Wiring Diagrams:
Before:
*Note: This is the factory wiring diagram and wire colors for my Frigidair 7.2 cuft chest freezer only.
After:
*Note: I did not purchase an extra power cord or anything else but 16 guage wire to wire this to the controller. Some homebrewtalk guides say use 14 gauge, but my existing power wiring was 18 gauge and I got a good deal on 16 gauge.
*Note: I keep my existing thermostat temperature level on 7.
LOVE Controller Software Setup:
Button navigation with the TSX3:
Set: Activate current option
Set+(Down): Go back
Set [Hold 8 seconds]: Activate menu
My Initial Setup Values:
*On first startup, set "Set" value to "40.0".
Hold Set for 8 seconds to access Root Menu.
*Note: I had to leave my love controller alone for a minute before the 8 second hold would work.
Once you hold Set for 8 sec, enter code ("0" factory set), press "Set" again then toggle through menu's.
*Note: For more information on the value meaning, read the manual here: http://www.dwyer-inst.com/PDF_files/TSX3_iom.pdf
COn:
Set: 40.0
r0: 3.0
R1: 37.0
r2: 43.0
r4: 0.0
r6: COn
F0: 28.0
F1: YES
c0: 10
c1: 0
c2: 5
c3: 5
c4: 0
c5: 10
PrO:
P0: ºF
P1: 0.0
P2: 0.0
P4: YES
P5: SD1
P6: no
dEF:
d12: SD1