Publications
Editorials/Prefaces:
E1. M. S. Shadloo*, Book Editing, Title: “Computational Fluid Dynamics 2020”, Mathematics, 2022, https://doi.org/10.3390/books978-3-0365-2785-7
E2. A. Maleki*, M. Alhuyi Nazari, W. Zhang, M. S. Shadloo, Special Issue: “Thermal Systems Modeling by Using Machine Learning Methods”, Frontiers in Energy Research, ID: 789642.
E3. M. S. Shadloo*, O. Mahian, M. H. Doranehgard, Special Topics on Turbulent and Multiphase Flows, Physics of Fluids, DOI: 10.1063/5.0066618
E4. M. S. Shadloo*, A. Rahmat, L. K. B. Li, O. Mahian, A. Alagumalai, High-performance computing and machine learning applied in thermal systems analysis, Journal of Thermal Analysis and Calorimetry, DOI : 10.1007/s10973-021-10952-7
E5. M. S. Shadloo*, Book Editing, Title: “Aero/Hydrodynamics and Symmetry”, Symmetry, 2020, https://doi.org/10.3390/books978-3-03936-893-8
E6. M. S. Shadloo*, L. K. B. Li, M. H. Doranehgard, Special Issue: “Multiphase and Turbulent Flows in Energy Engineering Applications”, Journal of Energy Resources Technology, 2020, DOI: 10.1115/1.4048337.
E7. M. S. Shadloo*, H. Xu, O. Mahian, A. Maheri, Special Issue: “Fundamental and Engineering Thermal Aspects of Energy and Environment”, Journal of Thermal Analysis and Calorimetry, 2020, DOI : 10.1007/s10973-019-09212-6
E8. M. S. Shadloo*, M.R. Safaei, M. Hopp-Hirschler, Special Issue: “Fluid Flow & Heat and Mass Transfer through Passages with Complex Geometries for Advanced Technology Applications”, International Journal of Numerical Method for Heat and Fluid Flow, 2019, DOI: 10.1108/HFF-11-2019-0807
E9. M. S. Shadloo*, Editorial on the special issue of Heat and Mass Transfer (Springer) after the 3rd Iranian Conference on Heat and Mass Transfer, 2019, Heat and Mass Transfer, DOI: 10.1007/s00231-019-02674-2
E10. M. S. Shadloo*, O. Mahian, Special Issue: “Recent Advances in Heat and Mass Transfer”, Journal of Thermal Analysis and Calorimetry, 2018, DOI : 10.1007/s10973-018-7718-5.
Invited Papers/Book Chapters:
I1. M. S. Shadloo*, A. Hadjadj, D. J. Bodony, F. Hussain, S. K. Lele, "Effects of Heat Transfer on Transitional States of Supersonic Boundary Layers", Center for Turbulence Research, Stanford University, Proceedings of the Summer Program, 2016, 175-184.
I2. M. R. Safaei, M. S. Shadloo, E. P. B. Filho, M. Dahari, Book Ch.: "Performance Evaluation of Nanouids in a Rib-Microchannel for Electronics Cooling Application", in the book: Electronics Cooling, InTech Publications, 2016.
I3. M. R. Safaei, G. Ahmadi, M. S. Goodarzi, H. R. Goshayeshi, M. S. Shadloo, M. Dahari, "Heat Transfer and Pressure Drop in Fully Developed Turbulent Flows of Graphene Nanoplatelets Silver/Water Nanouids", Fluids, 2016, 1 (20), 1-12.
I4. M. S. Shadloo*, R. Weiss, M. Yildiz, R. A. Dalrymple, "Numerical Simulations of the Breaking and Non-breaking Long Waves", International Journal of Offshore and Polar Engineering, 2015, 25 (1), 1-7.
Journal Papers:
J1. M. Mesgarpour, R Habib, M. S. Shadloo, N. Karimi*, A combination of large eddy simulation and physics-informed machine learning to predict pore-scale flow behaviours in fibrous porous media: A case study of transient flow passing through a surgical mask, Engineering Analysis with Boundary Elements 2023 (149) 52–70.
J2. S. Behaien, B. Aghel, M.S. Shadloo, Application of water scrubbing technique for biogas upgrading in a microchannel, Korean Journal of Chemical Engineering, 2023 (40), 145–154.
J3. K. Nilpuenga, P. Kaseethong, M. Mesgarpour, M. S. Shadloo, S. Wongwises*, A novel temperature prediction method without using energy equation based on physics-informed neural network (PINN): A case study on plate circular/ square pin-fin heat sinks, Engineering Analysis with Boundary Elements, 2022 (145), 404-417.
J4. M. Vakilha, M. Hopp-Hirschler, M.S. Shadloo*, A fully explicit incompressible Smoothed Particle Hydrodynamics method for multiphase flow problems, Engineering Analysis with Boundary Elements, 2022 (143), 501-524.
J5. B. Aghel, S. Janati, S. Wongwises, M.S. Shadloo, Review on CO2 capture by blended amine solutions, International Journal of Greenhouse Gas Control, 2022 (119), 103715.
J6. M. Celep, S. Sharma, A. Hadjadj, M. Yildiz, M. Kloker, M. S. Shadloo*, Control of Laminar to Turbulence Transition in Heated/Cooled High-Speed Boundary Layer Using Streamwise Velocity Streaks, Physical Review Fluids, 2022 (7) 053904.
J7. F. Almasi, M. Hopp-Hirschler, A. Hadjadj, M. S. Shadloo*, A Smoothed Particle Hydrodynamics Method for Coupled Multiphase Electro-Thermo-Hydrodynamics Problems, Energies, 2022 (15) 2576.
J8. B. Aghel, S. Behaein, S. Wongwises, M. S. Shadloo, A review of recent progress in biogas upgrading: With emphasis on carbon capture, Biomass and Bioenergy, 2022 (160), 106422.
J9. F. Almasi, M. S. Shadloo*, A. Hadjadj, M. Ozbulut, N., Tofighi, M. Yildiz, Numerical simulations of multi-phase electro-hydrodynamics' flows using a simple incompressible smoothed particle hydrodynamics method, Computers and Mathematics with Applications, 2021 (81), 772-785.
J10. M. S. Shadloo*, Application of support vector machines for accurate prediction of convection heat transfer coefficient of nanofluids through circular pipes, International Journal of Numerical Methods for Heat & Fluid Flow, 2021(31) 2660-2679.
J11. W. Zhang, A. Maleki, F. Pourfayaz, M. S. Shadloo, An artificial intelligence approach to optimization of an off-grid hybrid wind/hydrogen system, International Journal of Hydrogen Energy, 2021 (46) 12725-12738.
J12. S. Janati, B. Aghel, M. S. Shadloo, The effect of alkanolamine mixtures on CO2 absorption efficiency in T-Shaped microchannel, Environmental Technology & Innovation, 2021 (24) 102006.
J13. A. Haghighi, A. Maleki, M. El Haj Assad, L. Chen, M. Alhuyi Nazari, M. S. Shadloo, A review on heat transfer characteristics of cryogenic heat pipes, Journal of Thermal Analysis and Calorimetry, 2021 https://doi.org/10.1007/s10973-021-10918-9
J14. M. Ghalandari, A. Maleki, M. S. Shadloo, M. El Haj Assad, Applications of intelligent methods in various types of heat exchangers: a review, Journal of Thermal Analysis and calorimetry, 2021, 2021(145) 1837-1848.
J15. M. S. Shadloo, A. Rahmat, A. Karimipour, S. Wongwises, Estimation of pressure drop of two-phase fluid in horizontal pipes using artificial neural networks, Journal of Energy Resources Technology, 2020, 142(11): 112110.
J16. M. Mendez, M. S. Shadloo*, A. Hadjadj, Heat-transfer analysis of a transitional boundary layer over a concave surface with Görtler vortices by means of direct numerical simulations, Physics of Fluids, 2020 (32) 074111.
J17. Ch. Keepaiboon, A. S. Dalkilic, O. Mahian, H. S. Ahn, S. Wongwises, P. K. Mondal, M. S. Shadloo, Two-phase flow boiling in a microfluidic channel at high mass flux, Physics of Fluids, 2020 (32), 093309.
J18. A. Haghighi, M. S. Shadloo*, A. Maleki, M. Y. A. Jamalabadi, Using Committee Neural Network for Prediction of Pressure Drop in Two-Phase Microchannels, Appl. Sci. 2020, 10(15), 5384.
J19. A. Maleki, M. S. Shadloo*, A. Rahmat, Application of Artificial Neural Networks for Producing an Estimation of High-Density Polyethylene, Polymers (2020) 12 (10), 2319.
J20. M. Y. A. Jamalabadi, M. S. Shadloo, A. Karimipour, Maximum Obtainable Energy Harvesting Power from Galloping-Based Piezoelectrics, Mathematical Problems in Engineering, 2020, https://doi.org/10.1155/2020/6140853
J21. S. Rostami, M. Afrand, A. Shahsavar, M. Sheikholeslami, R. Kalbasi, S. Aghakhani, M. S. Shadloo, H. F. Oztop, A review of melting and freezing processes of PCM/Nano-PCM and their application in energy storage, Energy, 2020 (211), 118698.
J22. S. Rostami, S. Aghakhani, A. H. Pordanjani, M. Afrand, G. Cheraghian, H. F. Oztop, M. S. Shadloo, A review on the control parameters of natural convection in different shaped cavities with and without nanofluid, Processes 2020, 8(9), 1011.
J23. S. Rostami, M. Sepehrirad, A. Dezfulizadeh, A. K. Hussein, A. S. Goldanlou, M. S. Shadloo*, Exergy Optimization of a Solar Collector in Flat Plate Shape Equipped with Elliptical Pipes Filled with Turbulent Nanofluid Flow: A Study for Thermal Management, Water 2020, 12(8), 2294.
J24. H. Eshgarf, R. Kalbasi, A. Maleki, A. Karimipour, M. S. Shadloo, A review on the properties, preparation, models and stability of hybrid nanofluids to optimize energy consumption, Journal of Thermal Analysis and Calorimetry, 2020, In press.
J25. M. Ghalandari, A. Maleki, A. Haghighi, M. S. Shadloo, M.A. Nazari, I. Tlili, Applications of nanofluids containing carbon nanotubes in solar energy systems: A review, Journal of Molecular Liquids, 2020, 113476.
J26. F. Kabir, M. Gulfraz, G. K. Raja, M. Inam-ul-Haq, M. Awais, M. S. Mustafa, S. U. Khan, I. Tlili, M. S. Shadloo, Screening of native hyper-lipid producing microalgae strains for biomass and lipid production, Renewable Energy, 2020 (160) 1295-1307.
J27. B. Abedi, E.P.M. Castaño, E. Heidaryan, M.S. Shadloo, Pore-scale visualization on polymer flooding: application of singular value decomposition-based image analysis method, Journal of Porous Media 2020, 23 (6).
J28. W. Liu, M. S. Shadloo, I. Tlili, A. Maleki, Q-V. Bach, The effect of alcohol–gasoline fuel blends on the engines’ performances and emissions, Fuel, 2020 (276) 117977.
J29. R. Alamian, R. Shafaghat, H. Amiri, M. S. Shadloo, Experimental assessment of a 100 W prototype horizontal axis tidal turbine by towing tank tests, Renewable Energy, 2020 (155) 172-180.
J30. Z. Abdelmalek, R. Alamian, M. S. Shadloo, A. Maleki, A. Karimipour, Numerical study on the performance of a homogeneous charge compression ignition engine fueled with different blends of biodiesel, Journal of Thermal Analysis and Calorimetry, https://doi.org/10.1007/s10973-020-09513-1
J31. W. He, M.M. Namar, Z. Li, A. Maleki, I. Tlili, M.S. Shadloo, Thermodynamic analysis of a solar-driven high-temperature steam electrolyzer for clean hydrogen production, Applied Thermal Engineering, 2020 (172), 115152.
J32. Y. Zheng, M.S. Shadloo, H. Nasiri, A. Maleki, A. Karimipour, I. Tlili, Prediction of Viscosity of Biodiesel Blends Using Various Artificial Model and Comparison with Empirical Correlations, Renewable Energy, 2020 (153) 1296-1306.
J33. L. Zhu, M. Awais, H.M.A. Javed, M.S. Mustafa, I. Tlili, S.U. Khan, M.S. Shadloo, Photo-catalytic pretreatment of biomass for anaerobic digestion using visible light and Nickle oxide (NiOx) Nanoparticles prepared by sol gel method, Renewable Energy, 2020 (154), 128-135.
J34. A. Maleki, M. Elahi, M.E.H. Assad, M.A. Nazari, M.S. Shadloo, N. Nabipour, Thermal conductivity modeling of nanofluids with ZnO particles by using approaches based on artificial neural network and MARS, Journal of Thermal Analysis and Calorimetry, 2020, 1-12.
J35. N. Wang, A. Maleki, M. A. Nazari, I. Tlili*, M. S. Shadloo, Thermal Conductivity Modeling of Nanofluids Contain MgO Particles by Employing Different Approaches, Symmetry 2020, 12 (2), 206.
J36. H. Waqas, S. U. Khan, I. Tlili*, M. Awais, M. S. Shadloo, Significance of bioconvective and thermally dissipation flow of viscoelastic nanoparticles with activation energy features: Novel biofuels significance, Symmetry 2020, 12 (2), 214.
J37. R. Ellahi*, F. Hussain, S. A. Abbas, M. M. Sarafraz, M. Goodarzi, M. S. Shadloo, Study of Two-Phase Newtonian Nanofluid Flow Hybrid with Hafnium Particles under the Effects of Slip, Inventions 2020, 5(1), 6.
J38. N. Khan, M.S. Hashmi, S.U. Khan, F. Chaudhry, I. Tlili, M. S. Shadloo, Effects of Homogeneous and Heterogeneous Chemical Features on Oldroyd-B Fluid Flow between Stretching Disks with Velocity and Temperature Boundary Assumptions, Mathematical Problems in Engineering 2020, Article ID 5284906
J39. M. I. Shahrestani, A. Maleki, M.S. Shadloo, I. Tlili*, Numerical Investigation of Forced Convective Heat Transfer and Performance Evaluation Criterion of Al2O3/Water Nanofluid Flow inside an Axisymmetric Microchannel, Symmetry 2020, 12(1), 120.
J40. M. Raza, R. Ellahi*, Sadiq M. Sait, M. M. Sarafraz, M. S. Shadloo, Ifraheem Waheed, Enhancement of heat transfer in peristaltic flow in a permeable channel under induced magnetic field using different CNTs, Journal of Thermal Analysis and Calorimetry, https://doi.org/10.1007/s10973-019-09097-5
J41. A. Asadi, O. N. Kadijani, M. H. Doranehgard, Q. Xiong*, M. S. Shadloo, L. K. B. Li Numerical study on the application of biodiesel and bioethanol (biomass derived fuels) in a multiple injection diesel engine, Renewable Energy, 2020 (150), 1019-1029.
J42. M.Y.A. Jamalabadi*, R. Alamian, W-M Yan, L. K. B. Li , S. Leveneur, M. S. Shadloo , Effects of Nanoparticle Enhanced Lubricant Films in Thermal Design of Plain Journal Bearings at High Reynolds Numbers, Symmetry 2019, 11(11), 1353.
J43. A. Komeilibirjandi, A. H. Raffiee, A. Maleki*, M. A. Nazari, M. S. Shadloo, Thermal conductivity prediction of nanofluids containing CuO nanoparticles by using correlation and artificial neural network, Journal of Thermal Analysis and Calorimetry (2019). https://doi.org/10.1007/s10973-019-08838-w.
J44. S. Sharma, M. S. Shadloo, A. Hadjadj, M. J. Kloker*, Control of oblique-type breakdown in a supersonic boundary layer employing streaks, Journal of Fluid Mechanics, 2019 (873), 1072-1089
J45. S. Sharma, M. S. Shadloo*, A. Hadjadj, Turbulent Flow Topology in Supersonic Boundary Layer with Wall Heat Transfer, International Journal of Heat & Fluid Flow 2019 (78) 108430
J46. M.M. Sarafraz, M.S. Shadloo, Z. Tian, I. Tlili, T. A. Alkanhal, M.R. Safaei, M. Goodarzi, M. Arjomandi, Convective Bubbly Flow of Water in an Annular Pipe: Role of Total Dissolved Solids on Heat Transfer Characteristics and Bubble Formation, Water 2019, 11(8), 1566
J47. M.Y. A. Jamalabadi*, M. Ghasemi, R. Alamian, E. Afshari, S. Wongwises, M.M. Rashidi, M. S. Shadloo, A 3D Simulation of Single-Channel High-Temperature Polymer Exchange Membrane Fuel Cell Performances. Appl. Sci. 2019, 9, 3633.
J48. M.Y. A. Jamalabadi, M. Ghasemi, R. Alamian, S. Wongwises, M. Afrand, M. S. Shadloo, Modeling of Subcooled Flow Boiling with Nanoparticles under the Influence of a Magnetic Field, Symmetry, 2019, 11(10), 1275.
J49. H. Amiri, R. Shafaghat*, R. Alamian, M.S. Shadloo, Study of Horizontal Axis Tidal Turbines (HATT) Performance and Investigation on the Optimum Fixed Pitch Angle Using CFD: Case study of Iran, International Journal of Numerical Method for Heat and Fluid Flow, 2019, DOI (10.1108/HFF-05-2019-0447)
J50. M. Ebrahimpour, R. Shafaghat*, R. Alamian, M. S. Shadloo, “Numerical Investigation of Savonius Vertical Axis Wind Turbine and Evaluation of the Effect of Overlap Parameter in both Horizontal and Vertical Direction”, Symmetry, 2019, 11 (6) 821.
J51. S. A. Atyabi, E. Afshari, S. Wongwises, W-M. Yan, A. Hadjadj, M. S. Shadloo*, Effects of assembly pressure on PEM fuel cell performance by taking into accounts electrical and thermal contact resistances, Energy, 2019 (179) 490-501.
J52. M. S. Shadloo*, “Numerical Simulation of Compressible Flows by Lattice Boltzmann Method”, Numerical Heat Transfer, Part A, 2019, 75 (3) 167-182.
J53. S. Toghyani, E. Afshari*, E. Baniasadi, M. S. Shadloo, Energy and exergy analyses of a nanofluid based solar cooling and hydrogen production combined system, Renewable Energy, 2019, 141, 1013-1025.
J54. D.V. Shenoy, M. S. Shadloo*, A. Hadjadj, J. Peixinho, Direct numerical simulations of laminar and transitional flows in diverging pipes, International Journal of Numerical Methods for Heat and Fluid Flow, 2019 DOI (10.1108/HFF-02-2019-0111)
J55. A. Piquet, B. Zebiri, A. Hadjadj*, M. S. Shadloo “A Parallel High-Order Compressible Flows Solver with a Domain Decomposition Method in the Generalized Curvilinear Coordinates System”, International Journal of Numerical Methods for Heat and Fluid Flow, 2019, DOI (10.1108/HFF-01-2019-0048)
J56. R. Fatehi, A. Rahmat, N. Tofighi, M. Yildiz*, M. S. Shadloo, "Density-Based Smoothed Particle Hydrodynamics Methods for Incompressible Flows", Computers & Fluids, 2019 (185) 22-33.
J57. S. Toghyani, S. Fakhradini, E. Afshari, E. Baniasadi, M.Y.A. Jamalabadi*, M. S. Shadloo, “Optimization of operating parameters of a polymer exchange membrane electrolyzer”, International Journal of Hydrogen Energy, 2019 (44) 6403-6414.
J58. M. Hopp-Hirschler*, M.S. Shadloo, U. Nieken, “Viscous Fingering Phenomena in the Early Stage of Polymer Membrane Formation”, Journal of Fluid Mechanics, 2019 (864) 97-140.
J59. M. Q. Nguyen, M. S. Shadloo, A. Hadjadj, B. Lebon, J. Peixinho*, “Perturbation threshold and hysteresis associated with the transition to turbulence in sudden expansion pipe flow”, International Journal of Heat and Fluid Flow 76 (2019) 187–196.
J60. S.P. Zanous, R. Shafaghat*, R. Alamian, M. S. Shadloo, M. Khosravi, Feasibility study of wave energy harvesting along the southern coast and islands of Iran, Renewable Energy, 2019 (135) 502-514.
J61. H. Nasiri, M.Y.A. Jamalabadi, R. Sadeghi, M.R. Safaei, M.S. Shadloo, A Smoothed Particle Hydrodynamics Approach for Numerical Simulation of Nano-Fluid Flows: Application to Forced Convection Heat Transfer Over a Horizontal Cylinder, Journal of Thermal Analysis and Calorimetry, 2019 (135) 1733-1741
J62. S. Sharma, M.S. Shadloo*, A. Hadjadj, “Effect of thermo-mechanical non-equilibrium on the onset of transition in supersonic boundary layers”, Heat and Mass Transfer, 2019 (55), 1849-1861.
J63. M. Hopp-Hirschler*, M.S. Shadloo, U. Nieken, “A Smoothed Particle Hydrodynamics Approach for Thermo-Capillary Flows”, Computers & Fluids, 2018 (176) 1-19.
J64. M. Mendez-Gonzlez, M. S. Shadloo*, A. Hadjadj, A. Ducoin, “Boundary Layer Transition Over a Concave Plate Caused by Centrifugal Instabilities”, Computers & Fluids, 2018 (171) 135-153.
J65. S. Sharma, M.S. Shadloo*, A. Hadjadj, “Laminar to Turbulent Transition in Supersonic Boundary Layer Flows: Implications of Wall Heat Transfer, Perturbation Intensity and Thermo-Mechanical non-Equilibrium Mean Flow Profiles”, Numerical Heat Transfer, Part A: Applications, 2018 (73) 583-603.
J66. A. Karimipour, S. A. Bagherzadeh, M. Goodarzi, A. A. Alnaqi, M. Bahiraei, M. R. Safaei, M. S. Shadloo, “Synthesized CuFe2O4/SiO2 nanocomposites added to water/EG: Evaluation of the thermophysical properties beside sensitivity analysis & EANN”, International Journal of Heat and Mass Transfer, 2018 (127) 1169-1179.
J67. S. Leveneur*, M. Pinchard, A. Rimbault, M. S. Shadloo, Thierry Meyer, Parameters affecting thermal risk through a kinetic model under adiabatic condition: Application to liquid-liquid reaction system, Thermochimical Acta, 2018 (666) 10-17.
J68. B. Lebon, M.Q. Nguyen, J. Peixinho*, M.S. Shadloo, A. Hadjadj, “A new mechanism for the periodic bursting of the recirculation region of the flow through a sudden expansion in a circular pipe”, Physics of Fluids, 30 (2018) 031701.
J69. R. Sadeghi, M.S. Shadloo*, M. Hopp-Hirschler, A. Hadjadj, U. Nieken, “Three-dimensional lattice Boltzmann simulations of high density ratio two-phase flows in porous media”, Computers & Mathematics with Applications, 2018 (75) 2445-2465.
J70. C. Bonnaud, et al. & M. S. Shadloo, Experimental study and modelling of the consequences of small leaks on buried transmission gas pipeline, Journal of Loss Prevention in the Process Industries, 2018 (55) 303-312.
J71. M. S. Shadloo, A. Hadjadj*, A. Chaudhuri, O. Ben-Nasr" Large-eddy simulation of a spatially-evolving supersonic turbulent boundary layer at M∞=2 ", European Journal of Mechanics - B/Fluids, 2018, (67) 185–197.
J72. M. S. Shadloo*, A. Hadjadj, F. Hussain, "Temperature-Invariant Scaling for Compressible Boundary Layers with Wall Heat Transfer", Heat Transfer Engineering, 2018 (39) 923-932.
J73. S. Mahmoudi Nezhad, A. Rezaniakolaei*, T. Yousefi, M.S. Shadloo, L.A. Rosendahl, "Adiabatic Partition Effect on Natural Convection Heat Transfer inside a Square Cavity: Experimental and Numerical Studies", Heat and Mass Transfer, 2018 (54) 291-304.
J74. M. S. Shadloo*, A. Hadjadj, "Laminar-Turbulent Transition in Supersonic Boundary Layers with Surface Heat Transfer: A Numerical Study", Numerical Heat Transfer, Part A: Applications, 2017, 72 (1) 40-53.
J75. M. Y. A. Jamalabadi*, M. DaqiqShirazi, A. Kosar, M. S. Shadloo,” Effect of injection angle, density ratio, and viscosity on droplet formation in a microfluidic T-junction”, Theoretical and Applied Mechanics Letters, 2017, 7 (1) 243-251.
J76. O. Ben-Nasr, A. Hadjadj*, A. Chaudhuri, M. S. Shadloo, "Assessment of subgrid-scale modeling for large-eddy simulation of a spatially-evolving compressible turbulent boundary layer", Computers & Fluids, 2017, (151) 144-158.
J77. R. Alamian, R. Shafaghat*, M. S. Shadloo, Rasoul Bayani, A. H.Amouei, "An empirical evaluation of the sea depth effects for various wave characteristics on the performance of a point absorber wave energy converter", Ocean Engineering, 2017 (137), 13-21.
J78. R. Sadeghi, M. S. Shadloo*, " Three-dimensional Numerical Investigation of Film Boiling by Lattice Boltzmann Method", Numerical Heat Transfer, Part A: Applications, 2017, 71 (5) 374-385.
J79. A. Ducoin*, M. S. Shadloo, S. Roy, "Direct Numerical Simulation of flow instabilities over Savonius style wind turbine blades", Renewable Energy 2017 (105) 374--385.
J80. A. Karimipour*, A. D'Orazio, M. S. Shadloo, "The effects of different nano particles of Al2O3 and Ag on the MHD nano fluid flow and heat transfer in a microchannel including slip velocity and temperature jump", Physica E, 2017 (86) 146-153.
J81. M.M. Rashidi, M. Nasiri, M. S. Shadloo*, Z. Yang, "Entropy generation in a circular tube heat exchanger using nanofluids: Effects of different modeling approaches", Heat Transfer Engineering, 2017, 38 (9) 853-866.
J82. R. Sadeghi, M. S. Shadloo*, M.Y.A. Jamalabadi, A. Karimipour, "A three-dimensional lattice Boltzmann model for numerical investigation of bubble growth in pool boiling", International Communication in Heat and Mass Transfer, 2016, (79) 58-66.
J83. M. R. Safaei*, M. S. Shadloo, M. S. Goodarzi, A. Hadjadj, H. R. Goshayeshi, M. Afrand, S. N. Kazi, "A Survey on Experimental and Numerical Studies of Convection Heat Transfer of Nanofluids inside Closed Conduits", Advances in Mechanical Engineering, 2016, 8 (10) 1-14.
J84. M. S. Shadloo*, G. Oger, D. Le Touze, Smoothed Particle Hydrodynamics Method for Fluid Flows, Towards Industrial Applications: Motivations, Current state, and Challenges, Computers & Fluids, 2016 (136) 11-34.
J85. R.Sadeghi, M. S. Shadloo*, K. Hooman, "Numerical Investigation of Natural Convection Film Boiling Around Elliptical Tubes", Numerical Heat Transfer, Part A: Applications, 2016, 70 (7), 707-722.
J86. F. Mabood, S.M. Ibrahim, M.M. Rashidi*, M. S. Shadloo, G. Lorenzini, "Non-Uniform Heat Source/Sink and Soret Effects on MHD Non-Darcian Convective Flow past a Stretching Sheet in a Micropolar Fluid with Radiation", International Journal of Heat and Mass Transfer, 2016 (93) 674-682.
J87. M. S. Shadloo, A. Hadjadj*, F. Hussain, "Statistical Behaviour of Supersonic Turbulent Boundary Layers with Heat Transfer at M= 2", International Journal of Heat and Fluid Flow, 2015 (53) 113-134.
J88. M. S. Shadloo*, R. Poultangari, M. Y. A. Jamalabadi, M. M. Rashidi, "A New and Efficient Mechanism for Spark Ignition Engines", Energy Conversion and Management, 2015 (96) 418-429.
J89. A. Hadjadj*, O. Ben-Nasr, M. S. Shadloo, A. Chaudhuri, "Effect of Wall Temperature in Supersonic Turbulent Boundary Layers: A Numerical Study", International Journal of Heat and Mass Transfer, 2015 (81) 426438.
J90. M. S. Shadloo, A. Hadjadj*, A. Chaudhuri, "On the onset of post-shock flow instabilities over concave surfaces", Physics of Fluids, 2014 (26) 076101.
J91. A. Rahmat, N. Tofighi, M. S. Shadloo, M. Yildiz*, "Numerical Simulation of Wall Bounded and Electrically Excited Rayleigh Taylor Instability Using Incompressible Smoothed Particle Hydrodynamics", Colloids and Surfaces A, 2014 (460) 60-70.
J92. R. Fatehi, M. S. Shadloo*, M. T. Manzari, "Numerical Investigation of Two-Phase Secondary Kelvin-Helmholtz Instability", Journal of Mechanical Engineering Science, 2014 (228) 1913- 1924.
J93. M. S. Shadloo, A. Rahmat, M. Yildiz*, "A Smoothed Particle Hydrodynamics Study on the Electrohydrodynamic Deformation of a Droplet Suspended in a Neutrally Buoyant Newtonian Fluid", Computational Mechanics, 2013 (52) 693-707.
J94. M. S. Shadloo*, A. Kimiaeifar, D. Bagheri, "Series solution for heat transfer of continues stretching sheet immersed in a micropolar fluid in the existence of radiation", International Journal of Numerical Methods for Heat and Fluid Flow, 2013 (23) 289-304.
J95. A. Zainali, N. Tofighi, M. S. Shadloo, M. Yildiz*, "Numerical investigation of Newtonian and non-Newtonian multiphase flows using ISPH method", Computer Methods in Applied Mechanics and Engineering, 2013 (254) 99-113.
J96. M. S. Shadloo, A. Zainali, M. Yildiz*, "Simulation of Single Mode Rayleigh-Taylor Instability by SPH Method", Computational Mechanics, 2013 (51) 699-715.
J97. M. S. Shadloo, A. Zainali, M. Yildiz*, A. Suleman, "A Robust Weakly Compressible SPH Method and its Comparison with Truly Incompressible SPH", International Journal for Numerical Methods in Engineering, 2012 (89) 939- 956.
J98. M. S. Shadloo, M. Yildiz*, "Numerical modelling of Kelvin-Helmholtz Instability Using Smoothed Particle Hydrodynamics Method", International Journal for Numerical Methods in Engineering, 2011 (87) 988-1006.
J99. M. S. Shadloo, A. Zainali, S. H. Sadek, M. Yildiz*, "Improved Incompressible Smoothed Particle Hydrodynamics Method for Simulating Flow around Bluff Bodies", Computer Methods in Applied Mechanics and Engineering, 2011 (200) 1008-1020.
J100. M. S. Shadloo*, A. Kimiaeifar, "Application of homotopy perturbation method to find an analytical solution for magneto hydrodynamic flows of viscoelastic Fluids in converging/diverging channels", Journal of Mechanical Engineering Science, 2011, 225(2), 347-353.
Other Peer Reviewed Journal Publications:
R1. M. Mesgarpour, S. Wongwises, M. Yildiz, M. S. Shadloo*, Anew generation of physics-informed machine learning for turbulent flow based on the transient training data set: a case study of the flow passing through pore-scale porous media, Journal of Computational Physics, 2023 (Submitted).
R2. R. Alamian, M. Sawaf, C. Stockinger, A. Hadjadj, M. S. Shadloo*, Surface-Reactive Flow in Porous Media using Iterative Lattice Boltzmann Method for Modelling the Regeneration Process in Soot Filters, International Journal of Heat and Fluid Flow, 2023 (Under Preparation).
R3. M. Vakilha, M. S. Shadloo*, A charge-conservative approach for modeling two-phase electro-hydrodynamics flows using Smoothed particle hydrodynamics, Computer Physics Communications, 2023 (Under Preparation).
R4. M. Vakilha, R. Saghatchi, M. Yildiz, M. S. Shadloo*, A fully explicit incompressible smoothed particle hydrodynamics approach for modeling transient heat transfer and thermo-capillary flows, Engineering Analysis with Boundary Elements, 2023 (Under Preparation).
Conference papers:
C1. M. Mesgarpour, O. Mahian, M. S. Shadloo, S. Wongwises, A study on flow boiling of a hybrid nanofluid within an elliptical solar collector partially filled with pore-scale porous media : A computational study, The 8th International Micro and Nano Flows Conference (MNF-2023), 18 – 20 September 2023, Padova, Italy
C2. M. Mesgarpour, S. Wongwises, M. S. Shadloo, An investigation into the evaporation process in the presence of an electromagnetic field using a hybridised method: Computational analysis and artificial intelligence, 17th International Heat Transfer Conference (IHTC-17), 14 – 18 August 2023, cape Town, South Africa.
C3. C. Siddappa, O. Thomine, A. Hadjadj, G. Gai, M. S. Shadloo, Numerical study of the attenuation of shock waves by a polydisperse water spray, 29th International Colloquium on the Dynamics of Explosions and Reactive Systems (ICDERS 2023), Seoul, Korea 23-28 July 2023.
C4. C. Siddappa, A. Hadjadj, O. Thomine, M. S. Shadloo, Numerical simulation of shock/droplets interaction with poly-dispersion of cloud particles, The 34th International Symposium on Shock Waves (ISSW34) Daegu, Korea 16-21 July 2023.
C5. R. Alamian, M. Sawaf, C. Stockinger, A. Hadjadj, J. Latt, M. S. Shadloo, Surface-Reactive Flow in Porous Media using Iterative Lattice Boltzmann Method for Modelling the Regeneration Process in Soot Filters, 11th European Combustion Meeting, April 26-28, 2023, Rouen, France.
C6. C. Stockinger, R. Alamian, A. Hadjadj, U. Nieken, A. Chinnayya, M. S. Shadloo, Multi-relaxation time LBM model for coke combustion in porous media, 11th European Combustion Meeting, April 26-28, 2023, Rouen, France.
C7. M. Mesgarpour, O. Mahian, M. S. Shadloo, S. Wongwises, Developing physics-informed machine learning (PIML) for turbulent flow based on transient training data set: A case study on flow passing through the pore-scale porous media (PSPM), The 12th TSME International Conference on Mechanical Engineering,13th – 16th December 2022 Phuket, Thailand.
C8. A. Rahmat, M. S. Shadloo, T. D. Montenegro Johnson, Numerical modelling of shape changing stimuli responsive hydrogels using particle-based methods, EFMC14 / 14th European Fluid Mechanics Conference / 13-16 September 2022, Athens, Greece.
C9. M. Mesgarpour, O. Mahian, N. Karimi, M. S. Shadloo, S. Wongwises, Predicting vorticity and velocity variations in flow through the pore-scale porous media based on recurrent neural network-based physics-informed machine learning, UK Fluid Conference 2022, 6-8th September 2022, University of Sheffield
C10. A. Rahmat*, M. Hopp-Hirschler, A. Alexiadis, M. S. Shadloo, Numerical modelling of the dissolution of composite particles, The 15th World Congress on Computational Mechanics (WCCM-XV) & the 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII), July 31- Aug. 5, 2022.
C11. M. Celep, A. Hadjadj, M. S. Shadloo*, Control of Oblique Breakdown Using Streak Employing Method, The 8th European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS Congress 2022 5 – 9 June 2022, Oslo, Norway.
C12. M. Vakilha, M. S. Shadloo*, A fully explicit incompressible SPH method for simulating multiphase flow, Proceedings of the 7th International Conference on Multiphase Flow and Heat Transfer (ICMFHT’22) Lisbon, Portugal – April 07 – 09, 2022
C13. M. Celep, S. Sharma, A. Hadjadj, M. S. Shadloo*, Further Investigations of Heating/Cooling Effects on High-Speed Boundary Layer Breakdown Using Streamwise Velocity Streaks, 10th International Symposium on Turbulence, Heat and Mass Transfer, St. Petersburg, Russia, July 5-8, 2022.
C14. F. Almasi, M. Hopp-Hirschler, A. Hadjadj, U. Nieken, M. S. Shadloo*, Thermo-Capillary Induced Motion in Multiphase System Using Smoothed Particles Hydrodynamics, Proceedings of the 5th World Congress on Momentum, Heat and Mass Transfer (MHMT'20) Lisbon, Portugal– April 15-17, 2020.
C15. R. Alamian, C. Stockinger, A. Hadjadj, U. Tuttlies, U. Nieken, M. S. Shadloo*, Flow Simulation in Complex Porous Media Using Lattice Boltzmann Method, The 16th International Symposium on Numerical Analysis of Fluid Flows, Heat and Mass Transfer - Numerical Fluids 2021, ICNAAM 2021, 19-26 September, Rhodes, Greece.
C16. M. Celep, S. Sharma, A. Hadjadj, M. Yildiz, M. S. Shadloo*, A parametric study of transition control via employing streak in supersonic flows, 6th International Conference on Advances in Mechanical Engineering 20 - 22 October 2021 İstanbul Turkey.
C17. M. S. Shadloo*, M. Hopp-Hirschler, F. Almasi, A. Hadjadj, U. Nieken, Thermo-Capillary Induced Motion in Multiphase System Using Smoothed Particles Hydrodynamics, The 15th International Symposium on Numerical Analysis of Fluid Flows, Heat and Mass Transfer - Numerical Fluids 2020, ICNAAM 2020, 17-23 September, Rhodes, Greece.
C18. D.V. Shenoy, M.Q. Nguyen, M. S. Shadloo*, A. Hadjadj, J. Peixinho, O. K. Matar, Subcritical transition to turbulence in diverging pipe flows, 71st Annual Meeting of the American Physical Society’s Division of Fluid Dynamics, Atlanta, Georgia, November 18-20, 2018, DFD18-001832.
C19. M. Hopp-Hirschler, O. K. Matar, M. S. Shadloo*, Smoothed Particle Hydrodynamics Method for Multi-physics Fluid Flows, 71st Annual Meeting of the American Physical Society’s Division of Fluid Dynamics, Atlanta, Georgia, November 18-20, 2018, DFD18-0018329.
C20. S. Sharma, M. S. Shadloo*, A. Hadjadj, Effect of thermo-mechanical non-equilibrium on the onset of transition in supersonic boundary layers, 12th European Fluid Mechanics Conference, 9-13 September 2018, Vienna, Austria.
C21. M. Hopp-Hirschler, M. S. Shadloo*, U. Nieken, “Thermo-Capillary Flow Using Smoothed Particle Hydrodynamics (SPH) Method”, EECCM-ECFD 2018 Congress, 11-15 June 2018, Glasgow, UK.
C22. H. Nasiri, M.Y.A. Jamalabadi, R. Sadeghi, M. S. Shadloo*, “Numerical simulation of nanofluid forced convection heat transfer over a horizontal cylinder by smooth particle hydrodynamics”, ICHMT2017, 22-23 November, 2017, Babol Noshirvani University of Technology, Babol, Iran.
C23. M. Mendez-Gonzalez, M. S. Shadloo*, A. Hadjadj, A. Ducoin, "Boundary-Layer Transition Over Concave Surfaces Caused by Centrifugal Forces", EUROMECH SYMP. 591: 3-D Instability Mechanisms in Transitional and Turbulent Flows, 18-20 Sept. 2017, Bari, Italy.
C24. M. Q. Nguyen, B. Lebon, M. S. Shadloo*, J. Peixinho, A. Hadjadj, "Transition to Turbulence in a Sudden Expansion Pipe Flow", EUROMECH SYMP. 591: 3-D Instability Mechanisms in Transitional and Turbulent Flows, 18-20 Sept. 2017, Bari, Italy.
C25. B. Lebon*, M. Q. Nguyen, S. Ishizaka, Y. Tasaka, M. S. Shadloo, A. Hadjadj, J. Peixinho, "Experiments with Disturbances on the Flow Through a Sudden Expansion in a Circular Pipe", EUROMECH SYMP. 591: 3-D Instability Mechanisms in Transitional and Turbulent Flows, 18-20 Sept. 2017, Bari, Italy.
C26. M. S. Shadloo*, A. Hadjadj, "Effects of Wall Heat Transfer on the High-Speed Flow Boundary Layer Transition", 16TH European Turbulence Conference, 21-24 August 2017, Stokholm, Sweden.
C27. A. Ducoin*, S. Roy, M. S. Shadloo, "Direct Numerical Simulation of Nonlinear Secondary Instabilities on the Pressure Side of a Savonius Style Wind Turbine", FEDSM2016-7714, ASME 2016 HT/FE/ICNMM, Heat Transfer, Fluids Engineering and Nanochannels, Microchannels, and Minichannels Conferences, July 10-14, 2016, Washington, USA.
C28. M. S. Shadloo,* D. Le Touze, G. Oger, "Mesh-free Lagrangian modelling of fast flow dynamics", Manuscript No.: 2015-TPC-0750, The 25th International Ocean and Polar Engineering Conference, June 21-26, 2015, Kona, Big Island, Hawaii, USA.
C29. M. S. Shadloo*, D. Le Touze, G. Oger, "On the use of SPH method for industrial applications", Manuscript No.: HN10101120337, The 23rd Annual International Conference on Mechanical Engineering-ISME2015, 12-14 May, 2015, Tehran, Iran.
C30. A. Rahmat, M. S. Shadloo and M. Yildiz, "The electrohydrodynamic deformation of quiescent bubble under electric field", 8th International SPHERIC Workshop, 4-6 Jun., 2013, Trondheim, Norway.
C31. A. Rahmat, M. S. Shadloo, N. Tofighi and M. Yildiz, "The simulation of the Rayleigh Taylor Instability for high density ratios and infinity bond number with SPH method", The Third Conference on Particle-Based Methods, 18-20 Sep., 2013, Stuttgart, Germany.
C32. M. S. Shadloo, M. Yildiz, Simulation of Rayleigh-Taylor Instability by Smoothed Particles Hydrodynamics: Advantages and Limitations", 7th Symposium on Numerical Analysis of Fluid Flow and Heat Transfer, 19-25 Sept., 2012, Kos, Greece.
C33. M. S. Shadloo, M. Yildiz, "Two-Phase Electrohydrodynamics by Smoothed Particles Hydrodynamic", International Conference on Numerical Methods in Multiphase Flows, 12-14 June, 2012, Penn State University, State College, Pennsylvania, United States.
C34. S. Shaikhnasri, S. H. Ghotbi Dezfouli, M. S. Shadloo, "Heat transfer enhancement of continues stretching sheet in the existence of radiation due to use of micropolar fluid ", ISME2012-1268, 15-17 May, 2012, Shiraz University, Shiraz, Iran.
C35. M. S. Shadloo, M. Yildiz, "Kelvin-Helmholtz Instability by SPH", 2nd conference on Particle-Based Methods (PARTICLES 2011), Barcelona, Spain, 26-28 Oct. 2011.
C36. M. S. Shadloo, M. Yildiz, "ISPH Modeling of Rayleigh-Taylor Instability", 6th International SPHERIC SPH Workshop, Hamburg University of Technology, Germany, 8-11 June 2011, 179-186.
C37. M. S. Shadloo, A. Zainali, M. Yildiz, "Bluff-body Simulation by SPH Method with Relatively High Reynolds Number in Laminar Flow Regime", FEDSM-ICNMM 2010-31135, 1-4 Aug. 2010, Montreal, Québec, Canada.
C38. M. S. Shadloo, A. Zainali, M. Yildiz, "Fluid-Structure Interaction Simulation by Smoothed Particles Hydrodynamic", FEDSM-ICNMM 2010-31137, 1-4 Aug. 2010, Montreal, Québec, Canada.
C39. M. S. Shadloo, A. Zainali, M. Yildiz, "Improved Solid Boundary Treatment Method for the Solution of Flow over an Airfoil and Square Obstacle by SPH Method", 5th International SPHERIC SPH Workshop, The University of Manchester, UK, 23-25 Jun. 2010, 37-41.
C40. S. Shaikhnasri, M. S. Shadloo*, "The effect of desicant on the consumptive power of air condition system in the climate of bushehr, ICHVAC2-1107, 1-3 Jun. 2010, Tehran, Iran.
C41. R. Fatehi, M. S. Shadloo, M. T. Manzari, "Investigation of Integration Accuracy in SPH", Sharif University of Technology, IAS-2008-AE0606, Tehran, Iran.