BANDGOOD HIT & MISS

1

INTRO

BANDGOOD HIT & MISS

This engine from Hong Kong represents good value for money, CNC made and assembled unfortunately comes with no instructions or plans, however the electrics are simply plug in with exception of the Red lead with solder tag. This is the ground, Chassis to electronic module (Gold box). The frame is too short for the wheels so requires mounting higher on a boX or plinth like mine.

I found it to track on the spark plug terminal (word to the wise) so i just wrapped some tape around it. setting the adjustments the Carb. 1/3 from closed, tappet 0.5 mm, timing factory pre-set to TDC approx ( I made a earth lead plug to chassis just to check) Supply voltage is 4.7 volts. Ran on lighter fuel.

VIDEO CLIP

2

3

4

WEB COUNTER