Scholarly Publications

Book Chapter

1. R.R. Salary, “Advanced Manufacturing for Bone Tissue Engineering and Regenerative Medicine”, IntechOpen, London, UK, Published: February 24th, 2022. DOI: 10.5772/intechopen.102563.

Journal Publications (# = Advisee; * = Corresponding Author)

1. A. Sareen#, C.W. Hill, and R.R. Salary*, “Investigation of Virtual Impactor Design Parameters in Aerosol Jet Printing Using Computational Fluid Dynamics”, ASME Transactions, Journal of Micro and Nano Science and Engineering, Sep 2025, 13(3): 031001 (16 pages), JMNM-24-1046. DOI: https://doi.org/10.1115/1.4068128

2. B. Coburn# and R.R. Salary*, “Mechanical Characterization of Porous Bone-like Scaffolds with Complex Microstructures for Bone Regeneration”, MDPI Journal of Bioengineering, 2025, 12(4), 416. DOI: https://doi.org/10.3390/bioengineering12040416

3. B. Coburn# and R.R. Salary*, “Computational Fluid Dynamics (CFD) Modeling of Material Transport through Triply Periodic Minimal Surface (TPMS) Scaffolds for Bone Tissue Engineering”, ASME Transactions, Journal of Biomechanical Engineering, 1-32, BIO-24-1187, 1-32.  DOI: https://doi.org/10.1115/1.4067575

4. L.M. Lawrence, R.R. Salary, V. Miller, A. Valluri, K.L. Denning, S. Case-Perry, K. Abdelgaber, S. Smith, P.P. Claudio*, and J.B. Day*, “Osteoregenerative Potential of 3D-Printed Poly-ε-Caprolactone Tissue Scaffolds In-vitro Using Minimally Manipulative Expansion of Primary Human Bone Marrow Stem Cells”, MDPI International Journal of Molecular Sciences, 24(5), 4940. DOI: 10.3390/ijms24054940.

5. Y. Abdelgaber#, C. Klemstine#, J.B. Day, and R.R. Salary*, “A Novel, Image-Based Method for Characterization of the Porosity of Additively Manufactured Bone Scaffolds with Complex Microstructures”, Journal of Manufacturing Science & Engineering, 1-42, MANU-22-1309. DOI: 10.1115/1.4056434.

6. M. Yu#, Y.J. Yeow#, L. Lawrence, P.P. Claudio, J.B. Day, and R.R. Salary*, “Characterization of the Functional Properties of PCL Bone Scaffolds Fabricated Using Pneumatic Microextrusion”, ASME Transactions, Journal of Micro and Nano-Manufacturing, Sep 2021, 9(3): 030905, Paper Number: JMNM-20-1074, DOI: 10.1115/1.4051631.

7. R.R. Salary, J.P. Lombardi, D.L. Weerawarne, P.K. Rao, and M.D. Poliks*, “A Computational Fluid Dynamics Investigation of Pneumatic Atomization, Aerosol Transport and Deposition in Aerosol Jet Printing Process”, ASME Transactions, Journal of Journal of Micro and Nano-Manufacturing, Paper Number: JMNM-20-1007, Mar 2021, 9(1): 010903 (16 pages). DOI: 10.1115/1.4049958.

8. R.R. Salary, J.P. Lombardi, D.L. Weerawarne, M.S. Tootooni, P.K. Rao, and M.D. Poliks, “A Sparse Representation Classification Approach for Near Real-Time, Physics-Based Functional Monitoring of Aerosol Jet-Fabricated Electronics”, ASME Transactions, Journal of Manufacturing Science and Engineering, Paper No: MANU-18-1807, 142(8): 081007, August 2020. DOI: 10.1115/1.4047045. 

9. J.P. Lombardi, R.R. Salary, D.L. Weerawarne, P.K. Rao, and M.D. Poliks, “Image-Based Closed-Loop Control of Aerosol Jet Printing Using Classical Control Methods”, ASME Transactions, Journal of Manufacturing Science and Engineering, 141(7), 071011, Paper No: MANU-18-1562, 2019. doi: 10.1115/1.4043659.

10. R.R. Salary, J.P. Lombardi, P.K. Rao, and M.D. Poliks, "Online Monitoring of Functional Electrical Properties in Aerosol Jet Printing Additive Manufacturing Process Using Shape-From-Shading Image Analysis", ASME Transactions, Journal of Manufacturing Science and Engineering, 139(10): 101010-101010-13, 2017. doi: 10.1115/1.4036660.

11. R.R. Salary, J.P. Lombardi, M.S. Tootooni, R. Donovan, P.K. Rao, P. Borgesen, and M.D. Poliks, “Computational Fluid Dynamics (CFD) Modeling and Online Monitoring of Aerosol Jet Printing Process”, ASME Transactions, Journal of Manufacturing Science and Engineering, 139(2), pp. 021015-021036, 2016. doi: 10.1115/1.4034591.

12. A.B. Kellicutt, R.R. Salary, O.A. Abdelrahman, and J.Q. Bond, “An Examination of the Intrinsic Activity and Stability of Various Solid Acids During the Catalytic Decarboxylation of γ-Valerolactone”, Royal Society of Chemistry Journal of Catalysis Science & Technology, 4, 2267-2279, 2014. doi: 10.1039/C4CY00307A.

13. R. Salary, M.R. Jafari Nasr, M. Amidpour, and M. Kamalinejad, “Design of Oil Refinery Hydrogen Networks Using Process Integration Principles”, Journal of Chemistry and Chemical Engineering, 27 (4), 49-64, 2008.

Peer-Reviewed Conference Publications (# = Advisee; * = Corresponding Author)

1. H. Smith#, H. Hanlon#, and R.R. Salary*, “Parametric Design and Characterization of Novel TPMS Porous Scaffolds for Bone Tissue Engineering”, 53rd SME North American Manufacturing Research Conference (NAMRC 53, 2025), Paper Number 122, 8 Pages, Clemson University, Greenville, SC, USA, June 23 - 27, 2025. DOI: 10.1016/j.mfglet.2025.06.106.

2. H. Al-Qawasmi# and R.R. Salary*, “Design and Fabrication of Biodegradable Bone Tissue Scaffolds Based on the Nuclear Pasta Theory”, 53rd SME North American Manufacturing Research Conference (NAMRC 53, 2025), Paper Number 123, 9 Pages, Clemson University, Greenville, SC, USA, June 23 - 27, 2025. DOI: 10.1016/j.mfglet.2025.06.045.

3. H. Rollins# and R.R. Salary*, “A Computational Fluid Dynamics Model for Investigation of Material Flow in a Perfusion Bioreactor toward Optimal Biomedical Design of Cell-Laden Scaffolds for Bone Regeneration”, ASME International Mechanical Engineering Congress & Exposition (IMECE 2024), Paper Number: IMECE2024-139666, November 17-21, 2024, Portland, Oregon, USA. DOI: 10.1115/IMECE2024-139666.

4. A. Sareen#, C.W. Hill, and R.R. Salary*, “A Computational Fluid Dynamics Model for Investigation of Material Transport through the Virtual Impactor in Aerosol Jet Printing”, ASME International Mechanical Engineering Congress & Exposition (IMECE 2024), Paper Number: IMECE2024-139667, Nov. 17-21, 2024, Portland, Oregon, USA. DOI: 10.1115/IMECE2024-139667.

5. B. Coburn# and R.R. Salary*, “Investigation of Material Transport Through Triply Periodic Minimal Surface (TPMS) Bone Scaffolds Using Computational Fluid Dynamics (CFD)”, ASME Manufacturing Science and Engineering Conference (MSEC 2024), MSEC2024-123878, V001T03A002; 10 pages, Knoxville TN, USA, June 17–21, 2024. DOI: 10.1115/MSEC2024-123878

6. H. Al-Qawasmi#, S.J. Risch#, and R.R. Salary*, “Polypropylene and Glass Fiber Composite Extrusion for Additive Biofabrication of Bone Tissue Scaffolds with Complex Microstructures”, ASME Manufacturing Science and Engineering Conference (MSEC 2024), MSEC2024-123879, V001T03A003; 9 pages, Knoxville TN, USA, June 17–21, 2024. DOI: 10.1115/MSEC2024-123879

7. R.G. Webb#, K.N. Legg#, Hamzeh Al-Qawasmi#, N. Spitzer, and R.R. Salary*, “Novel Biocompatible Material Formulations for 3d-Microfabrication of Porous Scaffolds for Bone Regenerative Engineering”, ASME International Mechanical Engineering Congress & Exposition (IMECE 2023), Paper Number: IMECE2023-110404, October 29 – November 2, 2023, New Orleans, LA, USA. DOI: 10.1115/IMECE2023-110404

8. B. Coburn#, R. Joyce, and R.R. Salary*, “Investigation of the Influence of Nylon-6 vs. Nylon-66 on the Mechanical Performance of Composite Bone Tissue Scaffolds”, ASME International Mechanical Engineering Congress & Exposition (IMECE 2023), Paper Number: IMECE2023-110405, October 29 – November 2, 2023, New Orleans, LA, USA. DOI: 10.1115/IMECE2023-110405

9. E. O’Malley# and R.R. Salary*, “3D-Fabrication of Hydroxyapatite-Polysaccharide Composite Scaffolds for Bone Tissue Engineering”, ASME Manufacturing Science and Engineering Conference (MSEC 2023), MSEC2023-100819, 7 Pages, Rutgers University College of Engineering, New Brunswick, NJ, USA, June 12-16, 2023. DOI: 10.1115/MSEC2023-100819. 

10. J. Blatt#, J. Kirkendoll#, P.K. Mandava#, Z. Preston#, R. Joyce, and R.R. Salary*, “An Image-Based Convolutional Neural Network Platform for the Prediction of the Porosity of Composite Bone Scaffolds, Fabricated Using Material Extrusion Additive Manufacturing”, ASME International Mechanical Engineering Congress & Exposition (IMECE 2022), Paper Number: IMECE2022-95044, October 30 - November 3, 2022, Columbus, OH, USA.

11. P.K. Mandava#, R. Joyce, J.B. Day, and R.R. Salary*, “Investigation of the Mechanical Properties of Additively Manufactured Bone Tissue Scaffolds, Composed of Polyamide, Polyolefin, and Cellulose Fibers”, ASME Manufacturing Science and Engineering Conference (MSEC 2022), MSEC2022-85435, 6 Pages, Purdue University, West Lafayette, IN, USA, June 27 - July 01, 2022. DOI: 10.1115/MSEC2022-85435.

12. R. Raines#, J.B. Day, and R.R. Salary*, “Experimental Characterization of the Mechanical Properties of Medical-Grade Dental Implants, Fabricated Using Vat-Photopolymerization Additive Manufacturing Process”, ASME Manufacturing Science and Engineering Conference (MSEC 2022), MSEC2022-85436, 7 Pages, Purdue University, West Lafayette, IN, USA, June 27 - July 01, 2022. DOI: 10.1115/MSEC2022-85436.

13. T. Ekstrom#, J.B. Day, and R.R. Salary*, “Investigation of the Influence of Hydroxyapatite and Polysaccharide Concentration on the Mechanical Properties of Bone Scaffolds, Fabricated Using Freeze Drying Process”, ASME Manufacturing Science and Engineering Conference (MSEC 2022), MSEC2022-85437, 6 Pages, Purdue University, West Lafayette, IN, USA, June 27 - July 01, 2022. DOI: 10.1115/MSEC2022-85437.

14. C. Klemstine#, Y. Abdelgaber#, L. Lawrence, J.B. Day, P.P. Claudio, and R.R. Salary*, “Characterization of the Compressive Properties of Triply Periodic Minimal Surface PCL Scaffolds for Bone Tissue Engineering”, ASME International Mechanical Engineering Congress & Exposition (IMECE 2021), Paper Number: IMECE2021-72125,  Volume 2A: Advanced Manufacturing, V02AT02A056, November 1-5, 2021. DOI: 10.1115/IMECE2021-72125. 

15. Y. Abdelgaber#, C. Klemstine#, L. Lawrence, J.B. Day, P.P. Claudio, and R.R. Salary*, “A Novel Image-Based Method for In Situ Characterization of the Pore Size Distribution and Dimensional Accuracy of Bone Tissue Scaffolds”, ASME International Mechanical Engineering Congress & Exposition (IMECE 2021), Paper Number: IMECE2021-72132, Volume 2A: Advanced Manufacturing, V02AT02A057, November 1-5, 2021. DOI: 10.1115/IMECE2021-72132.

16. A. Chaffins#, M. Yu#, P.P. Claudio, J.B. Day, and R.R. Salary*, “Investigation of the Functional Properties of Additively-Fabricated Triply Periodic Minimal Surface-Based Bone Scaffolds for the Treatment of Osseous Fractures”, ASME Manufacturing Science and Engineering Conference (MSEC 2021), MSEC2021-63413(2004), V001T03A004, 7 Pages, Hosted by the University of Cincinnati, Cincinnati, OH, USA, June 21 - 25, 2021.

17. M. Yu#, L. Lawrence, P.P. Claudio, J.B. Day, and R.R. Salary*, “Pneumatic Microextrusion-Based Additive Biofabrication of Polycaprolactone Bone Scaffolds: Part II – Investigation of the Influence of Polymer Flow Parameters”, ASME Manufacturing Science and Engineering Conference (MSEC 2021), Paper No: MSEC2021-63412(2002), V001T01A012, 8 Pages, Hosted by the University of Cincinnati, Cincinnati, OH, USA, June 21 - 25, 2021.

18. L. Lawrence, J.B. Day, P.P. Claudio, R.R. Salary*, “Investigation of the Regenerative Potential of Human Bone Marrow Stem Cell-Seeded Polycaprolactone Bone Scaffolds, Fabricated Using Pneumatic MicroExtrusion Process”, ASME Manufacturing Science and Engineering Conference (MSEC 2021), Paper No: MSEC2021-63411(1997), V001T03A003, 6 Pages, Hosted by the University of Cincinnati, Cincinnati, OH, USA, June 21 - 25, 2021.

19. M. Yu#, Y.J. Yeow#, L. Lawrence, P.P. Claudio, J.B. Day, and R.R. Salary*, “Investigation of the Effects of Design and Process Parameters on the Mechanical Properties of Biodegradable Bone Scaffolds, Fabricated Using Pneumatic MicroExtrusion Process”, ASME International Mechanical Engineering Congress & Exposition (IMECE 2020), Paper Number: IMECE2020-24252, Virtual Conference (Due to the COVID-19 Pandemic), Portland, OR, USA, November 16-19, 2020.

20. Y.J. Yeow#, M. Yu#, J.B. Day, and R.R. Salary*, “A Computational Fluid Dynamics (CFD) Study of Material Flow in Pneumatic MicroExtrusion (PME) Additive Manufacturing Process”, ASME International Mechanical Engineering Congress & Exposition (IMECE 2020), Paper Number: IMECE2020-24325, Virtual Conference (Due to the COVID-19 Pandemic), Portland, OR, USA, November 16-19, 2020.

21. N.A. Weese#, C.M. Rankin#, D. Zhao#, C. Hart#, P. Quinlan, J.B. Day, and R.R. Salary*, “Experimental Optimization of Polymer Jetting Additive Manufacturing Process Using Taguchi Design”, ASME International Mechanical Engineering Congress & Exposition (IMECE 2020), Paper Number: IMECE2020-24271, Virtual Conference (Due to the COVID-19 Pandemic), Portland, OR, USA, November 16-19, 2020..

22. D. Zhao#, M. Yu#, L. Lawrence, P.P. Claudio, J.B. Day, and R.R. Salary*, “Investigation of the Influence of Consequential Design Parameters on the Mechanical Performance of Biodegradable Bone Scaffolds, Fabricated Using Pneumatic Micro-Extrusion Additive Manufacturing Process”, ASME Manufacturing Science and Engineering Conference (MSEC 2020), Paper Number: MSEC2020-8512, Volume 1, V001T03A009, Virtual Conference (Due to the COVID-19 Pandemic), University of Cincinnati, Cincinnati, OH, USA, June 22-26, 2020. DOI: 10.1115/MSEC2020-8512.

23. D. Zhao#, C. Hart#, N.A. Weese#, C.M. Rankin#, J. Kuzma, J.B. Day, and R.R. Salary*, “Experimental and Computational Analysis of the Mechanical Properties of Biocompatible Bone Scaffolds, Fabricated Using Fused Deposition Modeling Additive Manufacturing Process”, ASME Manufacturing Science and Engineering Conference (MSEC 2020), Paper Number: MSEC2020-8511, Volume 1, V001T03A008, Virtual Conference (Due to the COVID-19 Pandemic), University of Cincinnati, Cincinnati, OH, USA, June 22-26, 2020. DOI: 10.1115/MSEC2020-8511.

24. R.R. Salary, J.P. Lombardi, D.L. Weerawarne, P.K. Rao, and M.D. Poliks*, “A Computational Fluid Dynamics (CFD) Study of Pneumatic Atomization in Aerosol Jet Printing (AJP) Process”, ASME International Mechanical Engineering Congress & Exposition (IMECE 2019), Paper No: IMECE2019-12027, V02AT02A065; 9 Pages, Salt Lake City, UT, USA, November 11-14, 2019. DOI: 10.1115/IMECE2019-12027.

25. R.R. Salary, J.P. Lombardi, D.L. Weerawarne, P.K. Rao, and M.D. Poliks*, “Toward Defect-Free Additive Fabricating of Flexible and Hybrid Electronics: Physics-based Computational Modeling and Control of Aerosol Jet Printing”, Springer's AHFE 2019 - Additive Manufacturing, Modeling Systems and 3D Prototyping, Washington, D.C., USA, July 24-28, 2019.

26. R.R. Salary, J.P. Lombardi, D.L. Weerawarne, P.K. Rao, and M.D. Poliks*, “A State-of-the-Art Review on Aerosol Jet Printing (AJP) Additive Manufacturing Process”, ASME 14th Manufacturing Science and Engineering Conference (MSEC 2019), Penn State Erie, The Behrend College, Erie, PA, USA, June 10-14, 2019.

27. R.R. Salary, J.P. Lombardi, D.L. Weerawarne, P.K. Rao, and M.D. Poliks*, “A Computational Fluid Dynamics (CFD) Study of Material Transport and Deposition in Aerosol Jet Printing (AJP) Process”, ASME International Mechanical Engineering Congress& Exposition (IMECE 2018), David L. Lawrence Convention Center, Pittsburgh, PA, USA, November 9-15, 2018.

28. R.R. Salary, J.P. Lombardi, D.L. Weerawarne, M.S. Tootooni, P.K. Rao, and M.D. Poliks*, “In Situ Functional Monitoring of Aerosol Jet Printed Electronic Devices Using a Combined Sparse Classification Approach”, ASME 13th Manufacturing Science and Engineering Conference (MSEC 2018), Paper No. 6586, 12 pages, Texas A&M University, College Station, TX, USA, June 18-22, 2018.

29. J.P. Lombardi, R.R. Salary, D.L. Weerawarne, P.K. Rao, and M.D. Poliks*, “In Situ Image-Based Monitoring and Closed-Loop Control of Aerosol Jet Printing”, ASME 13th Manufacturing Science and Engineering Conference (MSEC 2018), Paper No. 6487, 10 pages, Texas A&M University, College Station, TX, USA, June 18-22, 2018.

30. R.R. Salary, J.P. Lombardi, D.L. Weerawarne, M.S. Tootooni, P.K. Rao, and M.D. Poliks*, “Physics-based Functional Monitoring of Aerosol Jet-Printed, Electronic Devices", IISE Annual Conference and Expo, Loews Royal Pacific Resort, Orlando, FL, USA, May 19-22, 2018. (Doctoral Colloquium Award - 1st Place)

31. R.R. Salary, J.P. Lombardi, P.K. Rao, and M.D. Poliks*, “Additive Manufacturing (AM) of Flexible Electronic Devices: Online Monitoring of 3D Line Morphology in Aerosol Jet Printing Process using Shape-from-Shading Image Analysis”, ASME 12th Manufacturing Science and Engineering Conference (MSEC 2017), Paper No. 2947, 9 pages, University of Southern California, Los Angeles, CA, USA, June 4 - 8, 2017.

32. R.R. Salary, J.P. Lombardi, M.S. Tootooni, R. Donovan, P.K. Rao, P. Borgesen, and M.D. Poliks*, “In situ Sensor-based Monitoring and Computational Fluid Dynamics (CFD) Modeling of Aerosol Jet Printing (AJP) Process”, ASME 11th Manufacturing Science and Engineering Conference (MSEC 2016), Paper No. 8535, Vol. 2, pp. V002T04A049; 13 pages, Virginia Tech, Blacksburg, VA, USA, June 27 – July 1, 2016. doi: 10.1115/MSEC2016-8535.