Ku band DiSeq Motor

Item

Potentiometer 10k Kit 10 Turn Ohm Terminal Bar and Worm Gear Precision Pot Variable Resister C/Ku-Band Satellite Dish, Device Equipment Machine

• • Multi turn wire wound potentiometer.

  • Number of turns: 10

  • Power rating: 2 W

  • Resistance tolerance: 5 %

  • Linearity: 0,25 %

  • Temperature coefficient: 20 ppm/C

  • Operating temperature: -55...+125 C

  • Shaft: metal + 6,35 mm (1/4")

  • Mounting hole: 10 mm (3/8")

  • Resistance value: 10 kohm linear

  • Terminal Bar

  • Worm Gear

Actuator Positioner Satellite Dish Antenna 18" Jack Venture C/Ku-Band Arm with Limit Reed Sensor Automatic Waterproof Mover

Jack Venture 18" actuator with limit and reed sensor. Quiet operation, precision gearing. Actuator arms for the automatic/remote positioning of satellite dishes. The actuators are supplied with an adjustable fixing kit to allow the actuator to be fixed to a variety of brackets. Adjustable limit switch protection, Anti-rust epoxy coated steel construction, Waterproof with 2 seals and 3 drain holes, Sealed super reed sensor (48 pulses/inch).

SG2100

DiSEqC horizon to horizon motor

Azmuth Angle: 70˚EAST ~ 70˚WEST ( 140˚ ) Adjustable

Antenna Diameter: 1.2M Max. (33 lbs / 15 KG)

Elevation Angle: 25˚~75˚

Input / Output Voltage: 13 / 18 VDC

Power Consumption: 50 mA (Standby mode), 200 mA (Normal), 350 mA (Max.)

Rotation Speed: 1.9˚ / sec ( at 13V) ; 2.5 ˚/ sec ( at 18V)

Operating Temperature: -20˚C to +60˚C

Satellite Positions: 60

Connector: F Type

Command Protocol: DiSEqC 1.2

Resynchronize Function: YES

Goto Position 0 Function: YES

Goto X Function: YES

Positioning Sensor: High Resolution Hall Effect Sensor

EAST / WEST Limit: Adjustable Hardware and Programmable Software

Manual Button: EAST / WEST