MIcrowave Engineering

วิศวกรรมไมโครเวฟ (Microwave Engineering)

1. บทนำ

1.1 ทำไมต้องเรียนไมโครเวฟ (Lec1 and Lec2)

1.2 สมการแมกซ์เวลล์เบื้องต้น (Lec1 and Lec2)

1.3 เงื่อนไขขอบเขต

2. สายนำสัญญาณ (IntroTL, TL-Eqs1)

VSWR, Genelized reflection coeff, Special cases of lossless terminated lines

3. แผนภาพสมิตซ์และการประยุกต์ใช้ (Smith Chart and Applications)

3.1 การใช้ Smith Chart 01

3.2 การหา Zin เมื่อให้ ZL และความยาว

3.3 การหา ZL เมื่อให้ Zin และความยาว

3.4 การหา ความยาวเมื่อให้ Zin และ ZL

3.5 การแมตชิ่งโดยใช้สตับเดี่ยว (Single stub) [SS01, SS02]

3.5.1 Ex: Single Shunt Short Stub

3.5.2 Ex: Single Shunt Open Stub

3.5.3 Ex: Single Series Short Stub

3.5.4 Ex: Single Series Open Stub

3.6 การแมตชิ่งด้วย L และ C (Two Element Lumped Impedance Matching)

3.6.1 แนวคิดและวิธีการ พร้อมตัวอย่าง

3.6.2 ตัวอย่าง

3.7 การแมตชิ่งโดยใช้สตับคู่ (Double stub)

3.7.1 แนวคิดและหลักการของสตับคู่

3.7.2 ตัวอย่างการแมตซ์โดยใช้สตับคู่ 1

3.7.3 ตัวอย่างการแมตซ์โดยใช้สตับคู่ 1 (ต่อ)

4. ท่อนำคลื่น (Waveguide)

4.1 พื้นฐานท่อนำคลื่น

4.2 Modes of propagations in Waveguide

4.3 Cutoff frequencies in Rectangular WG [Part 1, Part2]

4.4 ตัวอย่าง rectangular wg ที่โมดต่าง ๆ เทียบกับ CST

4.5 Wave impedances of rectangular waveguide

4.6

4.7 Circular waveguide

4.7.1 cutoff frequencies and fields

4.8 Elliptic wavguide

4.8.1 cutoff frequencies and fields

5. S-parameters

5.1 พื้นฐาน S-parameters และที่มา (Part 1, part 2)

5.2 Signal Flow graph and S-parameters

5.3 ตัวอย่างการใช้งานของ ABCD

5.4 Relationship between ABCD and S parameters

6. สายนำสัญญาณไมโครสตริป

7. ตัวแบ่งกำลังงาน

8. การออกแบบวงจรกรองความถี่ (Microwave filter design)

8.1 Introduction to Microwave filter design

8.2 Lowpass filter design (lowpass prototype->scaling)

8.3 Stepped Impedance LPF (scaling->implementation)

8.4 Stepped Impedance Design with EM simulator

8.5 LPF using strubs

8.6 BPF and BSF using quater wave stubs

8.7 Coupled line bandpass filter