PUBLICATIONS

"       "

S. Cheon, J. Yu, S.H. Lee, J. Lee, S.H. Park, T. Lee*

Metals and Materials International, accepted.

"Effect of Yb addition on the microstructure, mechanical properties and flame resistance of Mg-Gd-Y-Zn alloys"

S. Zhou, J. Kim*, Z. Zhang, Y. Cao, T. Lee, B. Jiang*

Metals and Materials International, accepted.

"      "

J.H. Song, S.Y. Lee, S. Cheon, S.H. Lee, J. Yu, S. Baek, J. Roh, S.H. Park, T. Lee*

Journal of Magnesium and Alloys, accepted.

"Effect of Al content on the microstructural characteristics and tensile and fatigue properties of extruded SEN Mg alloys"

J.-Y. Lee, J.H. An, H.J. Kim, J.H. Bae, J.S. Suh, T. Lee, S.H. Park*

Journal of Magnesium and Alloys, in press.

"Normalizing Design to Control Ferrite/Pearlite Band Structure and Optimize Mechanical Properties of S355NL Steel for Offshore Wind Power Generation"

C.H. Lee, S.H. Lee, J. Lee, T. Lee*

Transactions of Materials Processing, Vol. 34, No. 6, pp. 316-321.

"Advancing constitutive analysis of the hot deformation behavior of Ti-3Al-8V-6Cr-4Mo-4Zr via physics-aided machine learning"

S.H. Lee, C. Lee, Y. Ro, S.H. Park, J.W. Jo, C.S. Lee, T. Lee*

Journal of Materials Research and Technology, Vol. 39, pp. 5487-5498.

"Grain refinement and mechanical enhancement in high-speed-extruded Mg–5Bi–3Al Alloy via Si microalloying"

G.W. An, N.T.H. Ha, S.-C. Jin, H. Yu, T. Lee, S.H. Park*

Journal of Materials Research and Technology, Vol. 39, pp. 3206-3214.

"Influence of initial texture on twinning and slip behaviors in rolled AZ31 magnesium alloy during three-point bending deformation"

J.U. Lee, T. Lee, J.W. Won*, S.H. Park*

Journal of Magnesium and Alloys, Vo. 13, No. 10, pp. 5166-5183.

"Effect of Al addition on microstructure, texture evolution and mechanical properties of Mg-1Zn-1Y-0.1Mn alloy sheets"

Y. Ma, S.-Y. Yu, Y.M. Kim, T. Lee*, B.-C. Suh*

Journal of Magnesium and Alloys, Vol. 13, No. 7, pp. 3066-3080.

"Comparative study of dynamic recrystallization behavior, microstructural characteristics, and mechanical properties of high-speed-extruded AZ31 and BA56 magnesium alloys"

G.W. An, S.-C. Jin, T. Lee, S. Jo*, S.H. Park*

Journal of Magnesium and Alloys, Vol. 13, No. 7, pp. 3004-3019.

"Application of Multi-objective Optimization to Direct Energy Deposition of IN625"

S. Kim, J. Yu, J.G. Kim, T. Lee*

Transactions of Materials Processing, Vol. 34, No. 2 (2025) pp.105-110.

"Role of Y in High-Strength Mg-Y-Cu-Ni Alloy System with Long-Period Stacking Ordered Phase"

M. Li, J. Kim*, Z. Zhang, G. Yu, B. Jiang, T. Lee*, F. Pan

Metals and Materials International, Vol. 31, No. 4 (2025) pp. 936-944.

"Role of Double Quenching and Tempering in Improving the Low-Temperature Impact Toughness of SA350 LF3 Steel"

D.J. Park, J. Lee, J.H. Song, S.H. Lee, S.H. Heo, C.H. Lee N.Y. Kim, J.M. Lee, T. Lee*

Metals and Materials International, Vol. 31, No. 9, pp. 2569-2577.

"Numerical Study on Dynamic Behavior of Layered Structures under High-Velocity Impact"

S.H. Park, J.H. Seok, Y.S. Kim, Y.A. Kim, S.K. Sathish Kumar, T. Lee*, Y.H. Kim

International Journal of Aeronautical & Space Sciences, Vol. 26 (2025) pp. 97-107.