Internation Journals

1. C.P. Afsal Ahammed, S. Nandi, A.R. Paul, B. Sreejith, M.J. Jose, and M. Mukherjee, On the Characteristic Evaluation of Bimetallic Interface of Carbon Steel (EN31) and Aluminium (AA4043) for Wire Arc Additive Manufacturing, Metals and Materials International, 2025. (doi: 10.1007/s12540-025-01919-6)

2. D. Mukherjee, Y. Tiwari, E. Chandrasekar, N. Mandal, D. Qiu, M. Mukherjee, M. Easton, and H. Roy, Unravelling crack tip damage mechanisms: In-situ tensile assessment of Al-6Zn-2.1Mg-2Cu alloy strengthened by Ti, Zr, and Sc micro-alloying, Engineering Fracture Mechanics, 2024, 312, 110663. (doi: 10.1016/j.engfracmech.2024.110663)

3. A. Banerjee, Y. Tiwari, S. Dutta, M. Mukherjee, and S. Das, Investigating the layer-wise arc and melt-pool characteristics of near-substrate wire arc-directed energy deposited NiCrMo-3 alloy using image processing, Proc. IMechE. Part E: Journal of Process Mechanical Engineering, 2024, 1-14. (doi: 10.1177/09544089241301949)

4. A.R. Paul, J. Dumbre, D. Qiu, M. Easton, M. Mazur, and M. Mukherjee, “Grain Refinement and Morphological Control of Intermetallic Compounds: A Comprehensive Review”, Current Opinion in Solid State and Materials Science, 2024, 33, 101200. (doi: 10.1016/j.cossms.2024.101200)

5. M. Maity, Y. Tiwari, R. Manivannan, and M. Mukherjee, Influence of in-situ hammering on microstructural, mechanical and residual stress behaviour of Inconel 718 during wire arc additive manufacturing. Progress in Additive Manufacturing, 2024. (doi: 10.1007/s40964-024-00890-9)

6. S. Biswas, A.R. Paul, Y. Singh, and M. Mukherjee, “Enhanced prediction and optimization of WEDM for titanium alloy (grade 5) with hybrid artificial neural network based meta-heuristics”, International Journal on Interactive Design and Manufacturing, 2024. (doi: 10.1007/s12008-024-02058-9)

7. A. Sil, Y. Tiwari, D. Mukherjee, S. Nandi, and M. Mukherjee, “Investigating the influence of post-deposition heat treatment (PDHT) on the characteristic changes in wire arc additively manufactured 410 martensitic stainless steel thin-wall structure”, Materials Today Communications, 2024, 40, 110039. (doi: 10.1016/j.mtcomm.2024.110039) 

8.  A. Sil, Y. Tiwari, S. Mandal, M. Mukherjee, A. Samanta, and R. Porwal, “Influence of heat input on bead geometry, microstructure and hardness characteristics of dissimilar 410 martensitic stainless steel weld deposits on 304L substrate”, Advances in Materials and Processing Technologies, (doi: 10.1080/2374068X.2024.2373581)

9. S. Yadav, M. Mukherjee and D. Singh, “Review of Current Challenges in the Implementation of WAAM for Ti-6Al-4V Alloys”, Int. J. Adv. Manuf. Technol., 2024. Published online on 11 June 2024. (doi: 10.1007/s00170-024-13958-1)

10. M. Mukherjee, P. Sarkar, S. Barman, P.K. Mallisetty, V. Paleu, and S. Bhaumik, “Investigating the Wear Resistance of AISI 410/AISI 2205 Hybrid Weld Cladding on Annealed EN 8 Medium Carbon Steel”, Proc. IMechE. Part J: Journal of Engineering Tribology, 2024, 1-20. (doi: 10.1177/13506501241255989)

11.  Y. Tiwari, A. Datta, E. Chandrasekar, M. Mukherjee, S. Das, and D. Chatterjee, “Numerical Analysis of Stress and Distortion in Bulk Deposited Structures of Inconel 625 Alloy: Influence of Deposition Strategies”, CIRP Journal of Manufacturing Science and Technology, 2024, 51, 293–312. (doi: 10.1016/j.cirpj.2024.05.002)

12.  A.R. Paul, S. Singh, J. Hirwani, S. Yadav, C. Dekiwadia, M. Mukherjee, and D. Kalyanasundaram, “Effect of Heat Treatment on Material property and Cell Viability of Wire Arc Additively Manufactured Ti6Al4V”, ACS Applied Bio Materials, 2024, 7(5), 3096–3109. (doi: 10.1021/acsabm.4c00130)

13. A.R. Paul, S.A. Babalola, A.K. Yadav, M. Mukherjee and D. Singh, “Development of water recycling based mechanical drain cleaning system”, Water Practice & Technology, 2024, 20, 1-15. (doi: 10.2166/wpt.2024.101) 

14. Y. Tiwari, S. Nandi, R. Manivannan, D. Chatterjee, M. Mukherjee, and V. Rajinikanth, “Investigating the Influence of Various Tool Path Trajectories on the Anisotropic Behaviour of Bulk NiCrMo-3 alloy Fabrication by WADED Process”, Materials Characterization, 2024, 209, 113742. (doi: 10.1016/j.matchar.2024.113742) 

15. D. Mukherjee, H. Roy, B. Chandrakanth, N. Mandal, S.K. Samanta and M. Mukherjee, “Enhancing properties of Al-Zn-Mg-Cu alloy through microalloying and heat treatment”, Materials Chemistry and Physics, 2024, 314, 128881. (doi: 10.1016/j.matchemphys.2024.128881) 

16. S. Senkathir, S. Pramanik, and M. Mukherjee, “Nanomechanical Analysis of Friction Welded Similar PEEK/Aluminium Nanocomposites: Effect of Metal Particle Reinforcement”, Polymer Composites, 2023. (doi: 10.1002/pc.28033)

17. S. Senkathir, S. Pramanik, and M. Mukherjee, “Friction Welding Joint Analysis of Dissimilar Nanocomposites: PEEK/Aluminium to PEEK/Titanium”, Journal of Applied Polymer Science, 2023, e55046. (doi: 10.1002/app.55046) 

18. M. Mukherjee, R. Mukherjee, A. Rahul, D. Das, S. Datta, “Evaluation of Ca-alloyed and HAp-reinforced magnesium matrix surface composite properties developed by friction stir processing”, Materials and Manufacturing Processes, Accepted on 03 Oct. 2023. (doi: 10.1080/10426914.2023.2289669) 

19. S. Mohanty, M. Mukherjee, C. Mandal, S.M. Shariff, Md. Aqeel, A. Senapati, T. K. Pal, “Understanding the Microstructural Evolution and Tensile Characteristics of Low Nickel Austenitic Stainless-Steel Welds Fabricated by Diode LASER”, International Journal of Pressure Vessels and Piping, 2023, 206, 105087. (doi: 10.1016/j.ijpvp.2023.105087)

20. S. Biswas, Y. Singh and M. Mukherjee, “Unified supervised learning and optimization technique for wire electrical discharge machining of various grades of alloys: stochastic algorithm combined neural network approach”, Proc. IMechE. Part C: Journal of Mechanical Engineering Science, 2023. (doi: 10.1177/09544062231208526)

21. A.R. Paul, M. Mukherjee and M.K. Sahu, "Influence of copper interlayer on the interface characteristics of stainless steel–aluminium transitional structure in wire arc directed energy deposition", Rapid Prototyping Journal, 2023. (doi: 10.1108/RPJ-03-2023-0089)

22. A.R. Paul, M. Mukherjee, D. Singh, R. Manivannan and M.K. Mondal, “Influence of Deposition Mode on Microstructural and Mechanical Properties of Wire Arc Additive Manufactured 308L Stainless Steel Structures”, Journal of Materials Engineering and Performance, 2023. (doi: 10.1007/s11665-023-08453-9) 

23. Y. Tiwari, M. Mukherjee, D. Chatterjee and R. Manivannan, “Influence of inter-layer rotation in parallel deposition strategies on the microstructure, texture, and mechanical behaviour of Inconel-625 during directed energy deposition”, Materials Characterization, 197, 2023, 112711. (doi: 10.1016/j.matchar.2023.112711) 

24. A. Rahul, M. Mukherjee, D. Das and S. Datta, “Impact of particle addition and aging on the friction stir processed magnesium matrix surface composite properties”, JOM, accepted on January 17, 2023. (doi: 10.1007/s11837-023-05714-9)

25. A. Mishra, A.R. Paul, M. Mukherjee, and R.K. Singh, "Bimetallic structure of Ti6Al4V/IN718 with CuSi interlayer for wire-arc directed energy deposition process", Metals and Materials International, accepted on December 29, 2022. (doi: 10.1007/s12540-022-01381-8)

26. S. Biswas, A.R. Paul, A.R. Dhar, Y. Singh and M. Mukherjee, “Multi-material modelling for wire electro-discharge machining of Ni-based super alloys using hybrid neural network and stochastic optimization techniques”, CIRP Journal of Manufacturing Science and Technology, 41, 2023, 350-364. (doi: 10.1016/j.cirpj.2022.12.005)

27. D. Mukherjee, M. Mukherjee, N. Mandal, S.K. Samanta and A. Maiti, “Effect of micro-alloying on the characteristics of as-cast Al-Zn-Cu-Mg-X alloy with varying Cu and Zn”, Materials Today Communications, 34, 2023, 105445. (doi: 10.1016/j.mtcomm.2023.105445) 

28. T. Das, M. Mukherjee, D. Chatterjee, S.K. Samanta and A.K. Lohar, “A comparative evaluation of the microstructural characteristics of L-DED and W-DED processed 316L stainless steel”. CIRP Journal of Manufacturing Science and Technology, 40, 2023, 114-128. (doi: 10.1016/j.cirpj.2022.11.010) 

29. A.R. Paul, A. Mishra, M. Mukherjee and D. Singh, “Stainless steel to aluminium joining by interfacial doping with Al2O3 powder in wire arc direct energy deposition process”. Materials Letters, 330, 2023, 133349. (doi: 10.1016/j.matlet.2022.133349) 

30. A.R. Paul, M. Mukherjee, D. Singh and M.K. Mondal, “Interfacial characterization of additively manufactured stainless steel to aluminium thin wall with nickel interlayer”. Journal of Materials Research, 2022. (doi: 10.1557/s43578-022-00732-w) 

31. A.R. Paul, S. Bose, A.R. Dhar, S. Biswas, M. Mukherjee and R. Manivannan, “Interface Optimisation of Dissimilar Wire Arc Additive Manufactured Wall Through ANN-TOPSIS Conjugate Algorithm.” Trans. Indian Inst. Met., 2022. (doi: 10.1007/s12666-022-02712-4) 

32. A. Mishra, A.R. Paul, M. Mukherjee, R.K. Singh, and A.K. Sharma, "Evaluation of Cu-Ti dissimilar interface characteristics for wire arc additive manufacturing process", Rapid Prototyping Journal, 2022.  (doi: 10.1108/RPJ-05-2022-0142) 

33. S. Banerjee, A.R. Paul, A.R., M. Mukherjee, and S.R.K. Vadali, “A new adaptive process control scheme for efficient wire arc additive manufacturing of thin-walled SS308L component”. Int. J. Adv. Manuf. Technol., 2022, 121, 8099–8113. (doi: 10.1007/s00170-022-09912-8) 

34. E. Chandrasekar, M. Mukherjee, D. Singh and S. Chidambaram, "Evaluation of dieless hydroforming process for manufacturing of variable cross-section tubular structures". Proc. IMechE. Part C: Journal of Mechanical Engineering Science, 2022, 21 May. (doi: 10.1177/09544062221101469).

35. S. Biswas, Y. Singh, M. Mukherjee, S. Datta, S. Barman and R. Manivannan, “Design of Multi-material Model for Wire Electro-discharge Machining of SS304 and SS316 Using Machine Learning and MCDM Techniques”. Arab. J. Sci. Eng., 2022, 30 March.  (doi: 10.1007/s13369-022-06757-x).

36. D. Singh, R. Choudhury, M. Mukherjee, and Y. Singh, “Development of non-linear models to evaluate the NiTi SMA spring actuator”. J. Mech. Engg. Sci., 2022, 16(1), 8754–8769. (doi: 10.15282/jmes.16.1.2022.09.0692).

37. R. Manivannan, Y. Tiwari, M. Mukherjee, B. Maji, and A. Chatterjee. “Effect of bidirectional and switchback deposition strategies on microstructure and mechanical properties of wire arc additive manufactured Inconel 625”, Int. J. Adv. Manuf. Technol., 2022, 119, 4845–4861. (doi: 10.1007/s00170-022-08687-2). 

38. A.R. Paul, M. Mukherjee, and D. Singh, “A Critical Review on the Properties of Intermetallic Compounds and Their Application in the Modern Manufacturing”, Cryst. Res. Technol., 2022, 57(3), 2100159. (doi: 10.1002/crat.202100159).

39. A.R. Paul, M. Mukherjee, R. Manivannan, S. Kundu, and A. Chatterjee, “Development of near homogeneous properties in wire arc additive manufacturing process for near-net shaped structural component of low-carbon steel”, Proc. IMechE. Part C: Journal of Mechanical Engineering Science, October 2021. (doi: 10.1177/09544062211045489).

40. A.R. Dhar, D. Gupta, A.R. Paul, S.S. Roy, and M. Mukherjee, “Hybridized Artificial Neural Network-Based Expert Systems for Modelling of Robotic- Wire and Arc Additive Manufacturing Process” J. Inst. Eng. India Ser. C, 2021, 102, 1461–1471. (doi: 10.1007/s40032-021-00762-z).

41. S. Senkathir, S. Pramanik, and M. Mukherjee, “Evaluation of process parameters for poly (ether ether ketone) to poly (ether ether ketone) friction welded joint”, Proc. IMechE. Part J: Journal of Engineering Tribology, June 2021. (doi: 10.1177/13506501211025120).

42. D. Singh, R. Choudhury, Y. Singh, and M. Mukherjee, “Workspace analysis of 3-DOF U-shape base planar parallel robotic motion stage using shape memory alloy restoration technique (SMART) linear actuators” SN Appl. Sci., 2021, 3, 511. (doi:10.1007/s42452-021-04490-y). 

43. D. T. Arun Kumar, K. G. Basava Kumar, A. Pattanaik and M. Mukherjee, "Improvement of Al–Si Hypoeutectic Cast Alloy Properties by Forging with Grain Refiner and Modifier", Transactions of the Indian Institute of Metals, 2020, 73, 3105–3112. 

44. S. Bhaumik,  M. Mukherjee,  P. Sarkar, A. Nayek, V. Paleu. "Microstructural and Wear Properties of Annealed Medium Carbon Steel Plate (EN8) Cladded with Martensitic Stainless Steel (AISI410)", Metals 2020, 10, 958.

45. A. Pattanaik, M. Mukherjee and S.B. Mishra: "Influence of Curing Condition on Thermo-Mechanical Properties of Fly Ash reinforced Epoxy Composite", Composite part B: Engineering, 2019, 176, 107301. 

46. A. Pattanaik, M. Mukherjee and S.C. Mishra: "Effect of environmental aging conditions on the properties of fly ash filled epoxy composites", Advanced Composite Materials, 2019, https://doi.org/10.1080/09243046.2019.1610930. 

47. S.K. Singh, P.K. Raushan, K. Debnath, M. Mukherjee and B.S. Mazumder: “Turbulence characteristics in boundary layers over a regular array of cubical roughness”, ISH Journal of Hydraulic Engineering, 2018, DOI: 10.1080/09715010.2018.1559773 

48. P.K. Raushan, S.K. Singh, K. Debnatha, M. Mukherjee, and B.S. Mazumder: "Distribution of turbulent energy in combined wave current flow", Ocean Engineering, 2018, 167, 310–316.

49. S.K. Singh, D.S.K. Reddy, M. Mukherjee, M. Manikandan, and P. Kumar: "Discussion of “Wave-current generated turbulence over hemisphere bottom roughness" by Barman et al. (2018)", Estuarine, Coastal and Shelf Science, 2018, 208, 49–51.

50. Tapan Sarkar, Manidipto Mukherjee, Tapan Kumar Pal: “Effect of Cu addition on Microstructure and Hardness of As-Cast and Heat Treated High-Cr Cast Iron”, Transactions of the Indian Institute of Metals, 2018, 71(6), 1455–1461. 

51. Mainak Sen, Manidipto Mukherjee, Santosh Kumar Singh and Tapan Kumar Pal:  “Effect of Double-Pulsed Gas Metal Arc Welding (DP-GMAW) Process Variables on Microstructural Constituents and Hardness of Low Carbon Steel Weld Deposits”, Journal of Manufacturing Processes, 2018, 31, 424–439.

52. Manidipto Mukherjee and Tapan Kumar Pal: “Evaluation of microstructural and mechanical properties of Fe-16Cr-1Ni-9Mn-0.12N austenitic stainless steel welded joints”, Materials Characterization, 2017, 131, 406–424.

53. Nikhil Kumar, Manidipto Mukherjee and Asish Bandyopadhyay: “Study on Laser Welding of Austenitic Stainless Steel by Varying Incident Angle of Pulsed Laser Beam”, Optics and Laser Technology, 2017, 94, 296–309.

54. Nikhil Kumar, Manidipto Mukherjee and Asish Bandyopadhyay: “Comparative Study of Pulsed Nd: YAG Laser Welding of AISI 304 and AISI 316 Stainless Steels”, Optics and Laser Technology, 2017, 88, 24-39.

55. Manidipto Mukherjee, Saptarshi Saha, Tapan Kumar Pal and Prasanta Kanjilal: "Influence of Modes of Metal Transfer on Grain Structure and Direction of Grain Growth in Low Nickel Austenitic Stainless Steel Weld Metals", Materials Characterization, 2015, 102, 9-18.

56. Saptarshi Saha, Manidipto Mukherjee, and Tapan Kumar Pal: “Microstructure,  Texture and Mechanical Property Analysis of Gas Metal Arc Welded AISI  304  Austenitic Stainless Steel”, Journal of Materials Engineering and  Performance, 2015, 24(3), 1125-1139.

57. Shilajit Das, Manidipto Mukherjee and Tapan Kumar Pal: “Effect of Grain Boundary Precipitation and delta ferrite formation on Surface Defect of Low Nickel  Austenitic Stainless Steels”, Engineering Failure Analysis, 2015, 54(4), 90- 102.

58.  Mainak Sen, Manidipto Mukherjee and Tapan Kumar Pal: “Evaluation of  Correlations between DP-GMAW Process Parameters and BeadGeometry ", Welding Journal, 2015, 94(8), 265s-279s.

59.  Deb Kumar Adak, Manidipto Mukherjee, Tapan Kumar Pal: “Development of a  Direct Correlation of Bead Geometry, Grain Size and HAZ Width with the GMAW  Process Parameters on Bead-on-plate Welds of Mild Steel ", Transaction of  Indian Institute of Metals, 2015, 68(5), 839-849.

60. M. Mukehrjee, A. Dutta, T.K. Pal, P. Kanjilal and S. Sisodia: "Enhancement of Microstructural and Mechanical Properties by Pulse Mode of Metal Transfer in Welded Modified FerriticStainless Steel", ISIJ International, 2015, 55(7), 1439-1447.

61. M. Mukherjee, J. Saha, P. Kanjilal, T.K. Pal and S. Sisodia: "Influence of Gas Mixtures in GMAW of Modified 409M Ferritic Stainless Steel", Welding Journal, 2015, 94(4), 101s-114s.

62. Subhrajit Debnath, Manidipto Mukherjee and Tapan Kumar Pal: “Study on Microstructure and Mechanical Properties of Thick Low-Alloy Quench and Tempered Steel Welded Joint”, Materials Performance and Characterization, 2014, 3(1), 23-48.

63. Manidipto Mukherjee and Tapan Kumar Pal: “Effect of Modes of Metal Transfer and Microstructure on Corrosion Behaviour of Welded Modified Ferritic Stainless Steel in Acidic Environments”, Journal of Applied Electrochemistry, 2013, 43, 347–365.

64. Manidipto Mukherjee and Tapan Kumar Pal:  “Role of Microstructural Constituents on Surface Crack Formation during Hot Rolling of Standard and Low Nickel Austenitic Stainless Steels”, Acta Metall. Sin. (Engl. Lett.), 2013, 26(2),  206-216.

65. Manidipto Mukherjee and Tapan Kumar Pal: “Influence of Mode of Metal Transfer on Microstructure and Mechanical Properties of Gas Metal Arc Welded Modified Ferritic Stainless Steel”, Metallurgical and Materials Transactions A, 2012, 43A, 1791-1808.

66. M. Mukherjee and T. K. Pal: “Influence of Heat Input on Martensite Formation and Impact Property of Ferritic-Austenitic Dissimilar Weld Metals”, Journal of  Material Science and Technology, 2012, 28(4), 343–352.  

orcid.org/0000-0001-6908-6357