continuous Stainless-Steel Fibers

  27. Artificial neural network models for predicting the corrosion behavior of friction stir processed AA5083

  28. Fabrication of Fly-Ash Based Tiles using Liquid Phase Sintering Technology

  29. Soft Computing model for predicting the wear resistance of friction stir processed aluminum alloy AA5083

  30. Investigations on the Mechanical and Tribological Performance of Nickel Aluminum Bronze- CaCO3 Composite

  31. Analysing the strength of friction stir spot welded joints of aluminium alloy by fuzzy logic

  32. Finite Element Modelling of Thermal History During Friction Stir Processing of AA5052

  33. Effect of Corrosion on the Tensile Behavior of Friction Stir Welded Aluminum Alloy AA8011

If articles are not found, use ResearchGate portal for requesting articles.