Embedded Files
... until hey presto as if by magic both side finished, apart from the plugs, cutting. sanding etc.
After almost 4 years of dust and grime, the lower section of the roof gets a quick brush over prior to the prep work for the re-instatement of the cornice that cover the edge of the roof canvas. The white bit is the clean bit!
Each length of cornice (approx 20ft ) had to have pilot hoes every six inches drilled and sunk in preparation for the screws and the plugs. Every 6 inches over the lengths for both sides... and I volunteered for this!!
As each section of cornice went up, the side looked more complete... and then the other side with lots of looking, screwing, fitting etc...
Page updated
Google Sites
Report abuse