SALADIN

1

2

These are my working drawing to determine the scale I would use.

3

4

5

Engine (OS32 Max), gearbox,diff. and bevel boxes fitted to the chassis.

6

Swing axle arms being fitted.

7

Completed chassis fitted to the all-welded body and suspension units added.

8

9

Mud guards and boxes added.

10

Upper body, showing the turret motor (a servo motor modified), lower left photo.

11

Turret base mounted to the upper body.

12

Here we have the Mock up Turret with many angles to configure.

13

14

OS 32 Max with the modified manifold, clutch, flywheel and fan.

15

The all-welded turret, gun with mantle and exhaust. Lower right photo showing the "Rocking Beam" between the 1st and 2nd wheel station.

16

Each wheel station has 10 "Oil-lite" bearings. Lower right photo shows the Rack and pinion steering.

17

Electronics,lights, fuel tanks, turret roof and rear deck fitted.

18

Final details added before painting.

19

These next set of photo;s showing in detail the finish Saladin, not to be seen like this again before painting.

20

21

22

23

24

Primer coat.

25

First coat of gloss.

26

Lower left photo shows the case -harden gears.Top right photo shows the disc-break on the end of the output shaft.

27

28

29

30

31

home

WEB COUNTER