Available Tools

For specific tools and/or how to use them, please, see Jeff in his office (EE 209).

Tool Room

(DO NOT REMOVE FROM TOOL ROOM)

    • Miscellaneous Nuts, Bolts, Screws, Nails, and Washers
    • Miscellaneous Knobs, Grommets, Terminals, Spacers, and Connectors
    • Miscellaneous Cables
    • Miscellaneous Cutters
    • Various Screwdrivers
    • Various Wrenches (Adjustable and Fixed)
    • Belt and Circular Sander
    • Dremels
    • Band Saw
    • Table Saw
    • PCB Cutter
    • Small & Large Via Insertion Tools (See Jeff if you want to use these)
    • Drill Press
    • Hammers (Normal, Ball Peen)
    • Hacksaw
    • Woodsaw
    • Hand Threader
    • Square Tool (90° and 45°)
    • Motor/Inductor Winding Tool
Image take with thermal camera, showing component failure in the bottom right.

Around the EE Building

    • Thermal Camera
    • Reflow Ovens
      • ECE 223 & 235
      • Requires Solder Paste - See Jeff or Paul
    • Hot Air Gun
      • How To
      • Solder Paste Recommended - See Jeff or Paul
    • Battery Charger for Large and Small Batteries
    • Microscopes
    • Soldering Irons
    • Portable Oscilloscope
      • 100 MHz Maximum
    • 4 Channel Oscilloscope
      • Great for observing serial communications (SPI, RS-232, etc.)
      • See Jeff
    • Spectrum Analyzer
      • Up to 1.8 GHz
      • See Jeff