PRODUCT QUALITIES AND INFORMATION
A 4 Autism Painting Company
A Nationwide Autism Benefiting Organization
508.372.0633
Like us on Facebook
a4autismpainting@gmail.com
Cover-Stain by Zinsser
All purpose, all surface, oil-base primer-sealer stain killer bond coat for interior and exterior use. A quick dry, high adhesion formula that seals stains from water, smoke, fire, nicotine and tannin bleed. Can be recoated in 1 hour. Can use under or over any oil or latex topcoat.
Peel Bond by X-I-M
• Fast drying, penetrating, filling primer for exterior applications
• Ideal for rough surfaces, T111 Siding, Plywood, Stucco, Brick,
• Can save hours of prep work
• Remains flexible
• Low temp, high humidity application
• Soap and water clean-up
• Top coat with exterior latex and elastomeric paints in 60 minutes
• Tintable with water based tint colors
Sherwinn-Williams Pro-Mar 200
For more than two decades, contractors, specifiers and owners have counted on ProMar 200 to deliver a quality finish that stands the test of time. This product provides just the right combination of scrubbability and resistance to marring that defines superior durability. ProMar 200 also touches up to your exacting standards. So you can be sure that the job you finish today will still look great for years to come.
Super Paint
Count on SuperPaint Exterior Acrylic Latex to protect against the elements. Cold and frosty or hot and humid, this exterior acrylic latex paint goes on fast and provides excellent protection against mildew, fading and peeling. And thanks to its advanced acrylic resin formula, you’ll enjoy superior adhesion and color retention that lasts and lasts.
A-100 Exterior Acrlyic LatexPro-Ma
With a 100% acrylic formula that covers well and lasts long, A-100 Exterior Latex Paint is a proven performer that meets your expectations and your need to keep an eye on the bottom line.
Product Features
The 100% acrylic resins in A-100 make it a long-lasting choice, with assured application and great hide as well as excellent color retention.
Performs in temperatures as low as 35 F so residential and commercial contractors can apply it with confidence in cold, damp conditions.
Covers efficiently and easily on a wide range of surfaces including wood, brick, concrete block, metal, aluminum siding, masonry and asbestos siding.
Once applied, it adheres tightly with tough dependability-resisting frost, fading, chalking, dirt and mildew.
SHER-WOOD® Vinyl Sealer 24%
SHER-WOOD® Vinyl Sealer 24% Solids is a low HAPS, fast drying vinyl sealer. It offers better moisture resistance than nitrocellulose lacquer sealers. Intended for use under all solvent based SHER-WOOD® finishing clears.
Fast drying.
Easy sanding.
24% weight solids; higher than most other vinyl sealers.
Compatible with a wide range of topcoats.
Excellent moisture resistance.
Stearate free.
Meets KCMA requirements with solvent based and select water reducible SHER-WOOD® wood finishing topcoats listed below.
Good holdout and build.
May be applied with conventional spray, warm spray, airless, air assisted airless spray, and HVLP.
Meets the Federal HAPS rule for wood finishes.
SHER-WOOD® CAB-Acrylic Lacquer
SHER-WOOD® CAB-Acrylic Lacquer is formulated to meet the water white and non-yellowing demands of the furniture, kitchen cabinet, and wood finishing markets. It is intended as a clear topcoat over white, pickled, or light pastel stains where the best non-yellowing properties are required. It presents the best chemistry of lacquers for resistance to yellowing.
Fast drying.
Excellent film clarity.
Excellent resisting to yellowing - superior to all nitrocellulose compositions.
May be used directly over solid color nitrocellulose lacquers as a "scuff coat".
Excellent film clarity and color retention.
Application by conventional, airless, or air assisted airless spray equipment.
Excellent print resistance after overnight dry.
Meets the federal HAPS (Hazardous Air Pollutants) rule for wood products as packaged.
Minwax® provides a full range of environmentally responsible products that deliver beauty and protection, while meeting or even exceeding the most stringent environmental regulations. In addition, Minwax® takes steps to minimize our environmental impact.
Minwax® provides a range of products, including those that are low-VOC and which help achieve LEED® credit* toward green building standards.
Minwax® uses sustainable raw materials in our products, such as linseed and soya oils, whenever possible.
Minwax® uses recycled and recyclable materials in our packaging whenever we can, including up to 25% recycled steel, 10% post-consumer, in our metal cans.
Minwax® reduces the amount of solvent in our low-VOC formulas to lessen the vapors emitted into the atmosphere.
Minwax® formulates many of our coatings to clean up easily with soap and water, rather than with harsh solvents. We've also made many of our products low-odor to help improve indoor air quality.
Minwax® reduces the waste we produce in our manufacturing processes, and implements energy efficient methods in our plants. This includes recycling and reuse of materials in our manufacturing processes and the use of fluorescent lighting in our facilities.
Minwax® uses streamlined distribution processes, helping to conserve fuel, energy and other natural resources.From formulation through manufacture and beyond, we keep our environmental commitment top of mind.
BEN-MOORE
Super-Spec
An acrylic blended latex eggshell enamel designed for application to a wide variety of interior surfaces such as trim, walls and ceilings. This highly durable, low sheen finish enamel has excellent hiding and touch up along with easy application and soap and water clean up.