Name : Eunhee Ko (Class of 2019 for M.S.)
Thesis
: A numerical study on real time simulation for mean value model of diesel engine based on artificial neural network
Current status
: Senior research engineer, MPSE
Embedded Files
Name : Wonjun Yoon (Class of 2019 for M.S. / Class of 2025 for Ph.D.)
Thesis
: (M.S. thesis) A numerical study on performance characteristics of virtual heavy duty HCCI engine fueled with hydrogen-methane blend under low load ranges
: (Ph.D. thesis) A numerical study on energy management strategies and machine learning based prediction for durability and degradation characteristics of PEMFC
Current status
: Senior research engineer, KOCETI(Korea Construction Equipment Technology Institute )
Name : Hewwon Choi (Class of 2020 for M.S.)
Thesis
: Comparative analysis on the battery performance according to positive electrode active material for the 55kWh class electric vehicle lithium-ion battery
Current status
: Techno Park, Gangwon
Name : Jonghyun Kim (Class of 2021 for M.S.)
Thesis
: 1D-3D co-simulation analysis of the next-generation micro gas turbine combustor with on-board reformer
Current status
: Ph.D. course, NGENESYS Laboratory, Department of mechanical engineering, Chosun University
Name : Kanmin Ju (Class of 2021 for M.S.)
Thesis
: Model in the loop simulation based on 1D-3D coupling analysis for down-sized diesel engine for range extender
Current status
: Ph.D. course, NGENESYS Laboratory, Department of mechanical engineering, Chosun University
Name : Seungmin Kim (Class of 2022 for M.S.)
Thesis
: A numerical study on prediction and optimization of knocking under 800cc down-sized gasoline engine for off-road mobility
Current status
: Ph.D. course, Jet Propulsion Laboratory, Department of mechanical engineering, Inha University
Name : Ochang Kwon (Class of 2022 for M.S.)
Thesis
: Model-in-the-loop simulation based on numerical study for ESS integrated gas turbine system
Current status
: Research engineer, KATECH(Korea Automotive Technology Institute), Yeongkwang
Name : Jeongtae Bae (Class of 2022 for M.S.)
Thesis
: Numerical analysis on the performance and emission characteristics of small compression ignition engine fueled with Ammonia-Diesel blend
Current status
: Research engineer, KOCETI(Korea Construction Equipment Technology Institute )
Name : Jiwoon Kim (Class of 2023 for M.S.)
Thesis
: Numerical study on the performance of electric vehicle using cell-to-vehicle (C2V) extension of Lithium-ion secondary batteries
Current status
: Research engineer, MPSE
Name : Saehyun Oh (Class of 2023 for M.S.)
Thesis
: A numerical analysis on combustion characteristics of direct injection hydrogen engine: Effect of injection angle and equivalence ratio
Current status
: NEXTfoam, Seoul
Name : Junyoung Kim (Class of 2024 for Ph.D)
Thesis
: A study on the heat treatment effect in the wire arc additive manufacturing process for application to pressurized water reactor repairing
Current status
: Postdoctoral Researcher, Aerospace Talent Development Bootcamp, Chosun University
Page updated
Google Sites
Report abuse