Item

Uniden Von Weise V76-310 Photo Optic Sensor Kit for C-Band Satellite Dish Antenna Actuator Arm Signal Pulse Finder

Replacement optic sensor for any actuator controller requiring this satellite application.

• • Optic Sensor

  • Terminal

Photo Optic Sensor Von Weise V76-311 Replacement for Actuator Arm Mover Antenna Signal Locator on C-Band Satellite Dish

For use with your C-Band Satellite Dish.

• • Von Weise C-Band Actuator Arm Photo-Optic Sensor

  • Part # V76-311

Potentiometer 10k Kit 10 Turn Ohm Terminal Bar and Worm Gear Precision Pot Variable Resister C-Band Satellite Dish, Device Equipment Machine

• • Multi turn wire wound potentiometer.

  • Number of turns: 10

  • Power rating: 2 W

  • Resistance tolerance: 5 %

  • Linearity: 0,25 %

  • Temperature coefficient: 20 ppm/C

  • Operating temperature: -55...+125 C

  • Shaft: metal + 6,35 mm (1/4")

  • Mounting hole: 10 mm (3/8")

  • Resistance value: 10 kohm linear

  • Terminal Bar

  • Worm Gear

Venture Super Sensor II

A high precision sensor for tracking linear position necessary for satellite reception systems. (Available in Reed or Hall Effect Actuators)

Inquire about availability with 4, 6, or 8 pole magnets providing 32, 48, or 64 pulses per inch (Acme) or 20, 30, or 40, pulses per inch (Ballscrew) according to your needs.

SuperJack Reed Sensor; Plug In

The SuperJack Actuator line has been discontinued by the manufacturer, however many actuators are still in operation. We still have reed sensors in stock.

Accordian Weather Boot 18"

The 18" Accordian Weather Boot protects your actuator from severe weather conditions like freeze, sea salt, etc.

Accordian Weather Boot 24"

The 24" Accordian Weather Boot protects the actuator from severe weather conditions like freeze, sea salt, etc.

Satellite Actuator Motor for Ku-Band Antenna

YH5520 Satellite actuator motor DiSEqC 1.2m Satellite Actuator Motor for Dish Antenna with 13 Input and 18V DC Output Voltage

Key Specifications/Special Features:

• Antenna diameter: 1.2m

• Motor tube length: 180mm

  • Azimuth angle:

    • East: 75°

    • West: 75°

• Elevation angle: 10 to 75&3176;

• Input/output voltage: 13/18V DC

  • Power consumption:

    • Standby mode: 50mA

    • Normal: 200mA

    • Maximum: 350mA

• Rotation speed: 1.9 degrees/s at 13V and 2.5 degrees at 18V

• Satellite positions: 100

• Connector: F

• Command protocol: DiSEqC1.2

• Resynchronize function: yes

• 0 position: yes

• X position: yes

• Appointed position: yes

• Positioning sensor: high resolution hall-effect

• Manual buttons: east/west

Venture 24" Ball Screw Actuator

Venture Maxi BS Actuators combine a highly efficient long life Ball Screw with a DC voltage electric motor providing a high performance ready to install linear drive system

30% duty cycle motor rating

Clutch

Limit switches

Reed, Hall Effect, Potentiometer and other sensor options

3000 lb static capacity / 1500 lb dynamic compression or tension

Lifetime lubrication

Designed for outdoor use

Compression or tension loads

Trunnion, Clevis, or Tube clamp mounting

High strength steel tube assembly with all-steel load support members

Efficient, long life Ball Screw

12VDC, 24VDC, 36VDC, 90VDC, or 120VAC Rectified to 120VDC Gearbox Design

With Accordion Boot, 24" Ball Screw, 1500 lb load, 40 Pulse, 12-16' Suggested mesh dish size

36" Venture Maxi -Ball Screw-Actuator

Venture Maxi BS Actuators combine a highly efficient long life Ball Screw with a DC voltage electric motor providing a high performance ready to install linear drive system.

Standard strokes 18, 24, 32, 36, and 48 inches (custom lengths available)

1500 Load Capacity

30% duty cycle motor rating

Clutch

Limit switches

Reed, Hall Effect, Potentiometer and other sensor options

3000 lb static capacity / 1500 lb dynamic compression or tension

Lifetime lubrication

Designed for outdoor use

Compression or tension loads

Trunnion, Clevis, or Tube clamp mounting

High strength steel tube assembly with all-steel load support members

Efficient, long life Ball Screw

12VDC, 24VDC, 36VDC, 90VDC, or 120VAC Rectified to 120VDC Gearbox Design

Venture 36" Maxi Actuator

36", 1000 lb load, 32 Pulse, 16' Suggested mesh dish size

Venture Maxi Actuators combine a long life Acme Screw with a DC voltage electric motor providing a high performance ready to install linear drive system.

Picture

No picture available at this time