PUBLICATIONS

"Ultrasonic Reflection Characteristics of Wrinkle in Sheet Metal Forming —Evaluation by FDTD Analysis and Ultrasonic Measurement Using Model Specimen—"

Y. Segawa, T. Kurimyama, Y. Marumo*, T. Lee, Y. Imamura, T. Nonaka, Y. Sakata

Materials Transactions, vol. 60 (2019) pp. 997-1003.

"Fabrication of long tubular parts made of tungsten-heavy alloys by inductive bonding of multiple tubes"

Z.S. Park, S.-J. Lee, T. Lee, J.H. Kim, Y.H. Moon*

International Journal of Refractory Metals and Hard Materials, vol. 85 (2019) p. 105058.

"Improved tensile properties of AZ31 Mg alloy subjected to various caliber-rolling strains"

J.H. Lee, B.J. Kwak, T. Kong, S.H. Park, T. Lee*

Journal of Magnesium and Alloys, vol. 7 (2019) pp. 381-387.

"Tempcore Process Simulator to Analyze Microstructural Evolution of Quenched and Tempered Rebar"

C.S. Park, H.J. Yi, Y.-T. Kim, S.W. Han, T. Lee, Y.H. Moon*

Applied Sciences, vol. 9 (2019) p. 2938.

"Enhanced yield symmetry and strength-ductility balance of caliber-rolled Mg-6Zn-0.5Zr with ultrafine-grained structure and bulk dimension"

T. Lee*, B.J. Kwak, T. Kong, J.H. Lee, S.W. Lee, S.H. Park

Journal of Alloys and Compounds, vol. 803 (2019) pp. 434-441.

"Comparative study on the effects of Cr, V, and Mo carbides for hydrogen-embrittlement resistance of tempered martensitic steel"

J. Lee, T. Lee*, D.-J. Mun, C.M. Bae, C.S. Lee*

Scientific Reports, vol. 9 (2019) pp. 5219.

"High-strength AZ91 alloy fabricated by rapidly solidified flaky powder metallurgy and hot extrusion"

T. Lee, M. Yamasaki*, Y. Kawamura, J. Go, S.H. Park*

Metals and Materials International, vol. 25 (2019) pp. 372-380.

"Sinter-joining of Cu54Zr22Ti18Ni6 BMG powder to Cu powder using spark plasma sintering"

J. Kim*, T. Lee*, F. Pan

Materials Letters, vol. 242 (2019) pp. 55-57.

“Enhancing Superplasticity of Ultrafine-Grained Ti-6Al-4V without Imposing Severe Plastic Deformation”

D. Kim, J.W. Won, C.H. Park, J.K. Hong, T. Lee*, C.S. Lee*

Advanced Engineering Materials, vol. 21 (2019) p. 1800115.

"Improved cold-rollability of duplex lightweight steels utilizing deformation-induced ferritic transformation"

Y. Lee, J.N. Kim, G. Kim, T. Lee*, C.S. Lee*

Materials Science and Engineering: A, vol. 742 (2019) pp. 835-841.

"High strain-rate superplasticity of AZ91 alloy achieved by rapidly solidified flaky powder metallurgy"

T. Lee*, M. Yamasaki*, Y. Kawamura, Y. Lee, C.S. Lee

Materials Letters, vol. 234 (2019) pp. 245-248.

"Effects of carbon content on the tensile and fatigue properties in hydrogen-charged Fe-17Mn-xC steels: the opposing trends"

S.W. Song, J.-N. Kim, H.J. Seo, T. Lee*, C.S. Lee*

Materials Science and Engineering: A, vol. 724 (2018) pp. 469-476.

“Ultrasonic Reflection Characteristics of Wrinkle in Sheet Metal Forming”

Y. Segawa, T. Kurimyama, Y. Marumo*, T. Lee, Y. Imamura, T. Nonaka, Y. Sakata

Journal of the Japan Society for Technology of Plasticity, vol. 59 (2018) pp. 47-52.

“Prediction of hole expansion ratio for various steel sheets based on uniaxial tensile properties”

J.H. Kim, Y.J. Kwon, T. Lee*, K.-A. Lee, H.S. Kim, C.S. Lee*

Metals and Materials International, vol. 24 (2018) pp. 187-194.

“Effects of Drawing Strain and Post-Annealing Conditions on Microstructural Evolution and Tensile Properties of Medium- and High-Carbon Steels”

S.H. Park, T. Lee, S.-H. Kim, C.S. Lee*

Metals and Materials International, vol. 23 (2017) pp. 1176-1187.

“Enhanced resistance to delayed cracking of deep-drawn lean duplex stainless steel: the role of residual stress”

S.H. Jung, T. Lee*, S.W. Song, Y.J. Kwon, H.-G. Kang, D.-C. Chae, C.S. Lee*

Korean Journal of Metals and Materials, vol. 55 (2017) pp. 544-549.

“Increased resistance to hydrogen embrittlement in high-strength steels composed of granular bainite”

D.H. Shim, T. Lee*, J. Lee, H.J. Lee, J.-Y. Yoo, C.S. Lee*

Materials Science and Engineering: A, vol. 700 (2017) pp. 473-480.

“Constitutive Analysis of Electrically-Assisted Tensile Deformation of CP-Ti Based on Non-Uniform Thermal Expansion, Plastic Softening and Dynamic Strain Aging”

T. Lee, J. Magargee, M.K. Ng, J. Cao*

International Journal of Plasticity, vol. 94 (2017) pp. 44-56.

“Effect of the amount and temperature of prestrain on tensile and low-cycle fatigue properties of Fe-17Mn-0.5C TRIP/TWIP steel”

S.W. Song, J.H. Lee, T. Lee*, C.S. Lee*

Materials Science and Engineering: A, vol. 696 (2017) pp. 493-502.

“Study on Molding Properties of Obsidian Perlite”

K. Kawamura, S. Mori, Y. Marumo*, T. Lee*, Y Imamura, T. Masu, A. Eto

International Journal of Earth Sciences and Engineering, vol. 10 (2017) pp. 358-360.

“Development of New Apparatus to Evaluate Ultrasonic Reflection Characteristic for Wrinkling in Press Forming”

Y. Segawa, T. Kuriyama, Y. Marumo*, T. Lee*, Y. Imamura, T. Nanaka, Y Sakata

International Journal of Earth Sciences and Engineering, vol. 10 (2017) pp. 170-174.

“Brazing method to join a novel Cu54Ni6Zr22Ti18 bulk metallic glass to carbon steel”

J. Kim, T. Lee*

Science and Technology of Welding and Joining, vol. 22, (2017) pp. 714-718.

“Interface Characterization of Al–Cu Microlaminates Fabricated By Electrically Assisted Roll Bonding”

M. Moradi, M.-K. Ng, T. Lee, J. Cao, Y.N. Picard*

Journal of Micro and Nano-Manufacturing, vol. 5 (2017) pp. 031001-031007.

“Effect of Al addition on low-cycle fatigue properties of hydrogen-charged high-Mn TWIP steels”

S.W. Song, Y.J. Kwon, T. Lee*, C.S. Lee*

Materials Science and Engineering: A, vol. 677 (2016) pp. 421-430.

“Role of deformation twins in static recrystallization kinetics of high-purity alpha titanium”

J.W. Won, T. Lee, S.-G. Hong, Y. Lee, J.H. Lee, C.S. Lee*

Metals and Materials International, vol. 22 (2016) pp. 1041-1048.

“Anisotropic properties of directed energy deposition (DED)-processed Ti–6Al–4V”

S. Wolff*, T. Lee, E. Faierson, K. Ehmann, J. Cao*

Journal of Manufacturing Processes, vol. 24 part 2 (2016) pp. 397-405.

“Effects of Vanadium Carbides on Hydrogen Embrittlement of Tempered Martensitic Steel”

J. Lee, T. Lee*, Y.J. Kwon, D.-J. Mun, J.-Y. Yoo, C.S. Lee*

Metals and Materials International, vol. 22 (2016) pp. 364-372.

“Microstructural Evolution and Strain-Hardening Behavior of Multi-Pass Caliber-Rolled Ti-13Nb-13Zr”

T. Lee, K.-T. Park, D.J. Lee, J. Jeong, S.H. Oh, H.S. Kim, C.H. Park, C.S. Lee*

Materials Science and Engineering: A, vol. 648 (2015) pp. 359-366.

“Superior Bonding Properties of Dissimilar Steel Joint Produced by Electroslag Remelting”

Y. Lee, T. Lee, B.H. Kim, C.S. Lee*

Metals and Materials International, vol. 21 (2015) pp. 1054-1060.

“Role of Mo/V Carbides in Hydrogen Embrittlement of Tempered Martensitic Steel”

J. Lee, T. Lee, Y.J. Kwon, D.-J. Mun, J.-Y. Yoo, C.S. Lee*

Corrosion Reviews, vol. 33 (2015) pp. 433-441.

“Tribological and Corrosion Behaviors of Warm- and Hot-Rolled Ti-13Nb-13Zr Alloys in Simulated Body Fluid Conditions”

T. Lee, E. Mathew, S. Rajaraman, G. Manivasagam*, A.K. Singh, C.S. Lee*

International Journal of Nanomedicine, vol. 10 (2015) pp. 207-212.

“Role of Cu on Hydrogen Embrittlement Behavior in Fe-Mn-C-Cu TWIP Steel”

Y.J. Kwon, T. Lee, J. Lee, Y.S. Chun, C.S. Lee*

International Journal of Hydrogen Energy, vol. 40 (2015) pp. 7409-7419. 

“Manufacturing ultrafine-grained Ti-6Al-4V bulk rod using multi-pass caliber-rolling”

T. Lee, D.S. Shih, Y. Lee, C.S. Lee*

Metals, vol. 5 (2015) pp. 777-789.

“Surface modification of multi-pass caliber-rolled Ti alloy with dexamethasone-loaded graphene for dental applications”

H.S. Jung, T. Lee, I.K. Kwon, H.S. Kim, S.K. Hahn, C.S. Lee*

ACS Applied Materials & Interfaces, vol. 7 (2015) pp. 9598-9607.

“Phase Transformation and Its Effect on Mechanical Characteristics in Warm-Deformed Ti-29Nb-13Ta-4.6Zr Alloy”

T. Lee, M. Nakai, M. Niinomi, C.H. Park, C.S. Lee*

Metals and Materials International, vol. 21 (2015) pp. 202-207.

“Enhancing yield strength by suppressing detwinning in a rolled Mg-3Al-1Zn alloy with {10-12} twins”

J.H. Lee, T. Lee, S.W. Song, S.H. Park, C.S. Lee*

Materials Science and Engineering: A, vol. 619 (2014) pp. 328-333.

“Integrated constitutive model for flow behavior of pure titanium considering interstitial solute concentration”

J.W. Won, C.H. Park, T. Lee, C.S. Lee*

Metals and Materials International, vol. 20 (2014) pp. 1017-1025.

“Space-holder effect on designing pore structure and determining mechanical properties in porous titanium”

B. Lee, T. Lee, Y. Lee, D.J. Lee, J. Jeong, J. Yuh, S.H. Oh, H.S. Kim, C.S. Lee*

Materials & Design, vol. 57 (2014) pp. 712-718.

“Microstructure tailoring to enhance strength and ductility in Ti-13Nb-13Zr for biomedical applications”

T. Lee, Y.-U. Heo, C.S. Lee*

Scripta Materialia, vol. 69 (2013) pp. 785-788.

"Grain refinement effect on cryogenic tensile ductility in a Fe-Mn-C twinning-induced plasticity steel"

M. Koyama, T. Lee, C.S. Lee, K. Tsuzaki*

Materials & Design, vol. 49 (2013) pp. 234-241.

"Effects of tungsten addition on the microstructure and mechanical properties of microalloyed forging steels"

J. Zhao, T. Lee, J.H. Lee, Z. Jiang, C.S. Lee*

Metallurgical and Materials Transactions A, vol. 44 (2013) pp. 3511-3523.

"Internal-variable analysis of high-temperature deformation behavior of Ti-6Al-4V: A comparative study of the strain-rate-jump and load-relaxation tests"

T. Lee, J.H. Kim, S.L. Semiatin, C.S. Lee*

Materials Science and Engineering: A, vol. 562 (2013) pp. 180-189.

"Mechanisms of tensile improvement in caliber-rolled high-carbon steel"

T. Lee, C.H. Park, S.-Y. Lee, I.-H. Son, D.-L. Lee, C.S. Lee*

Metals and Materials International, vol. 18 (2012) pp. 391-396. 

"Tensile deformation of Fe-Mn-C TWIP steel with ultrafine elongated grain structure"

T. Lee, M. Koyama, K. Tsuzaki, Y.-H. Lee, C.S. Lee*

Materials Letters, vol. 75 (2012) pp. 169-171.

"Work hardening associated with ε-martensitic transformation, deformation twinning and dynamic strain aging in Fe-17Mn-0.6C and Fe-17Mn-0.8C TWIP steels"

M. Koyama, T. Sawaguchi, T. Lee, C.S. Lee*, K. Tsuzaki

Materials Science and Engineering: A, vol. 528 (2011) pp. 7310-7316.

"Enhancing tensile properties of ultrafine-grained medium-carbon steel utilizing fine carbides"

T. Lee C.H. Park, D.-L. Lee, C.S. Lee*

Materials Science and Engineering: A, vol. 528 (2011) pp. 6558-6564.

"The effect of porosity on the elasticity of pure titanium: An atomistic simulation"

S.-Y. Min, Y. Kim, T. Lee, S. Seo, H.S. Jung, D. Kim, J. Lee, B.-J. Lee*

Metals and Materials International, vol. 16 (2010) pp. 421-425.