Looking for Distributor

The cubic degree of Bezier-X solution of mine was come out in early 2012, and the quartic degree of Bezier-X solution was finished around the late 2013, also roughly in the middle of 2014 I finished my first version of NURBS-X solution too. So at least to myself, I have tested all of these methods countless times and they are very stable and very fast in performance.

For the precision level of my solution, my tests are normally running in the range of 1.0e-3 to 1.0e4, and the deviation threshold was set at 1.0e-9 under the 8-byte-double environment. As you can understand the modern double-precision-floating-number is actually moving like a slide-rule, so if your inputs are between 0.001 to 1000 units then you certainly can expect the output of my solution will give you the answer with the precision up to 1.0e-9. However, if the input is 1.0e6 or 1.0e12 then it would be very hard or even no way for me to control the deviation level in the same spot.

I wish my solution can be combined into the modern CAD/CAM software or even plant into the graphic display chips. So if any company feels interested about my solution, please feel free to contact me.